journal article·2023-09

Characterization of hygrothermal properties of two wood species- the impact of anisotropy on their thermal and moisture behaviors

Jianhua Zhao, Shuo Feng, Zhenyu Kou, Frank Meissner, Ulrich Ruisinger, John Grunewald

Publisher page

Abstract

Wood is an anisotropic material that has non-identical properties in different structural directions. Due to its particularly biological characteristics, wood is susceptible to moisture degradation. To better understand the hygrothermal performance of wooden products in buildings and reduce moisture-induced deteriorations, a complete hygrothermal measurement of oak and spruce in three structural directions is carried out. The oriented-dependent moisture transport characteristics are acquired from water vapor transmission, drying, and water absorption tests. The anisotropic properties of both wood species are characterized, and their impacts are further investigated by studying the thermal and moisture behaviors of spruce and oak beams embedded in the wall assemblies interiorly insulated by the calcium silicate and mineral wool insulation systems. Hygrothermal simulations performed by the 2D and 3D models with the isotropic property are compared with those of the 3D models with the anisotropic property. The results show that the 3D hygrothermal models with the anisotropic property can properly represent the heat and moisture conditions of wooden beams. The longitudinal property yields a similar hygrothermal performance of the wooden beam to the anisotropic property. For simplification, the longitudinal property can replace the anisotropic property of wood in the 3D model of the wall assemblies to assess the moisture deterioration risk with sufficient accuracy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Wood Treatment and Properties · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Siau · 1984
2. A model of moisture movement in wood based on water potential and the determination of the effective water conductivity10.1007/BF00206228 ↗
3. Equilibrium moisture content and the movement water through wood above fiber saturation10.1007/BF00229342 ↗
4. Moisture content-water potential relationship of red pine sapwood above the fiber saturation point and determination of the effective pore size distribution10.1007/BF00223556 ↗
5. NMR imaging of fluid pathways during drainage of softwood in a pressure membrane chamber10.1016/j.ijmultiphaseflow.2007.10.009 ↗
6. Moisture and bio-deterioration risk of building materials and structures10.1177/1744259109343511 ↗
7. A mathematical model of mould growth on wooden material10.1007/s002260050131 ↗
8. Sedlbauer · 2001
9. Towards modeling of decay risk of wooden materials10.1007/s00107-010-0450-x ↗
10. Determination of the effective water conductivity of red pine sapwood10.1007/s002260000036 ↗
11. Qualitative work to study water movement in wood
12. L. Candanedo, D. Derome, Numerial simulation of water absorption in softwood, Proceedings of the Ninth International IBPSA Conference Montréal, Canada, 2005, pp.123-130.
13. Zillig · 2006
14. Visualization and quantification of liquid water transport in softwood by means of neutron radiography10.1016/j.ijheatmasstransfer.2012.06.045 ↗
15. Moisture performance of interior insulated brick wall segments subjected to wetting and drying-a laboratory investigation10.1016/j.buildenv.2020.107488 ↗
16. Investigation of interior post-insulated masonry walls with wooden beam ends
17. Internal insulation applied in heritage multi-storey building with wooden beams embedded in solid masonry brick facades10.1016/j.buildenv.2016.01.019 ↗
18. Hygrothermal behavior of a massive wall with interior insulation during wetting10.1016/j.buildenv.2015.01.034 ↗
19. Assessment of moisture risk of wooden beam embedded in internally insulated masonry walls with 2D and 3D models
20. Wooden beam ends in combination with interior insulation: an experimental study on the impact of convective moisture transport10.1016/j.buildenv.2018.10.060 ↗
21. SWST, Structure of wood. Society of Wood Science and Technology, Teaching Unit No. 1, available at: http://www.swst.org/teach/set2/struct1.html.
22. Bond · 1995
23. 22007–2 – Plastics – Determination of thermal conductivity and thermal diffusivity – Part 2
24. Thermal conductivity of biobased insulation building materials measured by hot disk: possibilities and recommendation
25. Iso · 2019
26. Iso · 2021
27. Characterization of hygrothermal properties of sandstones - impact of anisotropy on their thermal and moisture behaviors10.1016/j.enbuild.2015.08.033 ↗
28. Iso · 2016
29. Hygric properties of porous building materials (VI): a round robin campaign10.1016/j.buildenv.2020.107242 ↗
30. Drying characteristics of two capillary porous building materials: calcium silicate and ceramic brick10.1016/j.buildenv.2022.109006 ↗
31. Towards an engineering model of material characteristics for input to ham transport simulations - part 1: an approach10.1177/1097196303026004002 ↗
32. Modelling and Implementing efficient Three Dimensional Anisotropic Heat Air and Moisture Transport
33. A. Nicolai, New features and optimizations in the hygrothermal transport model DELPHIN 6, 2017, available at: https://www.bauklimatik-dresden.de/delphin/2nd/doc/Nicolai_DELPHIN6_WhatsNew.pdf.
34. Hygric performance of a massive masonry wall: how do the mortar joints influence the moisture flux?10.1016/j.conbuildmat.2012.12.024 ↗
35. EN 15026, European Committee for Standardization. Hygrothermal performance of building components and building elements - Assessment of moisture transfer by numerical simulation, 2007.
36. Thermal properties of wood: measurements by transient plane source method in dry and wet conditions
37. Thermal properties of wood measured by the hot-disk method: comparison with thermal properties measured by the steady-state method10.1186/s10086-021-01951-1 ↗
38. Thermal conductivity measurements on wood materials with transient plane source technique10.1016/j.tca.2014.11.021 ↗
39. W. Zillig Moisture transport in wood using a multisc ale approach, PhD thesis. 2009, KatholiekeUniversiteitLeuven.
40. Effect of specimen structural orientation on the moisture content-water potential relationship of wood10.1007/BF00202083 ↗
41. The effects of wind-driven rain on the hygrothermal conditions behind wooden beam ends and at the interfaces between internal insulation and existing solid masonry10.1016/j.enbuild.2019.05.020 ↗