Destructive and non-destructive testing of potential lunar polymer concrete for future lunar habitable infrastructure
Source abstract
Abstract
The data gathered from the Apollo missions has provided humanity with incredible amounts of new insight into the lunar environmental conditions that were unknown prior to the on-site exploration. Even with the extensive amounts of data obtained from those missions, there still exists a significant knowledge gap that requires additional instrumentation to be sent to the lunar surface. The knowledge gap is also associated with the future construction material to be used for the lunar infrastructure. Even though numerous research studies are recommending a variety of lunar habitat designs, not a lot of attention was given to the material properties to be used for the construction. Nine categories of potential materials for lunar infrastructure were identified in this research, with polymer concrete presenting the most feasible approach for the initial infrastructure. Destructive and non-destructive tests were done on different percentages of binder material to obtain the initial material properties that include compressive strength, tensile strength, and Young’s modulus of elasticity for compression and tension. The destructive testing included compressive testing of cubes and tensile testing of dog bones. The non-destructive testing used the cross-correlation method to estimate the longitudinal and shear travel time, and together with ultrasonic tests, Young’s modulus was estimated for both compressive and tensile stresses. The 18% content of the binder material has shown the most promising results, having the highest compressive strength. The 24% content of the binder material has shown the highest tensile strength but indicated brittle behavior that would not be convenient for the lunar infrastructure. Additionally, non-destructive test results have shown an excellent correlation with the destructive test results, indicating feasibility for future material quality inspection and evaluation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Planetary Science and Exploration · Smart Materials for Construction · Advanced Energy Technologies and Civil Engineering Innovations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. S. Matsumoto et al., “Concrete structure construction on the Moon,” lbsa, vol. 2, pp. 493–496, 1992, Accessed: Feb. 14, 2022. [Online]. Available: https://ui.adsabs.harvard.edu/abs/1992lbsa.conf..493M/abstract.
2. Y. Melodie et al., “Project Olympus: Off-World Additive Construction forLunar Surface Infrastructure,” in 50th International Conference on Environmental Systems, 2021, p. 19.
3. Concrete lunar base investigation
4. Deployable structures for a human lunar base10.1016/j.actaastro.2007.01.055 ↗
5. N. Caluk and A. Azizinamini, “A summary of technical requirements, environmental factors and loading for lunar infrastructure,” in Earth and Space 2022: The 18th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, 2022.10.1061/9780784484470.061 ↗
6. Introduction to the concept of modular blocks for lunar infrastructure10.1016/j.actaastro.2023.03.004 ↗
7. Lunar soils, simulants and lunar construction materials: An overview10.1016/j.asr.2022.05.017 ↗
8. C. C. Allen, “Bricks and ceramics,” in Using in situ resources for construction of planetary outposts, 1998, p. 1. Accessed: Mar. 16, 2023. [Online]. Available: https://ui.adsabs.harvard.edu/abs/1998uisr.work....1A/abstract.
9. Structural requirements for the construction of shelters on planetary surfaces
10. A. B. Binder, M. A. Culp, and L. D. Toups, “Lunar derived construction materials: Cast basalt,” in Engineering, construction, and operations in space II, 1990, pp. 117–122.
11. Sintered or melted regolith for lunar construction: state-of-the-art review and future research directions10.1016/j.conbuildmat.2021.123627 ↗
12. Solar 3D printing of lunar regolith10.1016/j.actaastro.2018.06.063 ↗
13. T. Nakamura and B. K. Smith, “Solar thermal system for lunar ISRU applications: development and field operation at Mauna Kea, HI,” in Nonimaging Optics: Efficient Design for Illumination and Solar Concentration VIII, Sep. 2011, vol. 8124, p. 81240B. doi: 10.1117/12.892810.10.1117/12.892810 ↗
14. R. A. Wright, F. H. Cocks, D. T. Vaniman, R. D. Blake, and T. T. Meek, “Fusing lunar materials with microwave energy. Part I: studies of doping media,” in Proceedings of the Lunar and Planetary Science Conference XVII, 1986, pp. 958–959. Accessed: Mar. 17, 2023. [Online]. Available: https://ui.adsabs.harvard.edu/abs/1986LPI....17..958W/abstract.
