journal article·2023-10Open access

On the chemo-mechanical evolution process of high-volume slag cement paste

Minfei Liang, Yu Zhang, Shan He, Yu Chen, Erik Schlangen, Branko Šavija

Abstract

This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano-/micro-indentation techniques. A two-scale micromechanical model was built to predict the effective elastic modulus based on the nanoindentation results. Key findings include: 1) Between 7 and 28 days, the formation of calcium silicate hydrate (C-S-H) gel phase improves the effective elastic modulus by filling capillary pores; 2) From 28 to 90 days, the phase assemblage and microstructure remain stable, with a transition from low-density to high-density C-S-H; 3) Between 90 days and 2 years, slag rims produced by slag grains result in increased elastic modulus; 4) The two-scale micromechanical model, combined with nanoindentation data, accurately predicts the effective modulus of HVSC composites, although the unhydrated slag grains-hydrated cement matrix interface may cause an overestimation at an early age. With longer curing time, this interface disappears owing to the continuous hydration of large slag particles and therefore a good match is found between the modelling and experimental results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Sustainable development and climate change initiatives10.1016/j.cemconres.2007.09.008 ↗
2. Environmental impact analysis of blast furnace slag applied to ordinary Portland cement production10.1016/j.jclepro.2015.12.071 ↗
3. Benefits of slag and fly ash10.1016/0950-0618(95)00014-3 ↗
4. An overview on rheology, mechanical properties and durability of high-volume slag used as a cement replacement in paste, mortar and concrete10.1016/j.conbuildmat.2018.07.150 ↗
5. Y., K.R. and L.H. Yang, Ironmaking, in Treatise on process metallurgy., in: Elsevier, 2014.
6. The hydration of slag, part 2: reaction models for blended cement10.1007/s10853-006-0874-1 ↗
7. Micro-mechanical properties of slag rim formed in cement-slag system evaluated by nanoindentation combined with SEM10.3390/ma15186347 ↗
8. Methods for determination of degree of reaction of slag in blended cement pastes10.1016/j.cemconres.2011.11.010 ↗
9. Nanoscale attraction between calcium-aluminosilicate-hydrate and Mg-Al layered double hydroxides in alkali-activated slag10.1016/j.matchar.2018.03.049 ↗
10. Composition and microstructure of 20-year-old ordinary Portland cement–ground granulated blast-furnace slag blends containing 0 to 100% slag10.1016/j.cemconres.2010.02.012 ↗
11. Spatial zonation of a hydrotalcite-like phase in the inner product of slag: new insights into the hydration mechanism10.1016/j.cemconres.2021.106460 ↗
12. K. Scrivener, R. Snellings, B. Lothenbach, A practical guide to microstructural analysis of cementitious materials, n.d.
13. The chemical composition and microstructure of hydration products in blended cements10.1016/j.cemconcomp.2004.02.036 ↗
14. How to assess the hydration of slag cement concretes?10.1016/j.conbuildmat.2012.09.087 ↗
15. The effect of slag chemistry on the reactivity of synthetic and commercial slags10.1016/j.conbuildmat.2022.127493 ↗
16. Early age hydration of model slag cement: interaction among C3S, gypsum and slag with different Al2O3 contents10.1016/j.cemconres.2022.106954 ↗
17. Effect of slags of different origins and the role of sulfur in slag on the hydration characteristics of cement-slag systems10.1016/j.conbuildmat.2021.125266 ↗
18. The effect of two types of C-S-H on the elasticity of cement-based materials: results from nanoindentation and micromechanical modeling10.1016/S0008-8846(03)00230-8 ↗
19. Investigation on microstructures of cementitious composites incorporating slag10.1680/adcr.13.00029 ↗
20. Fracture simulations of concrete using lattice models: computational aspects10.1016/S0013-7944(97)00010-6 ↗
21. A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials10.1016/S0008-8846(03)00039-5 ↗
22. Nanoindentation-based study of the micro-mechanical properties, structure, and hydration degree of slag-blended cementitious materials10.1007/s10853-015-9650-4 ↗
23. Micromechanical testing and modelling of blast furnace slag cement pastes10.1016/j.conbuildmat.2019.117841 ↗
24. Comparison of methods for arresting hydration of cement10.1016/j.cemconres.2011.06.003 ↗
25. Study on some factors affecting the results in the use of MIP method in concrete research10.1016/S0008-8846(02)00974-2 ↗
26. Surface roughness criteria for cement paste nanoindentation10.1016/j.cemconres.2007.11.014 ↗
