Durability of concrete mixtures containing Iranian electric arc furnace slag (EAFS) aggregates and lightweight expanded clay aggregates (LECA)
Source abstract
Abstract
This article reports the results of an experimental investigation on novel concrete mixtures containing electric arc furnace slag aggregates (EAFS) and lightweight expanded clay aggregates (LECA), focusing on the durability properties. Six concrete mixtures consist of EAFS-natural-LECA (M-Group) and five mixtures of EAFS-LECA (N-Group) compared with 100% EAFS as reference. Workability and density of the mixtures were studied as fresh properties and compressive strength, as well as durability indexes including the electrical resistivity (RCPT and four-point Wenner test), salt-scaling under freeze and thaw cycles, abrasion resistance (abrasive groove length and wear depth), durability under wet and dry cycles, and durability factor under freeze/thaw cycles. Results showed that application of both LECA and natural aggregates, by maintaining the structural-level strength, leads to density adjustment while increasing the freeze/thaw durability factor, improving dimensional stability and controlling the level of cyclic wet/dry-stains. An average increase of durability factor of M-Group and N-Group comparing to the reference were observed up to about 124% and 63% respectively. The results indicated the positive effects of using natural aggregate and LECA on modifications of reference mixture. Measured abrasive groove length ranged between 20 and 23 mm and the depth of wear ranging from 0.1 to 0.3 mm confirming the improving effects of physical structure of EAFS aggregates. The studied mixtures, namely M6 and N5 with 0.744 kg/m 2 and 1.204 kg/m 2 exhibited the lowest salt-scaling mass-loss with 31% and 112% increase compared with the reference.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. World Steel Association · 2022
2. Nippon Slag Association, Types of iron and steel slag [https://www.slg.jp/e/slag/kind.html].
3. The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment10.1016/j.conbuildmat.2013.12.063 ↗
4. Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region10.1016/j.conbuildmat.2012.02.012 ↗
5. Durability of concrete made with EAF slag as aggregate10.1016/j.cemconcomp.2006.02.008 ↗
6. Adegoloye, G., Beaucour A.-L., Ortola S., Noumowé A. J. C., Materials B. Concretes made of EAF slag and AOD slag aggregates from stainless steel process: Mechanical properties and durability. 2015;76:313-21.10.1016/j.conbuildmat.2014.12.007 ↗
7. High performance concrete with electric arc furnace slag as aggregate: Mechanical and durability properties10.1016/j.conbuildmat.2015.10.022 ↗
8. Electric arc furnace slag as natural aggregate replacement in concrete production10.1016/j.cemconcomp.2015.10.004 ↗
9. Durability studies on eco-friendly concrete mixes incorporating steel slag as coarse aggregates10.1016/j.jclepro.2016.04.033 ↗
10. Concrete with EAF steel slag as aggregate: a comprehensive technical and environmental characterisation10.1016/j.compositesb.2015.12.022 ↗
11. A study on suitability of EAF oxidizing slag in concrete: an eco-friendly and sustainable replacement for natural coarse aggregate10.1155/2015/972567 ↗
12. Comparison of properties of steel slag and crushed limestone aggregate concretes10.1016/S0950-0618(02)00095-8 ↗
13. Electric arc furnace slag as coarse recycled aggregate for concrete production10.1007/s40831-015-0029-1 ↗
14. Electric arc furnace slag and its use in hydraulic concrete10.1016/j.conbuildmat.2015.05.003 ↗
15. Mechanical and durability characteristics of concrete containing EAF slag as aggregate10.1016/j.cemconcomp.2009.05.006 ↗
16. Usage of steel slag in concrete as fine and/or coarse aggregate
17. Electric arc furnace granulated slag for sustainable concrete10.1016/j.conbuildmat.2016.06.142 ↗
18. Qasrawi, H., Shalabi F., Asi I. J. C., Materials B. Use of low CaO unprocessed steel slag in concrete as fine aggregate. 2009;23(2):1118-25.10.1016/j.conbuildmat.2008.06.003 ↗
19. Concrete with EAF steel slag as aggregate: a comprehensive technical and environmental characterisation10.1016/j.compositesb.2015.12.022 ↗
20. Pellegrino, C., Gaddo V. J. C., Composites C. Mechanical and durability characteristics of concrete containing EAF slag as aggregate. 2009;31(9):663-71.10.1016/j.cemconcomp.2009.05.006 ↗
21. Pellegrino · 2016
22. Cementitious and Pozzolanic Behavior of Electric arc Furnace Steel Slags10.1016/j.cemconres.2008.11.002 ↗
23. Patel · 2008
24. Strength and durability of concrete made with electric steelmaking slag
25. Reactivity and expansion of electric arc furnace slag in their application in construction10.3989/mc.2001.v51.i263-264.359 ↗
26. Design and elaboration of concrete mixtures using steelmaking slags
27. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
28. Properties of concretes with black/oxidizing electric arc furnace slag aggregate10.1016/j.cemconcomp.2012.09.001 ↗
