Combined modification of asphalt with organic attapulgite (OATT) and polyurethane (PU): preparation, properties and modification mechanisms
Source abstract
Abstract
Polyurethane (PU) and attapulgite (ATT) have been proven to have good effects on asphalt modification. This study proposes to use both PU and organic attapulgite (OATT) to prepare a modified asphalt, aiming to improve the comprehensive performance of asphalt and study the synergistic modification effect of PU and OATT on asphalt. Firstly, the structure and composition of ATT and OATT were determined by X-ray diffraction, scanning electron microscope, and Fourier transform infrared spectroscopy. Then the OATT/PU modified asphalt was investigated in terms of compatibility, basic physical properties, high- and low-temperature rheological properties, and high-temperature stability. Results indicated that the organic modifier was successfully grafted onto ATT. OATT and PU present a good synergy in asphalt and play a significant role in improving the high- and low-temperature performance of modified asphalt. The addition of OATT led to significant and consistent improvement in the high-temperature performance of the OATT/PU modified asphalt. At the same time, the increase of OATT content also helps to improve the low-temperature performance of the modified asphalt. Finally, the optimum contents of modifiers are recommended. The modified asphalt 3 wt%OATT/7wt%PU is suggested for areas with long duration of high temperatures, while 3 wt%OATT/9wt%PU is suggested for areas with long duration of low temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Damping properties of interpenetrating polymer networks of polyurethane-modified epoxy and polyurethanes10.1002/(SICI)1097-4628(19991010)74:2<328::AID-APP14>3.0.CO;2-W ↗
2. Enhancement of microphase ordering and mechanical properties of supramolecular hydrogen-bonded polyurethane networks10.1039/C8PY00604K ↗
3. Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing10.1039/C6TC03713E ↗
4. Thermosetting characteristics and performances of polyurethane material on airport thin-overlay10.1016/j.conbuildmat.2022.128252 ↗
5. Mechanical property of early-strength water-containing unsaturated polyurethane concrete
6. Modification of asphalt using polyurethanes synthesized with different isocyanates10.1016/j.conbuildmat.2022.126959 ↗
7. Performance of polyurethane modified asphalt and its mixtures10.1016/j.conbuildmat.2018.10.025 ↗
8. Preparation, properties and modification mechanism of polyurethane modified emulsified asphalt10.1016/j.conbuildmat.2018.08.177 ↗
9. Improving the performance of RET modified asphalt with the addition of polyurethane prepolymer10.1016/j.conbuildmat.2019.02.101 ↗
10. Research and development trends of polyurethane modified asphalt
11. Recent applications and developments of polyurethane materials in pavement engineering10.1016/j.conbuildmat.2021.124639 ↗
12. Study on performance of polyurethane modified asphalt mixture
13. Moran · 1991
14. influence of thermoplastic polyurethane and synthesized polyurethane additive in performance of asphalt pavements10.1016/j.conbuildmat.2018.01.093 ↗
15. Use of polyurethane Precursor-Based modifier as an Eco-Friendly approach to improve performance of asphalt10.1061/JPEODX.0000279 ↗
16. Preparation and rheological behavior of polyurethane pre-polymer modified asphalt
17. Study on a thermosetting polyurethane modified asphalt suitable for bridge deck pavements: Formula and properties10.1016/j.conbuildmat.2020.118122 ↗
18. A laboratory study of epoxy/polyurethane modified asphalt binders and mixtures suitable for flexible bridge deck pavement10.1016/j.conbuildmat.2020.122084 ↗
19. Green tunnel pavement: Polyurethane ultra-thin friction course and its performance characterization10.1016/j.jclepro.2020.125131 ↗
20. Effects of polyurethane thermoplastic elastomer on properties of asphalt binder and asphalt mixture10.1061/(ASCE)MT.1943-5533.0003591 ↗
21. Preparation and properties of polyurethane/epoxy-resin modified asphalt binders and mixtures using a bio-based curing agent10.1016/j.jclepro.2022.135030 ↗
22. Investigation on the epoxy/polyurethane modified asphalt binder cured with bio-based curing agent: Properties and optimization10.1016/j.conbuildmat.2021.126221 ↗
23. Development of empirical model for predicting g∗/Sinδ and viscosity value for nanoclay and carbon Nano tube modified asphalt binder10.1016/j.conbuildmat.2018.01.021 ↗
24. Laboratory evaluation of composed modified asphalt binder and mixture containing nano-silica/rock asphalt/SBS10.1016/j.conbuildmat.2018.03.187 ↗
25. Effects of nanoclay on rheological properties of bitumen binder10.1016/j.conbuildmat.2009.02.027 ↗
26. Investigation on thermo-rheological properties and stability of SBR modified asphalts containing palygorskite clay10.1002/app.30223 ↗
27. Preparation and property analysis of cold patch asphalt mixture
28. The structural scheme of attapulgite
29. Mechanical properties of natural rubber nanocomposites filled with thermally treated attapulgite10.1155/2013/496584 ↗
30. Dynamic adsorption of Cd2+ onto acid-modified attapulgite from aqueous solution10.1346/CCMN.2014.0620505 ↗
31. Improving the controlled-release effects of composite flame retardant by loading on porous attapulgite and coating10.1016/j.ceramint.2022.10.281 ↗
32. Preparation and decoloration property of polystyrene-grafted palygorskite nanoparticles10.1016/j.matlet.2007.01.041 ↗
33. Study on superabsorbent composite. IV. Effects of organification degree of attapulgite on swelling behaviors of polyacrylamide/organo-attapulgite composites10.1016/j.eurpolymj.2005.06.029 ↗
34. Efficiency of different clay minerals modified with a cationic surfactant in the adsorption of pesticides: influence of clay type and pesticide hydrophobicity10.1016/j.clay.2005.07.008 ↗
35. Thermal and mechanical properties of natural fibrous nanoclay reinforced epoxy asphalt adhesives10.1016/j.ijadhadh.2018.07.005 ↗
36. Thermal, mechanical properties, and low-temperature performance of fibrous nanoclay-reinforced epoxy asphalt composites and their concretes10.1002/app.41694 ↗
37. Rheological and adhesion properties of nano-organic palygorskite and linear SBS on the composite modified asphalt10.1016/j.powtec.2020.08.080 ↗
38. Synergy effect of nano-organic palygorskite on the properties of star-shaped SBS-modified asphalt10.3390/polym13060863 ↗