15. P. Land, “Lunar Base Design,” in Lunar Bases and Space Activities of the 21st Century, 1985, vol. 4, no. 3, p. 363. Accessed: Jan. 12, 2022. [Online]. Available: https://ui.adsabs.harvard.edu/abs/1985lbsa.conf.363L/abstract.
16. J. M. Osio-Norgaard and C. C. Ferraro, “Permeability of Sulfur Based Lunar Concrete,” in Earth and Space 2016: Engineering for Extreme Environments - Proceedings of the 15th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, 2016, pp. 909–914. doi: 10.1061/9780784479971.085.10.1061/9780784479971.085 ↗
17. Sulfur ‘concrete’ for lunar applications - Sublimation concerns10.1016/j.asr.2007.08.018 ↗
18. B. W. Jung, W. C. McBee, K. L. Rasmussen, and T. A. Sullivan, “Fiber Reinforcement of Sulfur Concrete To Enhance Flexural Properties,” 1985.
19. Lunar shelter construction issues: The state-of-the-art towards 3D printing technologies10.1016/j.actaastro.2022.03.033 ↗
20. B. Garnock and L. Bernold, “Experimental study of hollow-core beams made with waterless concrete,” in Earth and Space 2012 - Proceedings of the 13th ASCE Aerospace Division Conference and the 5th NASA/ASCE Workshop on Granular Materials in Space Exploration, 2012, pp. 119–127. doi: 10.1061/9780784412190.014.10.1061/9780784412190.014 ↗
21. A Review on Epoxy and Polyester Based Polymer Concrete and Exploration of Polyfurfuryl Alcohol as Polymer Concrete10.1155/2016/7249743 ↗
22. Mechanical Properties of Polymer Concrete10.1155/2013/948745 ↗
23. Manufacture of polymeric concrete on the Moon10.1016/j.actaastro.2015.04.004 ↗
24. Investigation of severe lunar environmental conditions on the physical and mechanical properties of lunar regolith geopolymers10.1016/j.jmrt.2021.01.124 ↗
25. Geopolymer-based composites
26. Preparation of lunar regolith based geopolymer cement under heat and vacuum10.1016/j.asr.2017.01.024 ↗
27. Evaluation of lunar regolith geopolymer binder as a radioactive shielding material for space exploration applications10.1016/j.asr.2015.05.044 ↗
28. B. Han, S. Ding, and X. Yu, “Intrinsic self-sensing concrete and structures: A review,” Measurement: Journal of the International Measurement Confederation, vol. 59. Elsevier, pp. 110–128, Jan. 01, 2015. doi: 10.1016/j.measurement.2014.09.048.10.1016/j.measurement.2014.09.048 ↗
29. Properties of cement mortar by use of hot-melt polyamides as substitute for fine aggregate10.3390/ma8063714 ↗
30. Cracks, microcracks and fracture in polymer structures: Formation, detection, autonomic repair10.1016/j.pmatsci.2016.07.007 ↗
31. Measurement of the transmitted and reflected capture gamma rays for heat resistant concrete shield10.1007/BF03156043 ↗
32. Radiation shielding properties of mortars with minerals and ores additives10.1016/j.cemconcomp.2019.01.006 ↗
33. Magnetite concrete for radiation shielding10.1063/1.1698315 ↗
34. Microwave Sintering of Lunar Soil: Properties, Theory, and Practice10.1061/(ASCE)0893-1321(2005)18:3(188) ↗
35. M. Isachenkov, S. Chugunov, I. Akhatov, and I. Shishkovsky, “Regolith-based additive manufacturing for sustainable development of lunar infrastructure – An overview,” Acta Astronautica, vol. 180. Elsevier Ltd, pp. 650–678, Mar. 01, 2021. doi: 10.1016/j.actaastro.2021.01.005.10.1016/j.actaastro.2021.01.005 ↗
36. Building components for an outpost on the Lunar soil by means of a novel 3D printing technology10.1016/j.actaastro.2013.07.034 ↗
37. B. Khoshnevis, A. Carlson, N. Leach, and M. Thangavelu, “Contour crafting simulation plan for lunar settlement infrastructure buildup,” in Earth and Space 2012 - Proceedings of the 13th ASCE Aerospace Division Conference and the 5th NASA/ASCE Workshop on Granular Materials in Space Exploration, 2012, pp. 1458–1467. doi: 10.1061/9780784412190.155.10.1061/9780784412190.155 ↗
