journal article·2023-11

Study on mechanical properties and fracture behaviours of rock-mortar specimens with an interface crack under radial compression

Houqiang Wang, Zhixiang Liu, Tengfei Guo

Publisher page

Abstract

Rock-mortar (R-M) structures are commonly used in underground mines to ensure safe mining production. However, the imperfect bonding between rock and mortar leads to initial cracks at the R-M interface, posing a significant challenge to mining operations. To better understand the fracture properties of R-M composite structures containing an interface crack, this study developed numerical models of R-M disc specimens using the particle flow code (PFC2D) and validated them through laboratory tests. Subsequently, Brazilian splitting tests at a rate of 0.15 mm/min were conducted to study the effects that the length-to-diameter ratio ( a/ R) and crack inclination angle ( θ) have on the fracture properties of R-M structure. The results reveal that the peak load of R-M specimens decreased with the increasing a/ R and increased with the increasing θ. As a/ R increases, the difference between the peak loads of R-M specimens with larger θ and those with smaller θ increases. For a/ R = 0.2 and 0.4, the cracks in the R-M specimens with θ = 0°, 15°, 30°, 45° and 60° primarily initiated from the interface crack tips, while those with θ = 75° and 90° initiated away from the interface crack tips. The larger the θ, the closer the initiation location was to the center of interface crack. For a/ R = 0.6 and 0.8, the cracks no longer initiated from the interface crack tips at θ = 60°. Additionally, cracks were more likely to initiate and propagate in mortar with lower strength. Moreover, a fracture criterion was established and validated. This criterion provides a quantitative method to predict the failure of R-M structures.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures · Landslides and related hazards

