Mechanical behavior of sustainable engineered cementitious composites with construction waste powder as binder and sand replacement
Source abstract
Abstract
The utilization of recycled powder (RP) obtained from construction waste in the development of sustainable engineered cementitious composites (ECC) has significantly improved their sustainability. This study investigated the mechanical strength of sustainable ECC prepared with three different RPs namely recycled brick powder, recycled paste powder, and recycled concrete powder. The results demonstrated that substituting high portion of cement with RP resulted in a loose microstructure in ECC, but the substitution of silica sand with RP led to a denser microstructure in ECC. Replacing 50% cement and 100% fly ash with RP derived from concrete waste led to a marginal decrease of 39.4% and 20.2% in the compressive strength of ECC, but replacing silica sand with such RP slightly increased the strength of ECC. Besides, recycled brick powder blended ECC shows better strength than the recycled concrete powder blended ECC. Under uniaxial tensile load, the incorporation of RP improved the ductility of ECC, regardless of whether it replaced silica sand or binding materials, while simultaneously reducing the ultimate tensile strength of ECC to varying degrees. Specifically, substituting RP from concrete waste for 50% cement, 100% fly ash, and 100% silica sand caused 145.5%, 55.4%, and 43.6% increase in the ultimate tensile strain of blended ECC, respectively. Particularly, the combine substitution of binder and silica sand with RP is feasible in ECC. More sustainable ECC with good mechanical strength and ductility can be achieved by optimizing the content of RP as binder and sand replacement, and the ECC blended with RP shows good environmental and economic benefits.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Steady-state and multiple cracking of short random fiber composites10.1061/(ASCE)0733-9399(1992)118:11(2246) ↗
2. Relationship between microstructure and strain-hardening behaviour of 3D printed engineered cementitious composites10.1016/j.cemconcomp.2022.104677 ↗
3. Development of ultra-high ductility engineered cementitious composites as a novel and resilient fireproof coating10.1016/j.conbuildmat.2021.123090 ↗
4. Mechanical property and durability of engineered cementitious composites (ECC) with nano-material and superabsorbent polymers10.1016/j.powtec.2022.117839 ↗
5. Water permeability of engineered cementitious composites10.1016/j.cemconcomp.2009.07.002 ↗
6. Comparative study on durability properties of engineered cementitious composites with polypropylene fiber and glass fiber
7. Feasibility of low fiber content PVA-ECC for jointless pavement application10.1016/j.conbuildmat.2020.121131 ↗
8. Application of Engineered Cementitious Composites (ECC) in interior beam–column connections for enhanced seismic resistance10.1016/j.engstruct.2014.03.026 ↗
9. Tailoring ECC for special attributes: A review10.1007/s40069-012-0018-8 ↗
10. One-part alkali-activated materials: A review10.1016/j.cemconres.2017.10.001 ↗
11. Strength improvement of strain-hardening cementitious composites with ultrahigh-volume fly ash10.1061/(ASCE)MT.1943-5533.0001987 ↗
12. Feasibility of using ultrahigh-volume limestone-calcined clay blend to develop sustainable medium-strength Engineered Cementitious Composites (ECC)10.1016/j.jclepro.2020.121343 ↗
13. Engineered Cementitious Composites (ECC) with limestone calcined clay cement (LC3)10.1016/j.cemconcomp.2020.103766 ↗
14. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
15. Sustainable high strength, high ductility engineered cementitious composites (ECC) with substitution of cement by rice husk ash10.1016/j.jclepro.2021.128379 ↗
16. Feasibility of structural retrofit concrete pipelines using limestone calcined clay cement Engineered Cementitious Composites (LC3 ECC)10.1016/j.engstruct.2023.116305 ↗
17. Effect of fineness and calcium content of fly ash on the mechanical properties of Engineered Cementitious Composites (ECC)10.1016/j.conbuildmat.2019.03.129 ↗
18. Self-healing ability of fly ash–cement systems10.1016/j.cemconcomp.2008.12.009 ↗
19. Flexural toughness of sustainable ECC with high-volume substitution of cement and silica sand10.1016/j.conbuildmat.2020.121438 ↗
20. Mechanism study of crack propagation in river sand Engineered Cementitious Composites (ECC)10.1016/j.cemconcomp.2022.104434 ↗
21. On rubberized engineered cementitious composites (R-ECC): A review of the constituent material
22. Mechanical and deformation properties of rubberized engineered cementitious composite (ECC)
