Sustainable use of End-of-Life-Tires (ELTs) in a vibration isolation system
Source abstract
Abstract
Huge stockpiles of End-of-Life Tires (ELTs) are of major global concern. This paper investigates and helps to demonstrate the beneficial utilization of ELTs to provide geotechnical seismic isolation (GSI) of machine foundations located on a rubber-soil mixture (RSM). A series of laboratory tests is conducted to extend the understanding of RSM behavior beyond that previously elaborated, particularly by demonstrating the efficiency of the GSI-RSM system and by defining its optimal parametric values. The results indicate that increasing the thickness of the RSM layer and soil cap, along with the addition of rubber content, up to the optimum values lead to enhanced performance. Beyond these optimum values, the benefits start to decrease. For the determined optimum rubber content (8%), RSM layer thickness (0.1 B), and soil cap thickness (0.15 B) at a vibration moment level of 0.17 N.m, the GSI-RSM system achieves maximum reductions of 36%, 43%, and 77% in resonant frequency, resonant displacement, and resonant acceleration, respectively, compared to untreated beds. Moreover, the GSI-RSM system effectively reduces the developed peak particle velocity (PPV) and kinetic energy, independent of the excitation frequency. The increased damping and significant energy dissipation demonstrates the system’s effectiveness in mitigating vibrations. This environmentally-friendly technique presents a low-cost alternative for improving the vibration behavior of soil beds. It provides the basis for the wider adoption of ELTs for GSI, for machine foundations and for other infrastructure projects with similar soil vibration concerns, including building foundations, transportation infrastructure and industrial facilities. In this way the research contributes to the growing body of sustainable practices in the construction industry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Geotechnical Engineering and Underground Structures · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Tire derived aggregate for retaining wall backfill under earthquake loading10.1016/j.conbuildmat.2014.01.091 ↗
2. Analysis of bored pile subjected to machine vibration: an insight into the influence of the soil-pile interface coefficient10.1007/s40515-022-00247-1 ↗
3. Vibration response of machine foundations protected by use of adjacent multi-layer geocells10.1016/j.geotexmem.2023.03.001 ↗
4. Machine foundation response subjected to vertical vibration: experimental and analytical using cone model
5. Undrained cyclic responses of granulated rubber-sand mixtures10.1016/j.sandf.2020.06.007 ↗
6. Dynamic behavior of sand/rubber mixtures
7. Use of rubberised backfills for improving the seismic response of integral abutment bridges10.1007/s10518-016-0018-1 ↗
8. ASTM-D422, 2017. Standard Test Method for Particle-Size Analysis of Soils. ASTM International, West Conshohocken, PA, USA. ASTM-D422. https://doi.org/10.1520/D0422-63R98.10.1520/D0422-63R98 ↗
9. ASTM-D854, 2016. Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. ASTM International, West Conshohocken, PA, USA. ASTM D854-14. https://doi.org/10.1520/D0854-14.10.1520/D0854-14 ↗
10. ASTM-D1557, 2021. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort. ASTM International, West Conshohocken, PA, USA. ASTM-D1557. https://doi.org/10.1520/D1557-12R21.10.1520/D1557-12R21 ↗
11. ASTM-D2487, 2020. Standard practice for classification of soils for engineering purposes (Unified Soil Classification System). ASTM International, West Conshohocken, PA, USA. ASTM-D2487. https://doi.org/10.1520/D2487-17E01.10.1520/D2487-17E01 ↗
12. ASTM-D2940, 2020. Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports. ASTM International, West Conshohocken, PA, USA. ASTM-D2940. https://doi.org/10.1520/D2940_D2940M-15.10.1520/D2940_D2940M-15 ↗
13. Baidya, D., Muralikrishna, G.,2001. Natural frequency of vibrating foundations on layered soil system-an experimental investigation. International conferences on recent advances in geotechnical earthquake engineering and soil dynamics, University of Missouri, Rolla, Missouri University of Science and Technology.2. https://scholarsmine.mst.edu/icrageesd/04icrageesd/session02/2/.
