journal article·2023-12Open access

Effectiveness of the different eutectic phase-change materials in cooling asphalt pavement

Jiasheng Dai, Feng Ma, Zhen Fu, Jenny Liu, Chen Li, Yingjie Hou, Hanli Wu

Abstract

Choosing a phase-change material (PCM) adapted to the specific phase-change temperature (T m ) required for each temperature condition is of utmost importance in cooling pavements. Eutectic phase-change materials (EPCMs) realize the customization of the desired T m and reduce the difficulty of matching PCMs. This work aims to investigate the effectiveness of a group of binary/ternary EPCMs with T m ranging from 30 to 60 ℃ and melting enthalpies of around 200 J/g as thermal regulation components for different asphalt. To achieve this goal, the thermal and rheological properties of phase-change asphalt binders (PCAB) were evaluated by differential scanning calorimeter, thermogravimetric, Fourier transform infrared, and multiple stress creep and recovery tests. The results showed that PCAB with latent heat improved the specific heat capacity, which brought a maximum temperature lag of 134.5 min and a maximum temperature difference of 11 ℃. Similarly, the PCAB remained chemical stability, and its thermal stability complied with the construction temperature specifications. However, the recrystallization of EPCMs was impeded by the molten asphalt binder matrix, resulting in a significant reduction in both the T m and enthalpy. Therefore, these reductions should be taken into consideration when choosing an EPCM. Additionally, as liquid EPCM softens the binder, the absence of elasticity in solid EPCMs renders the binder stiff, thus reducing its resistance to deformation. These impacts were particularly noticeable in Styrene-Butadiene-Styrene modified asphalt due to the polymer network being dissolved by liquefication-EPCMs. To sum up, EPCMs with a higher T m (40–60 ℃) may decrease their negative impact on deformation resistance, such as palmitic acid-myristic acid-methyl stearate mixtures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Asphalt Pavement Performance Evaluation · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Experimental study of the performance of porous ultra-thin asphalt overlay10.1080/10298436.2020.1837826 ↗
2. Environmentally tuning asphalt pavements using microencapsulated phase change materials10.1177/03611981211068366 ↗
3. A review on the development of cool pavements to mitigate urban heat island effect10.1016/j.rser.2015.07.177 ↗
4. Technology method and functional characteristics of road thermoelectric generator system based on Seebeck effect10.1016/j.apenergy.2022.120459 ↗
5. A solid–solid phase change filler with enhanced thermal properties for cooling asphalt mastic10.1016/j.solener.2022.07.024 ↗
6. Evaluation of the capability of regional climate models in reproducing the temporal clustering in heavy precipitation over europe10.1016/j.atmosres.2022.106027 ↗
7. Research and exploration of phase change materials on solar pavement and asphalt pavement: A review10.1016/j.est.2021.102246 ↗
8. A. Flávia Justino Uchoa, W. da Silva Rocha, J. Peter Macedo Feitosa, R. Lopes Nogueira, D. Hellen Almeida de Brito, J. Barbosa Soares, S. de Aguiar Soares, Bio-based palm oil as an additive for asphalt binder: Chemical characterization and rheological properties, Construction and Building Materials 285 (2021).10.1016/j.conbuildmat.2021.122883 ↗
9. Thermal performance of cooling strategies for asphalt pavement: A state-of-the-art review10.1016/j.jtte.2021.02.001 ↗
10. Using cool pavements as a mitigation strategy to fight urban heat island—A review of the actual developments10.1016/j.rser.2013.05.047 ↗
11. T. Minh Phan, D.-W. Park, T. Ho Minh Le, Improvement on rheological property of asphalt binder using synthesized micro-encapsulation phase change material, Construction and Building Materials 287 (2021).10.1016/j.conbuildmat.2021.123021 ↗
12. Phase change material based advance solar thermal energy storage systems for building heating and cooling applications: A prospective research approach
13. Effects of aging on asphalt binders modified with microencapsulated phase change material10.1016/j.compositesb.2019.107007 ↗
14. A cross-scale ‘material-component-system’ framework for transition towards zero-carbon buildings and districts with low, medium and high-temperature phase change materials10.1016/j.scs.2022.104378 ↗
15. Numerical analysis of phase change materials for optimizing the energy balance of a nearly zero energy building10.1016/j.scs.2020.102441 ↗
16. Assessing the feasibility of incorporating phase change material in hot mix asphalt10.1016/j.scs.2015.06.005 ↗
17. Effect of pavement materials on surface temperatures in tropical environment10.1016/j.scs.2016.01.011 ↗
18. Numerical analysis of thin building envelope-integrated phase change material towards energy-efficient buildings in severe hot location10.1016/j.scs.2022.104365 ↗
19. Developing a solid–solid phase change heat storage asphalt pavement material and its application as functional filler for cooling asphalt pavement10.1016/j.enbuild.2023.112935 ↗
20. Regulating asphalt pavement temperature using microencapsulated phase change materials (PCMs)10.1016/j.conbuildmat.2022.128924 ↗
21. Optimization of phase change materials used in asphalt pavement to prevent rutting
22. Study on the rheological properties and phase-change temperature regulation of asphalt modified by high/low-temperature phase change material particles10.1016/j.est.2022.105970 ↗
23. Thermal and rheological performance of asphalt binders modified with expanded graphite/polyethylene glycol composite phase change material10.1016/j.conbuildmat.2018.11.011 ↗
