journal article·2023-11

Lightweight pumice mortars for repair of historic buildings –Assessment of physical parameters, engineering properties and durability

Zbyšek Pavlík, Martin Vyšvařil, Milena Pavlíková, Patrik Bayer, Adam Pivák, Pavla Rovnaníková, Martina Záleská

Publisher page

Abstract

The subject of the presented research was an experimental analysis of physical, engineering and durability parameters of lightweight mortars intended for the repair of historical buildings. Compatibility criteria, the requirements of technical standards and guidelines, and last but not least, previously published research results dealing with the development of mortars for repair delicate historic structures were taken into account in the design of mortar composition. Crushed pumice of a similar grain size was used to lighten the reference lime-based mortar and natural hydraulic lime mortar with quartz filler. Replacement of quartz sand with pumice was 25, 50, 75 and 100% by volume. The use of pumice allowed the fundamental physical, mechanical, hygric, thermal and durability parameters of the lightweight mortars to be such that they met the standard requirements for repair mortars and the heritage conservation requirements for compatibility with the original materials of historic masonry. The main finding was the fact that by replacing sand with pumice, a significant increase in the porosity of the mortars was achieved, while maintaining sufficient mechanical strength due to the pozzolanic reaction of the pumice. Mortars based on natural hydraulic lime have become more resistant to frost and salt crystallization. The advantage of the developed mortars was their low thermal conductivity and high water vapor permeability, which made them suitable for use on damp masonry, which is a substantial scientific contribution of the manuscript.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Consolidation of renders and plasters10.1617/s11527-016-0894-5 ↗
2. Analysis of ancient mortars and design of compatible repair mortars: The case study of Odeion of the archaeological site of Dion10.1016/j.conbuildmat.2012.09.086 ↗
3. Characterization of repair mortars for the assessment of their compatibility in restoration projects: research and practice10.1016/j.conbuildmat.2011.01.008 ↗
4. Non-hydrophobized perlite renders for repair and thermal insulation purposes: Influence of different binders on their properties and durability10.1016/j.conbuildmat.2020.120617 ↗
5. Valorisation of waste glass powder and brick dust in air-lime mortars for restoration of historical buildings: Case study theatre of Skikda (Northern Algeria)10.1016/j.conbuildmat.2021.125681 ↗
6. Lime render layers: An overview of their properties10.1016/j.culher.2013.07.004 ↗
7. A case study on the restoration of a historical masonry building based on field studies and laboratory analyses10.1080/15583058.2019.1607625 ↗
8. Rehabilitation and restauration of the main façade of historical masonry building – Romanian National Opera Timisoara
9. Compositional and textural characterization of historical bedding mortars from rubble stone masonries: Contribution for the design of compatible repair mortars10.1016/j.conbuildmat.2020.118627 ↗
10. ICOMOS, The Declaration of Amsterdam, 1975. online available at: https://www.icomos.org/en/and/169-the-declaration-of-amsterdam (accessed January 17, 2022).
11. Salt weathering: influence of evaporation rate, supersaturation and crystallization pattern10.1002/(SICI)1096-9837(199903)24:3<191::AID-ESP942>3.0.CO;2-G ↗
12. Selection of plasters and renders for salt laden masonry substrates10.1016/j.conbuildmat.2008.09.013 ↗
13. Influence of paints on drying and salt distribution processes in porous building materials10.1016/j.conbuildmat.2008.08.006 ↗
14. Artificial ageing by salt crystallization: test protocol and salt distribution patterns in lime-based rendering mortars10.1016/j.culher.2020.01.013 ↗
15. Lime and gypsum structural mortars in historical construction
16. Differentiating between anthropogenic calcite in plaster, ash and natural calcite using infrared spectroscopy: implications in archaeology10.1016/j.jas.2007.06.024 ↗
17. Cowan · 1977
18. Lime mortar technology in ancient eastern Roman provinces
19. Cowper · 1998
20. Roman Building Materials and Techniques, Routledge
21. MacDonald · 1965
22. Ward-Perkins · 1981
23. Comparative investigation of mortars from Roman Colosseum and cistern10.1016/j.tca.2005.03.003 ↗
24. Production technology of mortar-based building materials from the Arch of Trajan and the Roman Theatre in Benevento10.1140/epjp/i2018-12229-1 ↗
25. Contribution to the knowledge of ancient Roman seawater concretes: Phlegrean pozzolan adopted in the construction of the harbour at Soli-Pompeiopolis (Mersin, Turkey)