38. Digital light processing of lunar regolith structures with high mechanical properties10.1016/j.ceramint.2018.12.049 ↗
39. Extra-terrestrial construction processes – Advancements, opportunities and challenges10.1016/j.asr.2017.06.038 ↗
40. First demonstration on direct laser fabrication of lunar regolith parts10.1108/13552541211271992 ↗
41. Comparative study of epoxy and polyester resin-based polymer concretes10.1016/0143-7496(87)90071-6 ↗
42. Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250 °c10.1016/j.conbuildmat.2011.07.027 ↗
43. Carbon fiber reinforced concrete for smart structures capable of non-destructive flaw detection10.1088/0964-1726/2/1/004 ↗
44. Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete10.1016/j.matdes.2010.05.012 ↗
45. Engineered Aluminum Powder Microstructure and Mechanical Properties by Heat Treatment for Optimized Cold Spray Deposition of High-Strength Coatings10.1007/s11666-022-01455-4 ↗
46. Fatigue crack propagation behaviour of inconel 718 structures built using directed energy deposition based laser additive manufacturing10.1016/j.matlet.2020.128241 ↗
47. “Effect of bovine serum albumin on the lubricant properties of rice bran oil: a biomimetic approach”, Sadhana - Acad. Proc
48. Tribological and neutron radiation properties of boron nitride nanotubes reinforced titanium composites under lunar environment10.1557/s43578-022-00708-w ↗
49. Interface Engineering and Direct Observation of Strengthening Behavior in Field-Sintered Boron Nitride Nanotube-Magnesium Alloy Composite10.1002/adem.202000170 ↗
50. Direct Observation of Adhesion and Mechanical Behavior of a Single Poly(lactic- co-glycolic acid) (PLGA) Fiber Using an In Situ Technique for Tissue Engineering10.1021/acsami.2c09665 ↗
51. Unveiling enhanced oxidation resistance and mechanical integrity of multicomponent ultra-high temperature carbides10.1111/jace.18281 ↗
52. Profilometry-Based Indentation Plastometry for Evaluating Bulk Tensile Properties of Aluminum-Silicon Carbide Composites10.1002/adem.202201890 ↗
53. G. Seisdedos et al., “Assessment and Non-Destructive Evaluation of the Influence of Residual Solvent on a Two-Part Epoxy-Based Adhesive Using Ultrasonics,” Appl. Sci. 2023, Vol. 13, Page 3883, vol. 13, no. 6, p. 3883, Mar. 2023, doi: 10.3390/APP13063883.10.3390/app13063883 ↗
54. J. Dubon, G. Seisdedos, M. Ontiveros, B. Boesl, and D. McDaniel, “Bond quality evaluation using adhesive doped with magneto-electric nanoparticles,” in 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021, 2021, vol. 3, no. 0, pp. 1789–1801. doi: 10.12783/asc36/35876.10.12783/asc36/35876 ↗
55. G. Seisdedos, B. Hernandez, J. Dubon, M. Ontiveros, B. Boesl, and D. McDaniel, “Non-destructive evaluation of mechanical damage of adhesives using magneto-electric nanoparticles,” in 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021, 2021, vol. 1, no. 0, pp. 303–311. doi: 10.12783/asc36/35763.10.12783/asc36/35763 ↗
56. Multifunctional MEN-Doped Adhesives: Strengthening, Bond Quality Evaluation, and Variations in Magnetic Signal with Environmental Exposure10.3390/app12168238 ↗
57. P. Easter, C. Lambert, K. Long-Fox, and D. Britt, “Specific Gravity of Exolith Lab Lunar Regolith Simulant,” 2022.
58. C. Millwater, J. Long-Fox, Z. Landsman, A. Metke, and D. Britt, “Direct Sheer Measurements of Lunar Regolith Simulants LHS-1, LHS-1D, LMS-1, and LMS-1D,” 53rd Lunar Planet. Sci. Conf., vol. 2678, p. 2038, 2022, [Online]. Available: https://ui.adsabs.harvard.edu/abs/2022LPICo2678.2038M/exportcitation.