24. Study of temperature-adjustment asphalt mixtures based on silica-based composite phase change material and its simulation10.1016/j.conbuildmat.2022.127871 ↗
25. Laboratory evaluation of poly(ethylene glycol) for cooling of asphalt pavements10.1016/j.conbuildmat.2020.121774 ↗
26. Preparation and thermal properties of mineral-supported polyethylene glycol as form-stable composite phase change materials (CPCMs) used in asphalt pavements10.1038/s41598-017-17224-1 ↗
27. Stearic acid/expanded graphite as a composite phase change thermal energy storage material for tankless solar water heater10.1016/j.scs.2018.10.041 ↗
28. thermal reliability of typical fatty acids as phase change materials based on 10,000 accelerated thermal cycles10.1016/j.scs.2018.12.008 ↗
29. The ingenious combination of thermal energy storage and temperature visualization of binary fatty acid eutectic/eucalyptus wood fiber skeleton composites10.1016/j.solener.2022.03.029 ↗
30. Preparation and thermal performance of methyl palmitate and lauric acid eutectic mixture as phase change material10.1016/j.est.2017.08.005 ↗
31. Preparation and thermal properties of capric acid/palmitic acid eutectic mixture as a phase change energy storage material10.1016/j.matlet.2007.07.025 ↗
32. Shape stabilized attapulgite/myristic-palmitic acid composite PCM for thermal energy storage implementations in buildings
33. Lauric and palmitic acids eutectic mixture as latent heat storage material for low temperature heating applications10.1016/j.energy.2004.05.017 ↗
34. Thermal energy storage characteristics of myristic and stearic acids eutectic mixture for low temperature heating applications10.1016/S1004-9541(06)60070-0 ↗
35. A capric–palmitic–stearic acid ternary eutectic mixture/expanded graphite composite phase change material for thermal energy storage10.1016/j.compositesa.2016.04.024 ↗
36. Preparation and characterization of lauric–myristic–palmitic acid ternary eutectic mixtures/expanded graphite composite phase change material for thermal energy storage10.1016/j.cej.2013.07.008 ↗
37. phase diagrams, eutectic mass ratios and thermal energy storage properties of multiple fatty acid eutectics as novel solid-liquid phase change materials for storage and retrieval of thermal energy10.1016/j.applthermaleng.2016.11.158 ↗
38. Fatty acids based eutectic phase change system for thermal energy storage applications10.1016/j.applthermaleng.2018.07.025 ↗
39. Preparation, characterization and thermal properties of fatty acid eutectics/bentonite/expanded graphite composites as novel form stable thermal energy storage materials10.1016/j.solmat.2017.03.026 ↗
40. Theoretic prediction of melting temperature and latent heat for a fatty acid eutectic mixture10.1021/je200057j ↗
41. Applicability assessment of stearic acid/palmitic acid binary eutectic phase change material in cooling pavement10.1016/j.renene.2021.05.063 ↗
42. Assessing the direct interaction of asphalt binder with stearic acid/palmitic acid binary eutectic phase change material10.1016/j.conbuildmat.2021.126251 ↗
43. P. Marsac, N. Piérard, L. Porot, W. Van den bergh, J. Grenfell, V. Mouillet, S. Pouget, J. Besamusca, F. Farcas, T. Gabet, M. Hugener, Potential and limits of FTIR methods for reclaimed asphalt characterisation, Materials and Structures 47(8) (2014) 1273-1286.10.1617/s11527-014-0248-0 ↗
44. Evaluation of interfacial region of microphase-separated SEBS using modulated differential scanning calorimetry and dynamic mechanical thermal analysis10.1016/j.polymertesting.2017.07.006 ↗
45. Study on rheological properties and phase-change temperature control of asphalt modified by polyurethane solid-solid phase change material10.1016/j.solener.2019.11.007 ↗
46. Fourier-transform infrared (FTIR) fingerprinting for quality assessment of protein hydrolysates10.1016/j.lwt.2021.112339 ↗
47. Preparation and properties of palmitic-stearic acid eutectic mixture/expanded graphite composite as phase change material for energy storage10.1016/j.energy.2014.10.092 ↗
48. Assessment of the aging process of finished Product-Modified asphalt binder and its aging mechanism10.1061/(ASCE)MT.1943-5533.0004330 ↗
49. Thermal performance assessment of PCM incorporated cool concrete pavements using numerical analysis
50. Preparation of polyurethane solid-solid low-temperature PCMs granular asphalt mixes and study of phase change temperature control behavior10.1016/j.solener.2021.11.056 ↗
51. Fatty acids as phase change materials: A review10.1016/j.rser.2013.08.107 ↗
52. Temperature regulation and rheological properties assessment of asphalt binders modified with paraffin/ SiO2 micro-encapsulated phase change materials10.1016/j.conbuildmat.2023.130377 ↗
53. Preparation and properties of Bitumen-Modified polyurethane Solid-Solid phase change materials10.1061/(ASCE)MT.1943-5533.0002795 ↗
54. Laboratory investigation of phase change effect of polyethylene glycolon on asphalt binder and mixture performance10.1016/j.conbuildmat.2019.03.308 ↗
55. Correlation between rheological tests on bitumen and asphalt low temperature cracking tests10.1016/j.conbuildmat.2021.126109 ↗
56. Adhesion, rheology and temperature-adjusting performance of polyurethane-based solid–solid phase change asphalt mastics subjected to laboratory aging10.1617/s11527-023-02149-1 ↗
57. Thermoregulation, rheological properties and modification mechanism of asphalt modified with PUSSPCMs10.1016/j.conbuildmat.2023.130763 ↗
58. Roles of phase change materials on the morphological, physical, rheological and temperature regulating performances of high-viscosity modified asphalt10.1016/j.scitotenv.2023.162632 ↗