39. B. Trivedi, Maleic anhydride, Springer Science & Business Media2013.
40. Rheological modification of bitumen with maleic anhydride and dicarboxylic acids10.1016/S0016-2361(98)00120-3 ↗
41. Reaction of asphalt and maleic anhydride: Kinetics and mechanism10.1016/j.cej.2010.08.020 ↗
42. Investigation of the performance and micro-evolution mechanism of low-content thermosetting epoxy asphalt binder towards sustainable highway and bridge decks paving10.1016/j.jclepro.2022.135588 ↗
43. Powder-diffraction patterns and structural models for palygorskite
44. D.A. Melo, J.A.C. Ruíz, M.A.d.F. Melo, E. Sobrinho, A.E. Martinelli, Preparation and characterization of lanthanum palygorskite clays as acid catalysts, Journal of Alloys and Compounds 344(1-2) (2002) 352-355.10.1016/S0925-8388(02)00384-5 ↗
45. An insight in the structure of a palygorskite from palygorskaja: Some questions on the standard model10.1016/j.clay.2017.08.006 ↗
46. Adsorption study for removal of congo red anionic dye using organo-attapulgite10.1007/s10450-009-9155-z ↗
47. Acid activation of a palygorskite with HCl: Development of physico-chemical, textural and surface properties10.1016/0169-1317(95)00007-Q ↗
48. Bacteria-Adsorbed palygorskite stabilizes the quaternary phosphonium salt with Specific-Targeting capability, Long-Term antibacterial activity, and lower cytotoxicity10.1021/la400824f ↗
49. Influence of the prepolymer molecular weight and free isocyanate content on the rheology of polyurethane modified bitumens10.1016/j.eurpolymj.2014.05.013 ↗
50. The synergistic effect of organic montmorillonite and thermoplastic polyurethane on properties of asphalt binder10.1016/j.conbuildmat.2019.116867 ↗
51. M. Jia, Preparation of organic rectorite suitable for asphalt matrix and study on its modified asphalt properties, China Master’s Thesis, Chang’an University, 2017.
52. L. Wei, Preparation of Organized Montmorillonite Suitable for Asphalt Matrix and Study on Its Modified Asphalt, China Master’s Thesis, Chang’an University, 2017.
53. Analysis of OMMT strengthened UV aging-resistance of Sasobit/SBS modified asphalt: Its preparation, characterization and mechanism10.1016/j.jclepro.2021.128139 ↗
54. Investigation on the high-and Low-Temperature performance of organic rectorite and polyurethane Composite-Modified asphalt binder10.1061/JMCEE7.MTENG-15896 ↗
55. The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review10.1016/j.conbuildmat.2019.07.213 ↗
56. Z. Zhang, L. Wang, J. Sun, H. Liu, S. Chen, X. Li, D. Zhang, Z. Wang, Y. Wei, Using Organic Rectorite (Orec) and Polyurethane (Pu) to Enhance Both High-and Low-Temperature Performance of Asphalt Binder, Available at SSRN 4067098.
57. Physical properties and microstructures of organic rectorites and their modified asphalts10.1016/j.conbuildmat.2018.01.163 ↗
58. Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites10.1016/S0032-3861(00)00325-6 ↗
59. Irradiation graft polymerization on nano-inorganic particles: An effective means to design polymer-based nanocomposites10.1023/A:1006711326705 ↗
60. Modification mechanism and performance of polyurethane modified asphalt
61. The performance and distribution of Polyurethane-Modified asphalt that exhibits different molecular weights10.3390/su15086627 ↗
62. Preparation and properties of flame-retardant asphalt containing polyurethane and eco-friendly flame retardants10.1016/j.conbuildmat.2023.130996 ↗
63. Development of shape memory polyurethane/SBS compositely modified asphalt and synergistic modification mechanism10.1016/j.conbuildmat.2022.129936 ↗
64. Near-infrared and mid-infrared spectroscopic study of sepiolites and palygorskites10.1016/S0924-2031(01)00110-2 ↗