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Thermal effects on tensile behavior and failure characteristics of granite-concrete bi-materials with different loading directions10.1016/j.conbuildmat.2023.132155 ↗
2. Influence of surface roughness and hydrophilicity on bonding strength of concrete-rock interface10.1016/j.conbuildmat.2019.04.078 ↗
3. Influence of interface roughness and rock type on mixed mode fracture characteristics of tunnel shotcrete-rock interface10.1016/j.conbuildmat.2023.131521 ↗
4. Strain field evolution and crack coalescence mechanism of composite strength rock-like specimens with sawtooth interface10.1016/j.tafmec.2023.103947 ↗
5. Water saturation effects on mechanical performances and failure characteristics of rock-concrete disc with different interface dip angles10.1016/j.conbuildmat.2022.126684 ↗
6. Sandstone-concrete interface debonding mechanism under freeze-thaw actions: Fracture process and fracture criterion10.1016/j.conbuildmat.2021.123526 ↗
7. Cracking behaviours of layered specimen with an interface crack in Brazilian tests10.1016/j.engfracmech.2020.106904 ↗
8. Dynamic fracture behavior and fracture toughness analysis of rock-concrete bi-material with interface crack at different impact angles10.1016/j.conbuildmat.2022.129286 ↗
9. Crack propagation characteristics and fracture toughness analysis of rock-based layered material with pre-existing crack under semi-circular bending10.1016/j.tafmec.2022.103295 ↗
10. Experimental and numerical investigation on the mechanical characteristics and failure mechanism of cracked coal & rock-like combined sample under uniaxial compression10.1016/j.tafmec.2022.103583 ↗
11. Tensile strength and failure behavior of rock-mortar interfaces: Direct and indirect measurements
12. Compression failure conditions of concrete-granite combined body with different roughness interface10.1016/j.ijmst.2022.12.002 ↗
13. Experimental investigation of the Rock-Concrete bi materials influence of inclined interface on strength and failure behavior10.1016/j.ijrmms.2019.104119 ↗
14. Experimental study on the influence of coal-rock interface strength on crack propagation law of supercritical carbon dioxide fracturing
15. Micro-macro damage, deterioration and cracking of heterogeneous composite rock masses with non-penetrating cracks under uniaxial compression10.1016/j.tafmec.2023.103919 ↗
16. Crack extension at the concrete–rock interface damaged by high-pressure water environment: DIC research10.1016/j.tafmec.2023.103966 ↗
17. Static and dynamic fracture behavior of rock-concrete bi-material disc with different interface crack inclinations10.1016/j.tafmec.2022.103659 ↗
18. Mechanical properties and failure behavior of rock with different flaw inclinations under coupled static and dynamic loads10.1007/s11771-020-4520-x ↗
19. Experimental investigation on crack coalescence and strength loss of rock-like materials containing two parallel water-filled flaws under freeze–thaw10.1016/j.tafmec.2022.103669 ↗
20. Three-dimensional cracking and coalescence of two spatial-deflection joints in rock-like specimens under uniaxial compression10.1016/j.ijrmms.2022.105196 ↗
21. Damage evolution of rock containing prefabricated cracks based on infrared radiation and energy dissipation10.1016/j.tafmec.2023.103853 ↗
22. Damage characteristics of sandstone with different crack angles subjected to true triaxial cyclic loading and unloading10.1016/j.tafmec.2022.103444 ↗
23. Effects of pre-existing single crack angle on mechanical behaviors and energy storage characteristics of red sandstone under uniaxial compression10.1016/j.tafmec.2021.102933 ↗
24. Failure mechanism and acoustic emission characteristics of rock specimen with edge crack under uniaxial compression10.1007/s10706-018-0750-1 ↗
25. Experimental study of the effect of length and angle of cross-cracks on tensile strength of rock-like material
26. Strength and failure characteristics of rocklike material containing a large-opening crack under uniaxial compression: experimental and numerical studies10.1061/(ASCE)GM.1943-5622.0001477 ↗
27. Experimental study on the influence of prefabricated fissure size on the directional propagation law of rock type-I crack10.1016/j.ijrmms.2022.105274 ↗
28. On the stress distribution at the base of a stationary crack10.1115/1.4011454 ↗
29. The stresses around a fault or crack in dissimilar media10.1785/BSSA0490020199 ↗
30. A crack between dissimilar media10.1115/1.3625813 ↗
31. Interface crack with friction in the contact zone10.1115/1.3424179 ↗
32. Plane problems of cracks in dissimilar media10.1115/1.3625816 ↗
33. Elastic fracture mechanics concepts for interfacial cracks10.1115/1.3173668 ↗
34. A note on fracture criteria for interface fracture10.1023/A:1007612613338 ↗
35. Strength failure behavior and crack evolution mechanism of granite containing pre-existing non-coplanar holes: Experimental study and particle flow modeling10.1016/j.compgeo.2017.03.015 ↗
36. Sensitivity analysis of macroscopic mechanical behavior to microscopic parameters based on PFC simulation10.1007/s10706-022-02118-5 ↗
37. Numerical investigation and experimental study on fracture processes of central flawed sandstone Brazilian discs
38. Brazil splitting characteristics of coal-backfilling composite structure with different interface angles: Insights from laboratory experiment and numerical simulation10.1007/s11771-023-5231-x ↗
39. Fracture propagation and coalescence at bedding plane in layered rocks10.1016/j.jsg.2020.104213 ↗
40. Macro and meso crack evolution of granite specimens with non-straight fissures: A comparison between two bond models10.1016/j.tafmec.2023.103890 ↗
41. Crack propagation process and acoustic emission characteristics of rock-like specimens with double parallel flaws under uniaxial compression10.1016/j.tafmec.2021.102983 ↗
42. Discrete element study on mechanical response and pressure relief effect of rock containing variable hole10.1016/j.tafmec.2023.103976 ↗
43. Cracking behavior of rock containing non-persistent joints with various joints inclinations10.1016/j.tafmec.2020.102701 ↗
44. A clumped particle model for rock10.1016/j.ijrmms.2007.02.002 ↗
45. Influence of intergranular friction weakening on rock avalanche dynamics10.1016/j.compgeo.2023.105440 ↗
46. Mechanical properties of rock with pre-cracks anchored by constant resistance and large deformation cables based on particle flow codes10.1016/j.engfailanal.2022.106781 ↗
47. Numerical study on the shear behavior of concrete-rock joints with similar triangular asperities10.1016/j.compgeo.2023.105468 ↗
48. Experimental and numerical investigation on crack mechanism of folded flawed rock-like material under uniaxial compression10.1016/j.enggeo.2021.106210 ↗
49. A numerical study of wave propagation and cracking processes in rock-like material under seismic loading based on the bonded-particle model approach10.1016/j.eng.2021.09.023 ↗
50. Interface fracture mechanics: theory and experiment10.1007/s10704-015-9997-1 ↗
51. The interface crack10.1115/1.3424148 ↗
52. Mechanics and thermodynamics of brittle interfacial failure in bimaterial systems
53. SIF-based fracture criterion for interface cracks10.1007/s10409-015-0551-1 ↗
54. G.R. Irwin, Analysis of stresses and strains near the end of a crack traversing a plate, (1957).10.1115/1.4011547 ↗
55. Mixed mode fracture criteria for an interface crack