14. Laboratory study on the compressibility of sand–rubber mixtures under one dimensional consolidation loading conditions10.1007/s10035-018-0860-8 ↗
15. Rubber-soil mixtures: use of grading entropy theory to evaluate stiffness and liquefaction susceptibility10.1007/s10518-023-01673-3 ↗
16. Boussinesq, J., 1885. Application des potentiels à l'étude de l'équilibre et du mouvement des solides élastiques.Gauthier-Villars, Imprimeur-Libraire.
17. Evaluation of the effects of textile fibre derived from end-of-life tyres (TFELT) on the rheological behaviour of asphalt binders10.1016/j.conbuildmat.2022.129583 ↗
18. The effect of resin uptake on the flexural properties of compression molded sandwich composites10.1002/we.2661 ↗
19. Nanoindentation measurement of core–skin interphase viscoelastic properties in a sandwich glass composite10.1007/s11043-020-09448-y ↗
20. CATRA, 2019. Canadian Association of Tire Recycling Agencies. CATRA Annual Report, Canada.
21. End-of-life tire management: a critical review10.1007/s11356-021-16263-6 ↗
22. A reinterpretation of the mechanical behavior of rubber-sand mixtures in direct shear testing10.1016/j.conbuildmat.2022.129771 ↗
23. Das, B.M., Luo, Z., 2016. Principles of soil dynamics.Cengage Learning. 1305856708.
24. Response of low-rise building with geotechnical seismic isolation system10.1016/j.soildyn.2020.106187 ↗
25. Investigation of Geotechnical Seismic Isolation Bed in Horizontal Vibration Mitigation10.1061/(ASCE)GT.1943-5606.0002917 ↗
26. Shaking table experiments on framed structure resting on geogrid reinforced geotechnical seismic isolation system10.1007/s10518-023-01687-x ↗
27. DIN4150-3, 1999. German standard: Building and Civil Engineering Standards Committee. Structural Vibration Part 3: Effects of vibration on structures, DIN Germany Institute, Germany.
28. Experimental investigation on static and dynamic characteristics of granulated rubber-sand mixtures as a new railway subgrade filler10.1016/j.conbuildmat.2020.121955 ↗
29. Stability and settlement analysis of a lightweight embankment filled with waste tyre bales over soft ground10.1007/s40515-021-00184-5 ↗
30. Edil, T.B., 2007. A review of environmental impacts and environmental applications of shredded scrap tires. Scrap Tire Derived Geomaterials—Opportunities and Challenges; Hazarika, H., Yasuhara, K., Eds 3-18.
31. Triaxial compression behavior of sand and tire wastes using neural networks10.1007/s00521-010-0430-4 ↗
32. Ehsani, M., Shariatmadari, N., Mir Mohammad hosseini, S.M., 2015. Shear modulus and damping ratio of sand-granulated rubber mixtures. Journal of central south university 22 3159-3167. https://doi.org/10.1007/s11771-015-2853-7.10.1007/s11771-015-2853-7 ↗
33. ETRMA, 2019. European tyre & rubber manufacturers' association. Annual Report, Moving Innovation that Cares. ETRMA, Brussels, Belgium.
34. Analysis of machine foundation vibrations: state of the art10.1016/0261-7277(83)90025-6 ↗
35. Use of waste tire-chips in shallow footings subjected to eccentric loading-an experimental study10.1016/j.conbuildmat.2018.12.024 ↗
36. Performance evaluation of waste tires in protecting embankment against earthquake loading10.1007/s10518-023-01690-2 ↗
37. Assessing the environmental impact of shredded tires as embankment fill material10.1139/cgj-2013-0194 ↗
38. IS-5249, 1992. Indian Standard Code: Determination of dynamic properties of soil-method of test, Prabhat Offset Press, Delhi, India.
