Effect of low-vacuum environment on the strength and permeability of cement-based materials
Source abstract
Abstract
The exposure of cement-based materials to low-vacuum environments will result in fast moisture loss, which will cause phase transformation and pore structure changes, as well as variations in mechanical and permeability performances. In this study, a series of experiments were conducted to investigate the effects of various drying conditions (i.e., standard drying, low-vacuum drying, and oven drying conditions) on the properties of cement-based materials, including paste, mortar, and concrete. The tested properties included the mass loss during the exposure to drying conditions, as well as the compressive strength and permeability after the exposure. Results show that the drying rate of cement-based materials was higher under low-vacuum conditions than oven drying for the first two hours, but slower thereafter. Vacuum drying led to a greater enhancement in compressive strength than oven drying, with the most significant effect identified in cement paste. Additionally, oven drying showed more significant deterioration effects on permeability of cement-based materials compared to vacuum drying. The presence of aggregates in concrete has two contrasting effects on the medium permeability: intricated pathways would decrease permeability, but the microcrack formation at the interface during drying would increase permeability. Conventional two-phase material models based on the results of cement paste permeability tests cannot accurately predict the permeability of mortar or concrete after exposure to drying conditions in this study. The paper is expected to provide a basis for the investigation of the mechanical properties and durability evolution of cement-based materials under a low-vacuum environment.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Effect of atmospheric pressure on air content and air void parameters of concrete10.1680/macr.14.00256 ↗
2. Effect of low air pressure on the durability of concrete10.1016/j.conbuildmat.2018.07.179 ↗
3. Long-term properties of mortar exposed to a vacuum
4. Impact formation of ultralow-binder-content composite “lunar cement”10.1007/s12567-020-00327-3 ↗
5. Manufacture of polymeric concrete on the Moon10.1016/j.actaastro.2015.04.004 ↗
6. Analytical model of fluid flow through closed structures for vacuum tube systems
7. Probabilistic performance assessment of airtightness in concrete tube structures10.1007/s12205-015-0735-z ↗
8. Performance evaluation of airtightness in concrete tube structures for super-speed train systems10.1680/macr.12.00161 ↗
9. Hui · 2008
10. Mechanical properties characteristics of high strength concrete exposed to low vacuum environment
11. Drying shrinkage behavior of cement mortar under low vacuum conditions10.1016/j.conbuildmat.2023.130933 ↗
12. Study on the drying shrinkage deformation of cement mortar under low vacuum condition and its mechanism
13. Surface tension skrinkage and strength of hardened cement paste10.1007/BF02473643 ↗
14. Experimental research on drying control condition with minimal effect on concrete strength10.1016/j.conbuildmat.2016.12.141 ↗
15. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
16. Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry - A comparative study between oven-, vacuum-, and freeze-drying10.1016/S0008-8846(01)00594-4 ↗
17. The influence of different drying methods on cement paste microstructures as reflected by gas adsorption: Comparison between freeze-drying (F-drying), D-drying, P-drying and oven-drying methods10.1016/j.cemconres.2005.11.021 ↗
18. Evaluation of drying methods by nitrogen adsorption10.1016/j.cemconres.2019.02.016 ↗
19. Critical examination of drying damage to cement pastes10.1680/adcr.2000.12.2.79 ↗
20. The influence of water removal techniques on the composition and microstructure of hardened cement pastes10.1016/j.cemconres.2008.02.012 ↗
21. Transport properties of concrete after drying-wetting regimes to elucidate the effects of moisture content, hysteresis and microcracking10.1016/j.cemconres.2017.04.006 ↗
22. Comparative study of carbide slag autoclaved aerated concrete (AAC) manufactured under thermal oven and microwave pre-curing process: Foaming course, rough body strength and physic-mechanical properties10.1016/j.conbuildmat.2019.117550 ↗
23. Oven-drying as a preconditioning method for air permeability test on concrete10.1016/0167-577X(95)00283-9 ↗
24. Evolution of temperature stress and tensile properties of concrete during steam-curing process10.1016/j.conbuildmat.2021.124691 ↗
25. Effect of rubber particles on impact resistance of concrete at a temperature of − 20 ℃10.1007/s43452-021-00257-9 ↗
26. A discussion of the paper “Effect of drying on cement based materials pore structure as identified by mercury intrusion porosimetry - a comparative study between oven, vacuum and freeze drying” by C. Gallé10.1016/S0008-8846(02)00940-7 ↗
27. Application of electrolytic manganese residues in cement products through pozzolanic activity motivation and calcination10.1016/j.jclepro.2022.130629 ↗
28. A new perspective on Belite-ye'elimite-ferrite cement manufactured from electrolytic manganese residue: Production, properties, and environmental analysis10.1016/j.cemconres.2022.107019 ↗
29. ASTM C1585, 2013: Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes, West Conshohocken, Pennsylvania, the United States.