29. Durability studies on steelmaking slag concretes10.1016/j.matdes.2014.06.002 ↗
30. The performance of steel-making slag concretes in the hardened state10.1016/j.matdes.2014.04.030 ↗
31. Durability studies on fiber-reinforced EAF slag concrete for pavements10.1016/j.conbuildmat.2017.12.121 ↗
32. A study on the durability of structural concrete incorporating electric steelmaking slags10.1016/j.conbuildmat.2017.11.121 ↗
33. Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region10.1016/j.conbuildmat.2012.02.012 ↗
34. Possibility of concrete prepared with steel slag as fine and coarse aggregates: a preliminary study10.1016/j.proeng.2011.11.2667 ↗
35. Electric arc furnace slag in concrete10.1061/(ASCE)0899-1561(2004)16:6(639) ↗
36. Products of steel slags an opportunity to save natural resources10.1016/S0956-053X(00)00102-1 ↗
37. Use of low CaO unprocessed steel slag in concrete as fine aggregate10.1016/j.conbuildmat.2008.06.003 ↗
38. Comparative evaluation of dense-graded and gap-graded asphalt mix incorporating electric arc furnace steel slag and copper mine tailings10.1016/j.jclepro.2016.02.051 ↗
39. Radiological protection and mechanical properties of concretes with EAF steel slags10.1016/j.conbuildmat.2013.10.067 ↗
40. Characterisation and utilisation of steel slag for the construction of roads and highways10.1179/1432891714Z.000000000967 ↗
41. Evaluation of the steel slag incorporation as coarse aggregate for road construction: technical requirements and environmental impact assessment10.1016/j.jclepro.2015.08.094 ↗
42. ASTM E1621 − 13, Annual Book of ASTM Standards, American Society of Testing Materials, Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry, 2013.
43. Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash10.1016/j.conbuildmat.2018.10.080 ↗
44. Roller-compacted concrete pavement made of Electric Arc Furnace slag aggregate: Mix design and mechanical properties10.1016/j.conbuildmat.2017.07.240 ↗
45. BS 6920-2.6:2000+A2:2014. Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Methods of test.
46. BS 6920-1:2014. Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water Specification.
47. ISIRI 1053, Drinking water -Physical and chemical specifications,: Institute of Standards and Industrial Research of Iran, 5threvision.
48. Organization · 2008 · Vol. 1
49. ‘‘Standard specification for portland cement”
50. ‘‘Standard practice for making and curing concrete test specimens in the laboratory‘‘
51. C143–78, “Standard test method for slump of portland cement concrete”
52. S ASTM C138, “Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete”.
53. BS EN 12390-3, “ Testing hardened concrete Part 3: Compressive strength of test specimens”.
54. ASTM C1202-22, “Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration”, West Conshohocken: American Society for Testing and Materials; 2022.
55. BS EN 1338: Concrete paving blocks - Requiretnents and test tnethods, 2003.
56. ASTM C779/C779M-12, “Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces”; 2019.
57. Durability of concrete with electric arc furnace slag aggregate10.1016/j.conbuildmat.2019.05.082 ↗
58. ASTM D559/D559M − 15, Annual Book of ASTM Standards, American Society of Testing Materials"Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures", 2015.
59. ASTM C666/C666M-03, A, “Resistance of Concrete to Rapid Freezing and Thawing”; 2010.
60. ASTMC 597 – 02, Annual Book of ASTM Standards, American Society of Testing Materials, B. Standard Test Method for Pulse Velocity Through Concrete, 2002.
61. Neville · 2010
62. editor Comparison of results of three methods for determining Young’s modulus of elasticity of concrete
63. The setting behavior, mechanical properties and drying shrinkage of ternary blended concrete containing granite quarry dust and processed steel slag aggregate10.1016/j.conbuildmat.2019.04.162 ↗
64. BS EN 206:2013, Concrete - specification, performance, production and conformity (+A1:2016).
65. Ramezanianpour, A. A., Pilvar A., Mahdikhani M., Moodi F. J. C., Materials B. Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength. 2011;25(5):2472-9.10.1016/j.conbuildmat.2010.11.069 ↗
66. Bremner, T. W., Hover K. C., Poston R. W., Broomfield J. P., Joseph T., Price R., et al., editors. Protection of Metals in Concrete Against Corrosion ACI 222 R-01 Reported by ACI Committee 222, 2001.
67. AASHTO T277, “Standard Method of Test for Resistance of Concrete to Chloride Ion Penetration”, American Association of State and Highway Transportation Officials: Washington DC, USA; 2002.
68. BSEN 1340: 2003,“ Concrete kerb units- Requirements and test methods”.
69. ASTM C672/C672M-03, “Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals”,2012.
70. Iranian Concrete Code Volume II Materials and Construction, No.120-2, Last Edition 22/11/2021.
71. Freeze–thaw resistance and transport properties of high-volume fly ash roller compacted concrete designed by maximum density method10.1016/j.cemconcomp.2013.01.009 ↗
72. Neville · 2010