39. JATMA, 2018. Tyre Industry of Japan. JATMA, Tokyo, Japan.
40. Field Testing on active isolation of vibrating foundations in Middle-frequency range10.1016/j.conbuildmat.2023.130893 ↗
41. Evaluation of the dynamic responses of high rise buildings with respect to the direct methods for soil-foundation-structure interaction effects and comparison with the approximate methods
42. Seismic evaluation of soil-foundation-structure interaction: Direct and Cone model10.12989/eas.2017.12.2.251 ↗
43. Size effects footing on the seismic performance of the mid-rise building. Sharif
44. Sand–rubber mixtures (large rubber chips)10.1139/T08-070 ↗
45. Dynamic response of a machine foundation in combination with spring mounting base and rubber pad10.1007/s10706-008-9239-7 ↗
46. Properties of chipped rubber roofing membrane and sand mixtures for civil engineering applications10.1016/j.jobe.2016.05.008 ↗
47. Recent advances for flame retardant rubber composites: Mini-review10.1016/j.aiepr.2022.12.002 ↗
48. Dynamic behavior and liquefaction analysis of recycled-rubber sand mixtures10.1061/(ASCE)MT.1943-5533.0001629 ↗
49. Evaluation of engineering properties and environmental effect of recycled waste tire-sand/soil in geotechnical engineering: A compressive review10.1016/j.rser.2020.109831 ↗
50. Rubber friction: comparison of theory with experiment10.1140/epje/i2011-11129-1 ↗
51. Dynamic response of the foundations resting on a two-layered soil underlain by a rigid layer10.1007/s10706-012-9497-2 ↗
52. Shear strength characteristics of geosynthetic reinforced rubber-sand mixtures10.1016/j.geotexmem.2020.12.015 ↗
53. Shear strength and dilatancy behaviour of sand–tyre chip mixtures10.1016/j.sandf.2015.04.004 ↗
54. Cyclic loading response of footing on multi-layered rubber-soil mixtures
55. Experimental and numerical investigation of footing behaviour on multi-layered rubber-reinforced soil10.1080/19648189.2016.1262288 ↗
56. Repeated loading of soil containing granulated rubber and multiple geocell layers10.1016/j.geotexmem.2013.12.003 ↗
57. Bearing capacity of a square model footing on sand reinforced with shredded tire–An experimental investigation10.1016/j.conbuildmat.2012.04.092 ↗
58. A new look at rubber recycling and recreational surfaces: The inorganic and OPE chemistry of vulcanised elastomers used in playgrounds and sports facilities10.1016/j.scitotenv.2023.161648 ↗
59. Dynamic characterization of tire derived aggregates using cyclic simple shear and bender element tests10.1016/j.soildyn.2022.107700 ↗
60. Performance evaluation of vibration-sensitive equipment foundations under ground-transmitted excitation10.1139/t03-014 ↗
61. Newmark, N.M., 1935. Simplified computation of vertical pressures in elastic foundations. Engineering Experiment Station. Circular; no. 024. Univ. Illinois Eng’g Exp’t Station, September 19pp.
62. Properties and durability of concrete containing polymeric wastes (tyre rubber and polyethylene terephthalate bottles): An overview10.1016/j.conbuildmat.2011.11.047 ↗
63. Micromechanical analyses of the effect of rubber size and content on sand-rubber mixtures at the critical state10.1016/j.geotexmem.2016.11.005 ↗
64. Dynamic behaviour of granular soil materials mixed with granulated rubber: Effect of rubber content and granularity on the small-strain shear modulus and damping ratio
65. A numerical investigation on the seismic isolation potential of rubber/soil mixtures10.1007/s11803-020-0589-3 ↗
66. Large-scale field testing of geotechnical seismic isolation of structures using gravel-rubber mixtures10.1002/eqe.3468 ↗
67. Numerical investigation of the seismic response of RC buildings on soil replaced with rubber–sand mixtures10.1016/j.soildyn.2015.09.018 ↗
68. Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review10.1016/j.conbuildmat.2013.09.007 ↗
69. Novel uses of recycled rubber in civil applications10.1016/j.aiepr.2022.08.005 ↗
70. Cyclic and dynamic behavior of sand–rubber and clay–rubber mixtures10.1007/s10706-021-01704-3 ↗
71. Dynamic behavior of sand-rubber mixtures based on hollow cylinder tests10.1016/j.conbuildmat.2020.118948 ↗
72. Dynamic properties of dry sand/rubber (SRM) and gravel/rubber (GRM) mixtures in a wide range of shearing strain amplitudes10.1016/j.soildyn.2011.10.003 ↗
73. Vibration isolation of buildings housed with sensitive equipment using open trenches–case study and numerical simulations10.1016/j.soildyn.2018.08.033 ↗
74. SN-640-312a, 1978. Swiss Standard: effects of vibration of construction. Swiss Association of Standarization, Zurich.