27. On the effective load during nanoindentation creep testing with continuous stiffness measurement (CSM)10.1557/s43578-021-00235-0 ↗
28. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
29. A review on the mechanical properties of cement-based materials measured by nanoindentation10.1016/j.conbuildmat.2015.05.008 ↗
30. Critical aspects of nano-indentation technique in application to hardened cement paste10.1016/j.cemconres.2010.09.001 ↗
31. Young’s modulus and creep of calcium-silicate-hydrate compacts measured by microindentation10.1016/j.cemconres.2020.106104 ↗
32. A simple theory of static and dynamic hardness, Proc. R. Soc. Lond. A Math. Phys. Sci. 192 (1948). doi: 10.1098/rspa.1948.0008.10.1098/rspa.1948.0008 ↗
33. Understanding nanoindentation unloading curves10.1557/JMR.2002.0386 ↗
34. G. Constantinides, F.-J. Ulm, The elastic properties of calcium-leached cement pastes and mortars: A multi-scale investigation, n.d.
35. Does microstructure matter for statistical nanoindentation techniques?10.1016/j.cemconcomp.2009.08.007 ↗
36. Statistical nanoindentation technique in application to hardened cement pastes: influences of material microstructure and analysis method10.1016/j.conbuildmat.2016.03.064 ↗
37. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
38. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
39. Effect of individual phases on multiscale modeling mechanical properties of hardened cement paste10.1016/j.conbuildmat.2017.07.074 ↗
40. Micromechanical investigation of Portland cement paste10.1016/j.conbuildmat.2014.08.017 ↗
41. Multiscale modeling elastic properties of cement-based materials considering imperfect interface effect10.1016/j.conbuildmat.2017.07.196 ↗
42. J. Qu, M. Cherkaoui, Fundamentals of Micromechanics of Solidss, 2007. doi: 10.1002/9780470117835.10.1002/9780470117835 ↗
43. J.T. Kloprogge, J. Kristóf, R.L. Frost, Thermogravimetric analysis-mass spectrometry (TGA-MS) of hydrotalcites containing CO32−, NO3−, Cl−, SO42− or ClO4−, in: 2001. A Clay Odyssey, Elsevier, 2003: pp. 451–458. doi: 10.1016/B978-044450945-1/50147-0.10.1016/B978-044450945-1/50147-0 ↗
44. The thermal decomposition of Mg-Al hydrotalcites: effects of interlayer anions and characteristics of the final structure10.1002/1521-3765(20021216)8:24<5571::AID-CHEM5571>3.0.CO;2-R ↗
45. Richardson · Cem. Concr. Res. · 2004 · 34 · 173310.1016/j.cemconres.2004.05.034 ↗
46. Hydration of Portland cement with high replacement by siliceous fly ash10.1016/j.cemconres.2012.06.009 ↗
47. S.M. J.F. Young, Concrete Prentice-Hall, 1981.
48. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes10.1016/S0008-8846(00)00257-X ↗
49. Nanoindentation on micromechanical properties and microstructure of geopolymer with nano-SiO2 and nano-TiO210.1016/j.cemconcomp.2020.103883 ↗
50. Influence of triethanolamine on mechanical strength and hydration performance of blended cement containing fly ash, limestone and slag10.1016/j.jobe.2021.102879 ↗
51. A two-scale method to rapidly characterize the logarithmic basic creep of concrete by coupling microindentation and uniaxial compression creep test10.1016/j.cemconcomp.2021.104274 ↗
52. Creep behavior of C-S-H under different drying relative humidities: interpretation of microindentation tests and sorption measurements by multi-scale analysis10.1016/j.cemconres.2020.106036 ↗
53. Effect of particlesize of blast furnace slag on properties of portland cement10.1016/j.proeng.2011.12.448 ↗
54. Effect of fineness and particle size distribution of granulated blast-furnace slag on the hydraulic reactivity in cement systems10.1680/adcr.2005.17.4.161 ↗
55. Physico-chemical properties of synthetic hydrotalcites in relation to composition10.1346/CCMN.1980.0280107 ↗
56. The role of hydrotalcite-like phase and monosulfate in slag cement paste during atmospheric and accelerated carbonation10.1016/j.cemconcomp.2022.104642 ↗
57. Degrees of reaction of the slag in some blends with Portland cements10.1016/0008-8846(95)00190-5 ↗
58. Selective dissolution of hydrated blast furnace slag cements10.1016/0008-8846(87)90110-4 ↗
59. Nanoscale mechanical properties of concrete containing blast furnace slag and fly ash before and after thermal damage10.1016/j.cemconcomp.2012.09.003 ↗
60. Nanoindentation characteristics of cement with different mineral admixtures10.1007/s11431-013-5186-5 ↗
61. Hydration products at the blastfurnace slag aggregate – cement paste interface10.1016/0008-8846(94)90128-7 ↗
62. The Interfacial Transition Zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