Interfacial strength characteristics between modified iron tailings and profiled fibers under dry–wet and freeze–thaw environments
Source abstract
Abstract
The interfacial properties of fibers and matrix materials have an important effect on the mechanical properties of fiber-reinforced materials. To study the role of fiber morphology and the environmental effects on the interfacial properties of fibers and matrix materials, the interfacial strength characteristics of undulation polypropylene fiber (UPF) and serrated polypropylene fiber (SPF) with cement-modified iron tailings (CIT) were analyzed through single-fiber pullout tests. The effects of curing age, freeze–thaw cycles, and dry–wet cycles on interfacial strength were analyzed. The energy dissipation during fiber pullout under different environmental conditions was verified, and the microscopic mechanism of interfacial strength change was determined. The results show the following: (1) The interfacial strength of UPF and SPF is positively correlated with curing age, while freeze–thaw and dry–wet cycles can impair their interfacial properties; also, the interfacial strength decreases substantially and tends to flatten out after 3 cycles. (2) The dissipation energy of UPF and SPF increases with curing age, but decreases as the number of dry–wet cycles and freeze–thaw cycles increases. The critical reinforcement length of UPF is better than that of SPF by 363% and 50% under freeze–thaw and dry–wet cycles, respectively. Also, its performance and reinforcement effect in reducing crack development under freeze–thaw and dry–wet environments are better compared to SPF. (3) The interfacial strength of the profiled fibers consists of adhesion and friction. Freeze–thaw cycles cause a significant damage to adhesion and friction, while dry–wet cycles mainly affect adhesion. Interfacial strength is related to the curvature of the fiber and the unconfined compressive strength of CIT, which follows a linear function.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Composite Material Mechanics · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Evaluation of engineering properties and environmental effect of recycled gypsum stabilized soil in geotechnical engineering: a comprehensive review10.1016/j.resconrec.2021.105780 ↗
2. Comprehensive utilization of iron tailings in China
3. Current situation and comprehensive utilization of iron ore tailing resources10.1007/s10913-006-0069-9 ↗
4. An analytical solution to estimate the settlement of tailings or backfill slurry by considering the sedimentation and consolidation10.1016/j.ijmst.2021.02.004 ↗
5. Valorization of mining waste and tailings through paste backfilling solution, Imiter operation, Morocco10.1016/j.ijmst.2016.02.021 ↗
6. Green utilization of modified biomass by-product rice husk ash: A novel eco-friendly binder for stabilizing waste clay as road material10.1016/j.jclepro.2022.134303 ↗
7. Load–settlement behaviour of a strip footing resting on iron ore tailings as a structural fill10.1016/j.ijmst.2015.12.010 ↗
8. Evaluation of iron ore tailings as replacement for fine aggregate in concrete10.1016/j.conbuildmat.2016.05.095 ↗
9. Formation and properties of paraffin wax submicron emulsions prepared by the emulsion inversion point method10.1016/j.colsurfa.2009.12.036 ↗
10. Reuse of waste iron as a partial replacement of sand in concrete10.1016/j.wasman.2007.07.009 ↗
11. Mechanical behaviour of Panzhihua iron tailings10.1139/cgj-2018-0032 ↗
12. A resilience-based approach in managing the closure and abandonment of large mine tailing ponds10.1016/j.ijmst.2020.05.007 ↗
13. Research on the high-temperature resistance of recycled aggregate concrete with irontailing sand
14. Synthesis of magnetite powder from iron ore tailings10.1016/j.powtec.2010.03.005 ↗
15. Utilization of iron tailings to prepare high-surface area mesoporous silica materials
16. Underground void filling by cemented mill tailings10.1016/j.ijmst.2013.11.003 ↗
17. Characteristics of the fired bricks with low-silicon iron tailings10.1016/j.conbuildmat.2014.07.075 ↗
18. Recycling of industrial waste iron tailings in porous bricks with low thermal conductivity10.1016/j.conbuildmat.2019.04.040 ↗
19. The properties and formation mechanisms of eco-friendly brick building materials fabricated from low-silicon iron ore tailings10.1016/j.jclepro.2018.08.309 ↗
20. Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete10.1016/j.conbuildmat.2016.05.020 ↗
21. Durability of concrete incorporated with siliceous iron tailings
22. Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products10.1016/j.jclepro.2016.03.172 ↗
23. Use of iron ore tailings and sediments on pavement structure10.1016/j.conbuildmat.2022.128072 ↗
24. Using Iron Ore Tailings from Tailing Dams as Road Material10.1061/(ASCE)MT.1943-5533.0001613 ↗
25. Cement modification of tropical black clay using iron ore tailings as admixture10.1016/j.trgeo.2015.10.001 ↗
26. A new approach for stabilization of lateritic soil with Portland cement and sand: strength and durability10.1007/s11440-020-01136-y ↗
27. Influences of different modifiers on the disintegration of improved granite residual soil under wet and dry cycles10.1016/j.ijmst.2022.05.003 ↗
28. Mechanical characteristics and water stability of silt solidified by incorporating lime, lime and cement mixture, and SEU-2 binder10.1016/j.conbuildmat.2019.04.103 ↗
29. High-efficiency stabilization of dredged sediment using nano-modified and chemical-activated binary cement10.1016/j.jrmge.2022.12.007 ↗