75. Experimental and numerical investigations on attenuation response of machine foundations under vertical excitation10.1080/17486025.2021.1980231 ↗
76. Experimental investigation of the mechanical behaviour of gravel-granulated tyre rubber mixtures10.1016/j.conbuildmat.2020.121749 ↗
77. A comprehensive review on treatment methods for end-of-life tire rubber used for rubberized cementitious materials10.1016/j.conbuildmat.2022.129365 ↗
78. Truong, H.V.P., 2011. Natural Frequencies of Soil-Foundation Systems and Soil Layers. 12th Conference on Science and Technology, University of Technology in Saigon, Vietnam National University, Vietnam. Paper No. D08, 8 pp.
79. Mechanism of geotechnical seismic isolation system: Analytical modeling10.1016/j.soildyn.2019.03.037 ↗
80. Serviceability performance of buildings founded on rubber–soil mixtures for geotechnical seismic isolation10.1080/13287982.2023.2230063 ↗
81. Seismic isolation by rubber–soil mixtures for developing countries10.1002/eqe.756 ↗
82. Preface for the special issue on geotechnical seismic isolation (GSI)10.1007/s10518-023-01694-y ↗
83. Performance of geotechnical seismic isolation system using rubber-soil mixtures in centrifuge testing10.1002/eqe.3398 ↗
84. A sand-rubber deformable granular layer as a low-cost seismic isolation strategy in developing countries: Experimental investigation10.1016/j.soildyn.2019.105731 ↗
85. USTMA, 2017. U.S. scrap tire management summary. U.S. Tire Manufacturers Association, Washington, DC, USA.
86. Field testing of gravel-rubber mixtures as geotechnical seismic isolation10.1007/s10518-022-01541-6 ↗
87. Wang, X., Xu, T., de Andrade, M.J., Rampalli, I., Cao, D., Haque, M., Roy, S., Baughman, R.H., Lu, H., 2021. The interfacial shear strength of carbon nanotube sheet modified carbon fiber composites. Challenges in Mechanics of Time Dependent Materials, Volume 2: Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics, Springer. 25-32. https://doi.org/10.1007/978-3-030-59542-5_4.10.1007/978-3-030-59542-5_4 ↗
88. Experimental study on dynamic properties of sand-rubber mixtures in a small range of shearing strain amplitudes10.21595/jve.2017.18279 ↗
89. WBCSD, 2019. World Business Council for Sustainable Development. Managing End-of-Life Tires (ELTs). Citeseer, Geneva, Switzerland.
90. Seismic isolation effect of rubber-sand mixture cushion under different site classes based on a simplified analysis model10.1016/j.soildyn.2022.107738 ↗
91. Experimental study and molecular simulation on regeneration feasibility of high-content waste tire crumb rubber modified asphalt10.1016/j.conbuildmat.2023.130570 ↗
92. Geotechnical seismic isolation system based on rubber-sand mixtures for rural residence buildings: shaking table test10.3390/ma15217724 ↗
93. Geotechnical performance of waste tires for soil reinforcement from chamber tests10.1016/j.geotexmem.2006.10.004 ↗
94. Influence of rubber sheet on dynamic response of machine foundations