26. Mogetta · 2021
27. Mortar studies towards the replication of Roman concrete10.1111/j.1475-4754.2009.00450.x ↗
28. Nineteenth century hydraulic restoration mortars in the Saint Michael’s Church (Leuven, Belgium): Natural hydraulic lime or cement?10.1016/S0008-8846(00)00499-3 ↗
29. Assessment of phase formation in lime-based mortars with added metakaolin, Portland cement and sepiolite, for grouting of historic masonry10.1016/j.cemconres.2009.08.028 ↗
30. Feilden · 2003
31. Rheological behaviour of hydraulic lime-based mortars10.1016/j.jeurceramsoc.2006.04.155 ↗
32. Some considerations about the use of lime-cement mortars for building conservation purposes in Portugal: a reprehensible option or a lesser evil?10.1016/j.conbuildmat.2011.12.003 ↗
33. Strength development and lime reaction in mortars for repairing historic masonries10.1016/j.cemconcomp.2004.02.017 ↗
34. Masonry repair lime-based mortars: factors affecting the mechanical behaviour10.1016/S0008-8846(03)00210-2 ↗
35. Pore structure in mortars applied on restoration: effects on properties relevant to decay of granite buildings10.1016/S0008-8846(02)00887-6 ↗
36. RILEM TC 203-RHM: Repair mortars for historic masonry10.1617/s11527-012-9847-9 ↗
37. Assessment of compatibility between historic mortars and lime-metakaolin restoration mortars made from amazon industrial waste10.1016/j.clay.2020.105843 ↗
38. Improving lime-based rendering mortars with admixtures10.1016/j.conbuildmat.2020.121887 ↗
39. Ternary blended binder for production of a novel type of lightweight repair mortar10.3390/ma12060996 ↗
40. Current mortars in conservation: An overview
41. Composition and compatibility requirements of mineral repair mortars for stone-A review10.1016/j.conbuildmat.2014.02.020 ↗
42. Properties of lime-metakolin mortars for the restoration of historic masonries10.1016/j.clay.2011.04.005 ↗
43. Characterization and compatibility assessment of commercial stone repair mortars10.1016/j.culher.2021.02.001 ↗
44. Renovation mortar systems, International Association for Science and Technology of Building Maintenance and Monuments Preservation WTA, Recommendation 2-9-03.2020/E, WTA Publications: Karlsruhe, Germany, 2020.
45. EN 998-1, Specification for Mortar for Masonry—Part 1: Rendering and Plastering Mortar, European Committee for Standardization (CEN): Brussels, Belgium, 2016.
46. Lightweight thermal efficient repair mortars with expanded glass (EG) for repairing historical buildings: The effect of binder type and EG aggregate dosage on their performance10.1016/j.enbuild.2022.112526 ↗
47. Effects of natural zeolite addition on the properties of lime putty-based rendering mortars10.1016/j.conbuildmat.2020.121363 ↗
48. The use of zeolite, lightweight aggregate and boiler slag in restoration renders10.1016/j.conbuildmat.2017.03.079 ↗
49. Mechanical and durability properties of concretes incorporating natural zeolite10.1016/j.acme.2016.03.013 ↗
50. Suitability of mortars produced using laterite and ceramic wastes: mechanical and microscale analysis10.1016/j.conbuildmat.2017.05.031 ↗
51. Production of lightweight mortar using recycled waste papers and pulverized ceramics: Mechanical and microscale properties
52. Natural hydraulic lime mortars – The effect of ceramic residues on physical and mechanical behaviour
53. Role of lightweight fillers on the properties of a mixed-binder mortar10.1016/j.cemconcomp.2009.07.003 ↗
54. Expanded perlite aggregate characterization for use as a lightweight
55. Coating mortars with improved physical properties, ecnomic cost, and carbon footprint
56. The comparison of thermal insulation types of plaster with cement plaster10.1016/j.jclepro.2014.07.042 ↗
57. Chapter 1.7 - Insulating plasters and their use as internal insulation
58. Properties of hydrophobised lightweight mortars with expanded cork10.1016/j.conbuildmat.2017.08.052 ↗
59. The mechanical, transport and thermal properties of mortar and concrete containing waste cork10.1016/j.cemconcomp.2012.06.003 ↗
60. Use of polycarbonate waste as aggregate in recycled gypsum plasters10.3390/ma13143042 ↗
61. Dissolved recycled expanded polystyrene as partial replacement in plaster composites
62. Lightweight plaster materials with enhanced thermal properties made with polyurethane foam wastes10.1016/j.conbuildmat.2011.10.055 ↗
63. Turning waste expanded polystyrene into lightweight aggregate: Towards sustainable construction industry10.1016/j.scitotenv.2022.155852 ↗
64. EN 459-1, Building lime – Part 1: Definitions, specifications and conformity criteria; European Committee for Standardization (CEN): Brussels, Belgium, 2015.