30. Experimental investigations on the mechanical behavior of iron tailings powder with compound admixture of cement and nano-clay10.1016/j.conbuildmat.2020.119259 ↗
31. Mechanical properties and pore structure of recycled aggregate concrete made with iron ore tailings and polypropylene fibers
32. The elastic modulus and damage stress-strain model of polypropylene fiber and nano clay modified lime treated soil under axial load10.3390/polym14132606 ↗
33. Piezoresistivity enhancement of functional carbon black filled cement-based sensor using polypropylene fibre10.1016/j.powtec.2020.06.029 ↗
34. Investigation of the low-temperature properties and cracking resistance of fiber-reinforced asphalt concrete using the DIC technique10.1016/j.engfracmech.2020.106951 ↗
35. Study on compressive properties and dynamic characteristics of polypropylene-fiber-and-cement-modified iron-ore tailing under traffic load10.3390/polym14101995 ↗
36. Influence of polypropylene fiber and cement addition on strength behavior of clay soil and the mechanisms
37. Experimental study on polypropylene fiber improving soft soils
38. Modelling of fibre–cohesive soil mixtures10.1007/s11440-013-0283-y ↗
39. Experimental study on the interfacial bond strength and energy dissipation capacity of steel and steel fibre reinforced concrete (SSFRC) structures
40. Computational investigation of twisted fiber pullout from ultra-high performance concrete10.1016/j.conbuildmat.2019.06.146 ↗
41. Single fiber pullout tests on interfacial shear strength of wave-shape fiber-reinforced soils
42. Fiber-reinforced concrete: an overview after 30 years of development10.1016/S0958-9465(96)00046-7 ↗
43. Pullout behavior of polypropylene fibers from cementitious matrix10.1016/j.cemconres.2004.02.014 ↗
44. The role of interface strength on the low velocity impact behaviour of PP/glass fibre laminates10.1016/j.compositesb.2014.02.018 ↗
45. Energy dissipation characteristics of all-grade polyethylene fiber-reinforced engineered cementitious composites (PE-ECC)10.1016/j.cemconcomp.2019.103459 ↗
46. Deterioration of concrete under coupled aggressive actions associated with load, temperature and chemical attacks: a comprehensive review10.1016/j.conbuildmat.2022.126466 ↗
47. Investigation into the freeze–thaw durability of semi-flexible pavement mixtures10.1080/14680629.2019.1599995 ↗
48. Flexural behavior evaluation and energy dissipation mechanisms of modified iron tailings powder incorporating cement and fibers subjected to freeze-thaw cycles
49. Effects of freeze-thaw cycles on the unconfined compressive strength of straw fiber-reinforced soil10.1016/j.geotexmem.2020.03.004 ↗
50. Discrete fiber reinforcement efficiency in the mechanical properties and wet-dry performance of fat clay treated with industrial sewage sludge ash
51. Cumulative deformation and damage evolution of fiber cement–modified iron tailings under cyclic load10.1061/IJGNAI.GMENG-8103 ↗
52. JTGE51-2009. Test Methods of Materials Stabilized with Inorganic Binders for Highway Engineering. Bei Jing: China Communications Press, 2009.
53. Performance of cement-stabilized sand subjected to freeze-thaw cycles
54. JTG3430-2020. Test Methods of Soils for Highway Engineering. Bei Jing: China Communications Press, 2020.
55. Effects of freeze-thaw cycles on mechanical properties of polypropylene Fiber and cement stabilized clay10.1016/j.coldregions.2018.07.004 ↗
56. Experimental investigation on bonding property of asphalt-aggregate interface under the actions of salt immersion and freeze-thaw cycles10.1016/j.conbuildmat.2019.02.094 ↗
57. Stabilised expansive soil behaviour during wetting and drying10.1080/10298436.2012.746688 ↗
58. Effect of fiber length and composition on mechanical properties of carbon fiber-reinforced polybenzoxazine10.1002/pat.1056 ↗
59. A novel MAC protocol exploiting concurrent transmissions for massive LoRa connectivity10.1109/JCN.2020.000005 ↗
60. Investigation on direct shear and energy dissipation characteristics of iron tailings powder reinforced by polypropylene fiber10.3390/app9235098 ↗
61. Study on the mechanical properties of fiber-modified iron tailings stabilized by lime and fly ash based on energy analysis
62. Dynamic behavior of fiber-reinforced soil under freeze-thaw cycles10.1016/j.soildyn.2017.07.022 ↗
63. Quantifying dispersion of nanosilica in hardened cement matrix using a novel SEM-EDS and image analysis-based methodology10.1016/j.cemconres.2021.106524 ↗
64. Hydration kinetics and activation energy of cement pastes containing various nanoparticles10.1016/j.compositesb.2021.108836 ↗
65. Shear behavior of ultrafine magnetite tailings subjected to freeze-thaw cycles10.1016/j.ijmst.2019.06.007 ↗
66. Effect of Freezing and Thawing on the Permeability and Structure of Soils10.1016/B978-0-444-41782-4.50012-9 ↗
67. Experimental research on performance of road base with cement stabilized iron tailings sand
68. Effect of Wetting-Drying Cycles on Mechanical Behaviour and Electrical Resistivity of Unsaturated Subgrade Soil10.1155/2019/3465327 ↗
69. Experimental study on strength characteristics of expansive soil improved by steel slag powder and cement under dry-wet cycles10.1007/s40996-020-00473-y ↗
70. Damage of saline intact loess after dry-wet and its interpretation based on SEM and NMR10.1016/j.sandf.2020.06.006 ↗
71. Characteristics of strength and pore distribution of lime-flyash loess under freeze-thaw cycles and dry-wet cycles10.1007/s12517-017-3313-5 ↗