59. Geomechanical properties of lunar regolith simulants LHS-1 and LMS-110.1016/j.asr.2023.02.034 ↗
60. Heiken · 1991
61. P. Easter, J. Long-Fox, Z. Landsman, A. Metke, and D. Britt, “Comparing the Effects of Mineralogy and Particle Size Distribution on the Angle of Repose for Lunar Regolith Simulants,” 53rd Lunar Planet. Sci. Conf., vol. 2678, no. July, p. 1980, 2022, [Online]. Available: https://www.researchgate.net/profile/Parks-Easter/publication/359876335_Comparing_the_Effects_of_Mineralogy_and_Particle_Size_Distribution_on_the_Angle_of_Repose_for_Lunar_Regolith_Simulants/links/625458fbb0cee02d6963c53a/Comparing-the-Effects-of-Mineralo.
62. B. J. Ledlie Klosky, S. Sture, H.-Y. Ko, and F. Barnes, “Geotechnical Behavior of JSC-1 Lunar Soil Simulant,” J. Aerosp. Eng., vol. 13, no. 4, pp. 133–138, Oct. 2000, doi: 10.1061/(ASCE)0893-1321(2000)13:4(133).10.1061/(ASCE)0893-1321(2000)13:4(133) ↗
63. ASTM C39, “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens 1,” ASTM Stand. B., vol. i, no. March, pp. 1–5, 2003, doi: 10.1520/C0039.
64. Cylinder or cube: Strength testing of 80 to 200 MPa (11.6 to 29 ksi) ultra-high-performance fiber-reinforced concrete
65. P. Materials, E. I. Materials, P. Matrix, C. Materials, and P. Specimens, “Standard Test Method for Tensile Properties of Plastics 1,” no. January 2004, pp. 1–15, 2006, doi: 10.1520/D0638-22.1.
66. Y. Takahashi, T. Sekine, and M. Yokoyama, “SPICE model of memristive device using Tukey window function,” IEICE Electron. Express, vol. 12, no. 5, Feb. 2015, doi: 10.1587/elex.12.20150149.10.1587/elex.12.20150149 ↗
67. C. Pantea et al., “Digital ultrasonic pulse-echo overlap system and algorithm for unambiguous determination of pulse transit time,” Review of Scientific Instruments, vol. 76, no. 11. AIP Publishing, pp. 1–9, Nov. 01, 2005. doi: 10.1063/1.2130715.10.1063/1.2130715 ↗
68. A broadband wavelet implementation for rapid ultrasound pulse-echo time-of-flight measurements10.1063/5.0010475 ↗
69. Evaluation of the transmission line model for couplant layer corrections in pulse-echo measurements10.1109/TUFFC.2013.2651 ↗
70. Ultrasonic Measurement of the Dynamic Elastic Moduli of Small Metal Samples10.1520/JTE12056J ↗
71. Estimating compressive strength of concrete containing untreated coal waste aggregates using ultrasonic pulse velocity10.3390/ma14030647 ↗
72. Prediction of concrete strength using ultrasonic pulse velocity and artificial neural networks10.1016/j.ultras.2008.05.001 ↗
73. W. Kim, K. Jeong, H. Choi, and T. Lee, “Correlation Analysis of Ultrasonic Pulse Velocity and Mechanical Properties of Normal Aggregate and Lightweight Aggregate Concretes in 30–60 MPa Range,” Materials (Basel)., vol. 15, no. 8, Apr. 2022, doi: 10.3390/ma15082952.10.3390/ma15082952 ↗
74. Experimental determination of dynamic modulus of elasticity of concrete with ultrasonic pulse velocity method and ultrasonic pulse echo method10.1088/1757-899X/1252/1/012018 ↗
75. American Concrete Institute (ACI), MNL-17(21) - ACI Reinforced Concrete Design Handbook. American Concrete Institute, 2021. Accessed: Jun. 05, 2023. [Online]. Available: https://www.concrete.org/store/productdetail.aspx?ItemID=MNL1721&Language=English&Units=US_Units.
76. Prediction of concrete tensile strength from its compressive strength. Evaluation of existing relations for normal weight concrete