65. ASTM C 618-17a, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete; ASTM International: West Conshohocken, PA, USA, 2010.
66. NF P 18-513, Pozzolanic Addition for Concrete-Metakaolin: Definitions, Specifications and Conformity Criteria, Annex A; Association Francaise de Normalisation: Paris, France, 2009.
67. Effect of Aggregate and Binder Type on the Functional and Durability Parameters of Lightweight Repair Mortars10.3390/su132111780 ↗
68. Brocklebank · 2012
69. The myth in the mix – the 1:3 ratio of lime to sand, Journal of the Building Limes
70. Copsey · 2019
71. Lime Mortars for Brickwork: Traditional Practice and Modern Misconceptions—Part One
72. EN 1015-3, Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by Flow Table); European Committee for Standardization (CEN): Brussels, Belgium, 1999.
73. EN 1015-6, Methods of test for mortar for masonry – Part 6: Determination of bulk density of fresh mortar; European Committee for Standardization (CEN): Brussels, Belgium, 1998.
74. EN 459-2, Building Lime – Part 2: Test methods; European Committee for Standardization (CEN): Brussels, Belgium, 2021.
75. EN 1015-7, Methods of test for mortar for masonry – Part 7: Determination of air content of fresh mortar; European Committee for Standardization (CEN): Brussels, Belgium, 1998.
76. EN 1015-10, Methods of Test for Mortar for Masonry–Part 10: Determination of Dry Bulk Density of Hardened Mortar; European Committee for Standardization (CEN): Brussels, Belgium, 1999.
77. EN 1015-11, Methods of test for mortar for masonry – Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar, European Committee for Standardization (CEN): Brussels, Belgium 1999.
78. EN 13755, Natural stone test methods. Determination of water absorption at atmospheric pressure; European Committee for Standardization (CEN): Brussels, Belgium, 2008.
79. EN 12371, Natural stone test methods – Determination of frost resistance; European Committee for Standardization (CEN): Brussels, Belgium, 2010.
80. EN 1015-18, Methods of Test for Mortar for Masonry–Part 18: Determination of Water Absorption Coefficient Due to Capillarity Action of Hardened Mortar, European Committee for Standardization (CEN): Brussels, Belgium, 2002.
81. EN ISO 12572, Hygrothermal Performance of Building Materials and Products -Determination of Water Vapour Transmission Properties, International Organization for Standardization (ISO), Geneva, Switzerland, 2016.
82. EN ISO 12571, Hygrothermal performance of building materials and products – Determination of hygroscopic sorption properties, International Organization for Standardization (ISO), Geneva, Switzerland, 2013.
83. Transient plane source (TPS) technique for measuring thermal transport properties of building materials10.1002/fam.810190107 ↗
84. Chloride binding in building materials10.1177/1744259106060138 ↗
85. Hygric properties of porous building materials (VI): A round robin campaign10.1016/j.buildenv.2020.107242 ↗
86. Moisture Diffusivity of Building Materials from Water Absorption Measurements10.1177/109719639902200409 ↗
87. Mortars with crushed lava granulate for repair of damp historical buildings10.3390/ma12213557 ↗
88. Stress from crystallization of salt10.1016/j.cemconres.2003.12.034 ↗
89. Relationship between pore structure and permeability of hardened cement mortars: on the choice of effective pore structure parameter10.1016/S0008-8846(97)00111-7 ↗
90. Introduction to requirements for and functions and properties of repair mortars10.1007/BF02479291 ↗
91. Analytical characterization of ancient mortars from the archaeological roman site of Pisȏes (Beja, Portugal)10.1016/j.conbuildmat.2019.01.233 ↗
92. Microscopy of historic mortars–a review10.1016/j.cemconres.2005.12.006 ↗
93. Design and behavior of traditional lime based plasters and renders, Review and critical appraisal of strengths and weaknesses10.1016/j.cemconcomp.2018.03.005 ↗
94. Natural hydraulic lime versus cement for blended lime mortars for restoration works10.1016/j.conbuildmat.2015.06.058 ↗
95. The longevity of old mortars10.1007/s00339-006-3523-2 ↗
96. Fibre-reinforced lime-based mortars: A possible resource for ancient masonry restoration10.1016/j.conbuildmat.2012.09.050 ↗
97. Investigations on alternate lime-pozzolana based mortars for repair of heritage structures
98. Environmentally-friendly bedding mortars for repair of historical buildings10.1016/j.conbuildmat.2012.04.131 ↗
99. Comparative analysis of the dynamic vapor sorption (DVS) technique and the traditional method for sorption isotherms determination—Exemplified at autoclaved aerated concrete samples of four density classes10.1016/j.cemconres.2016.11.001 ↗
100. Water vapor adsorption in porous building materials: Experimental measurement and theoretical analysis10.1007/s11242-011-9884-9 ↗