23. Deformation Properties of Rubberized ECC Incorporating Nano Graphene Using Response Surface Methodology10.3390/ma13122831 ↗
24. Circular economy on construction and demolition waste: A literature review on material recovery and production10.3390/ma13132970 ↗
25. Contributions of the circular economy to the UN sustainable development goals through sustainable construction10.1016/j.resconrec.2021.106023 ↗
26. Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective10.1016/j.jclepro.2018.03.085 ↗
27. Treatments for the improvement of recycled aggregate10.1061/(ASCE)0899-1561(2004)16:6(597) ↗
28. Comparisons of natural and recycled aggregate concretes prepared with the addition of different mineral admixtures10.1016/j.cemconcomp.2011.05.009 ↗
29. The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review10.1016/j.cemconcomp.2020.103807 ↗
30. Mechanical properties of concrete mixed with recycled powder produced from construction and demolition waste10.1016/j.jclepro.2018.03.277 ↗
31. Micro-structural and mechanical properties of ultra-high performance engineered cementitious composites (UHP-ECC) incorporation of recycled fine powder (RFP)10.1016/j.cemconres.2019.105813 ↗
32. Effects of active waste powder obtained from C&D waste on the microproperties and water permeability of concrete10.1016/j.jclepro.2020.120518 ↗
33. Properties of the foam concrete containing waste brick powder derived from construction and demolition waste
34. Chloride permeability of concrete mixed with activity recycled powder obtained from C&D waste10.1016/j.conbuildmat.2018.12.065 ↗
35. Long-term effects of waste brick powder addition in the microstructure and service properties of mortars10.1016/j.conbuildmat.2018.06.161 ↗
36. A novel development of green ultra-high performance concrete (UHPC) based on appropriate application of recycled cementitious material10.1016/j.jclepro.2020.121231 ↗
37. Mechanical behaviour of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2006.12.004 ↗
38. Micro-macro characterizations of mortar containing construction waste fines as replacement of cement and sand: A comparative study10.1016/j.conbuildmat.2023.131328 ↗
39. Using Green Supplementary Materials to Achieve More Ductile ECC10.3390/ma12060858 ↗
40. Upcycling of construction waste powder for sustainable ultra-high performance engineered cementitious composites: Effects of waste powder source and content10.1016/j.conbuildmat.2022.128789 ↗
41. Formulating eco-friendly geopolymer foam concrete by alkali-activation of ground brick waste10.1016/j.jclepro.2021.129180 ↗
42. Application of waste brick powder in alkali activated aluminosilicates: Functional and environmental aspects10.1016/j.jclepro.2018.05.181 ↗
43. Water transport and resistance improvement for the cementitious composites with eco-friendly powder from various concrete wastes10.1016/j.conbuildmat.2021.123247 ↗
44. The utilization of active recycled powder from various construction wastes in preparing ductile fiber-reinforced cementitious composites: A case study
45. Ultra-high performance concrete: From fundamental to applications
46. Utilization of waste concrete powder as a substitution material for cement10.1016/j.conbuildmat.2011.11.042 ↗
47. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
48. Durability study on engineered cementitious composites (ECC) under sulfate and chloride environment10.1016/j.conbuildmat.2016.12.074 ↗
49. Upcycling of waste concrete in eco-friendly strain-hardening cementitious composites: Mixture design, structural performance, and life-cycle assessment10.1016/j.jclepro.2021.129911 ↗
50. Effect of brick dust and lime powder on the performance of plain cement concrete
51. Development of eco-friendly geopolymers with ground mixed recycled aggregates and slag10.1016/j.jclepro.2020.120369 ↗
52. Feasibility of incorporating autoclaved aerated concrete waste for cement replacement in sustainable building materials10.1016/j.jclepro.2019.119455 ↗
53. The particle-size effect of waste clay brick powder on its pozzolanic activity and properties of blended cement10.1016/j.jclepro.2019.118521 ↗
54. Autogenous shrinkage and nano-mechanical properties of UHPC containing waste brick powder derived from construction and demolition waste10.1016/j.conbuildmat.2021.124869 ↗
55. Preparation and characterization of ultra-high-strength and ultra-high-ductility cementitious composites incorporating waste clay brick powder10.1016/j.jclepro.2021.127813 ↗
56. Recycled concrete and brick powders as supplements to Portland cement for more sustainable concrete10.1016/j.jclepro.2022.132651 ↗