30. ASTM C1202, 2019, Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration, West Conshohocken, Pennsylvania, the United States.
31. Experimental study on concrete strength for different drying conditions
32. Holmes · 2009
33. The Clausius-Clapeyron equation10.1021/ed028p428 ↗
34. Mechanisms of water retention in cement pastes containing a self-curing agent10.1680/macr.1998.50.1.85 ↗
35. Study of water movement in concrete10.1680/macr.2001.53.3.205 ↗
36. Effect of isothermal drying process of cement paste, mortar and concrete on compressive strength
37. Refinements to colloid model of C-S-H in cement: CM-II10.1016/j.cemconres.2007.10.006 ↗
38. Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water/cement ratio and water content10.1016/j.cemconres.2005.11.009 ↗
39. C.L. Hwang, J.F. Young, Drying shrinkage of portland cement pastes I. Microcracking during drying, Cem. Concr. Res. 14(1984) 585-594.10.1016/0008-8846(84)90136-4 ↗
40. Impact resistance of steel fiber-reinforced self-compacting concrete (SCC) at high strain rates
41. Recycled concrete made with different natural coarse aggregates exposed to high temperature10.1016/j.conbuildmat.2008.08.017 ↗
42. Microstructural and bulk property changes in hardened cement paste during the first drying process10.1016/j.cemconres.2014.01.007 ↗
43. Mechanical properties and water absorption of steam-cured mortar containing phase change composites10.1016/j.conbuildmat.2020.118707 ↗
44. Hygric properties of porous building materials (III): Impact factors and data processing methods of the capillary absorption test10.1016/j.buildenv.2018.02.038 ↗
45. ASTM C1794, 2015, Standard test methods for determination of the water absorption coefficient by partial immersion, West Conshohocken, Pennsylvania, the United States.
46. Capillary transport in mortars and concrete10.1016/S0008-8846(97)00052-5 ↗
47. Effect of moisture content of concrete on water uptake10.1016/j.cemconres.2009.09.001 ↗
48. F. Zhu, T. Zhao, P. Wang, Z. Ma, Discussion of the affecting factors on concrete sorption capacity, J. Xi’an Univ. of Arch. & Tech. (Natural Science Edition) 44 (2012) 627-631, 636 (in Chinese).
49. Recyling manganese-rich electrolytic residues: a review10.1007/s10311-023-01595-1 ↗
50. Degradation prediction of recycled aggregate concrete under sulphate wetting–drying cycles using BP neural network10.1016/j.istruc.2022.11.035 ↗
51. Autogenous and total shrinkage of limestone calcined clay cement (LC3) concretes10.1016/j.conbuildmat.2021.125720 ↗
52. A meso-scale numerical method for the simulation of chloride diffusivity in concrete10.1016/j.finel.2014.03.002 ↗
53. Modelling of two-dimensional chloride diffusion concentrations considering the heterogeneity of concrete materials10.1016/j.conbuildmat.2020.118213 ↗
54. Influence of aggregates on chloride ion diffusion coefficient in cement-based composite materials
55. High performance concrete: past, present and future
56. Influence of the interfacial zone on the chloride diffusivity of mortars10.1016/S1065-7355(96)00008-9 ↗
57. BSc, CEng, MICE, The relationship between permeability coefficients for concrete obtained using liquid and gas10.1680/macr.1987.39.138.3 ↗
58. Influence of pore structure and degree of saturation on gas permeability of cement based materials
59. Ba Ant, Modeling chloride penetration in saturated concrete10.1061/(ASCE)0899-1561(1999)11:1(58) ↗
60. Deterioration mechanism of steam-cured concrete subjected to coupled environmental acid and drying action10.1186/s43065-020-00001-2 ↗
61. Mehta · 2014
62. Application of a n-phase model to the diffusion coefficient of chloride in mortar10.1023/B:TIPM.0000021730.34756.40 ↗
63. Damage mechanism and interfacial transition zone characteristics of concrete under sulfate erosion and Dry-Wet cycles10.1016/j.conbuildmat.2020.119340 ↗