journal article·2023-12Open access

New insights on understanding the Portland cement hydration using electrical impedance spectroscopy

M. Bortoletto, A.O. Sanches, J.A. Santos, R.G. da Silva, M.M. Tashima, J. Payá, L. Soriano, M.V. Borrachero, J.A. Malmonge, J.L. Akasaki

Abstract

[EN] This study aimed to bring new perspectives and understandings, as well as to elucidate the behavior of Portland cement hydration through electrical conductivity curves obtained by impedance spectroscopy (IS). The IS measurement was performed on Portland cement paste with w/c ratio of 0.40 up to 28 curing days. According to the results, based on the inflection points of its respective derivative, the electrical conductivity curve of Portland cement paste can be subdivided into eight different regions. A new region (region IV) in the acceleration period, characterized by the resume of dissolution reactions and microstructure formation with the paste in a semi-fluid state, was established. Moreover, a shoulder observed in region VI was attributed to the formation of AFt phases from the reduction of CaSO4, and secondary reactions of ionic release in the pore network. Hence, new insights on the electrical conductivity curve of Portland cement paste are reported confirming the IS as a sensitive and promising technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Electrochemical cell design and impedance spectroscopy of cement hydration10.1007/s10853-020-05397-6 ↗
2. J. Beaudoin, I. Odler, Hydration, Setting and Hardening of Portland Cement, in: Lea’s Chem. Cem. Concr., 5th ed., Elsevier, 2019: pp. 157–250. https://doi.org/10.1016/B978-0-08-100773-0.00005-8.10.1016/B978-0-08-100773-0.00005-8 ↗
3. Advances in understanding hydration of Portland cement10.1016/j.cemconres.2015.05.025 ↗
4. Multi-scale observations of structure and chemical composition changes of portland cement systems during hydration10.1016/j.conbuildmat.2019.04.013 ↗
5. Quasi-elastic neutron scattering (QENS) and its application for investigating the hydration of cement-based materials: State-of-the-art10.1016/j.matchar.2021.110890 ↗
6. Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography10.1016/j.conbuildmat.2012.07.012 ↗
7. Early hydration and microstructure formation of Portland cement paste studied by oscillation rheology, isothermal calorimetry, 1H NMR relaxometry, conductance and SAXS10.1016/j.cemconres.2020.105977 ↗
8. Hydration monitoring of cement-based materials with resistivity and ultrasonic methods10.1617/s11527-008-9363-0 ↗
9. Ageing of oilfield cement at high humidity: a combined FEG-ESEM and Raman microscopic investigation10.1039/b203127m ↗
10. Monitoring of Portland cement chemical reaction and quantification of the hydrated products by XRD and TG in function of the stoppage hydration technique10.1007/s10973-018-7734-5 ↗
11. AC impedance spectroscopy of cement - based materials: measurement and interpretation10.1016/j.cemconcomp.2022.104591 ↗
12. The early hydration of Ordinary Portland Cement (OPC): An approach comparing measured heat flow with calculated heat flow from QXRD10.1016/j.cemconres.2011.09.001 ↗
13. Analyzing the filler and activity effect of fly ash and slag on the early hydration of blended cement based on calorimetric test10.1016/j.conbuildmat.2020.122201 ↗
14. Acceleration of cement hydration – A review of the working mechanisms, effects on setting time, and compressive strength development of accelerating admixtures10.1016/j.conbuildmat.2022.126554 ↗
15. Dielectric and electrical properties of ordinary Portland cement and slag cement in the early hydration period10.1007/BF00353116 ↗
16. Impedance measurements on cement paste10.1007/BF00720825 ↗
17. A review on microstructural characterization of cement-based materials by AC impedance spectroscopy10.1016/j.cemconcomp.2019.03.018 ↗
18. Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age10.1016/j.conbuildmat.2014.11.006 ↗
19. Nondestructive monitoring on hydration behavior of cement pastes via the electrochemical impedance spectroscopy method
20. Monitoring the evolution of material structure in cement pastes and concretes using electrical property measurements10.1016/j.conbuildmat.2013.08.038 ↗
21. Sosa Gallardo · 2020
22. The review of early hydration of cement-based materials by electrical methods10.1016/j.conbuildmat.2017.04.073 ↗
23. Influence of chemical composition and inorganic admixtures on the electrical conductivity of hydrating cement pastes10.1557/JMR.1989.0215 ↗
24. Investigation of the hydration properties of cement with EDTA by alternative current impedance spectroscopy10.1016/j.cemconcomp.2021.104365 ↗
25. In-situ dynamic WetSEM imaging and electrical impedance measurements on Portland cement during early hydration10.1016/j.matchar.2018.05.028 ↗
26. Frequency- and time-domain dependency of electrical properties of cement-based materials during early hydration10.1520/ACEM20160057 ↗
27. Analysis of the influence of material parameters on electrical conductivity of cement pastes and concretes10.1680/macr.2008.00064 ↗
28. Electrical conductivity based characterization of plain and coarse glass powder modified cement pastes10.1016/j.cemconcomp.2007.05.005 ↗
29. The investigation of early hydration and pore structure for limestone powder wastes blended cement pastes10.1016/j.conbuildmat.2019.116923 ↗
30. Impedance spectroscopy of hydrating cement-based materials: measurement, interpretation, and application10.1111/j.1151-2916.1994.tb04507.x ↗
31. Characterization of physio-chemical processes and hydration kinetics in concretes containing supplementary cementitious materials using electrical property measurements10.1016/j.cemconres.2013.03.008 ↗
32. Xie, Evaluation of microstructural changes in fresh cement paste using AC impedance spectroscopy vs. oscillation rheology and 1 H NMR relaxometry10.1016/j.cemconres.2021.106556 ↗
33. ASTM International, Standard Specification for Portland Cement, (2022) 1–9. https://doi.org/10.1520/C0150.10.1520/C0150 ↗
34. ASTM International, Standard test methods for Time of Setting of Hydraulic Cement by Vicat Needle, (2019) 1–8. https://doi.org/10.1520/C0191-19.2.
35. A practical guide to microstructural analysis of cementitious materials
36. The use of electrical impedance spectroscopy for monitoring the hydration products of Portland cement mortars with high percentage of pozzolans10.1016/j.cemconres.2013.03.019 ↗
37. Electrical conductivity and rheological properties of ordinary Portland cement-silica fume and calcium hydroxide-silica fume pastes10.1016/S0008-8846(02)00809-8 ↗
38. Characterization of early-age hydration process of cement pastes based on impedance measurement10.1016/j.conbuildmat.2014.07.009 ↗
39. Direct measurements of 3d structure, chemistry and mass density during the induction period of C3s hydration10.1016/j.cemconres.2016.07.008 ↗
40. Dissolution theory applied to the induction period in alite hydration10.1016/j.cemconres.2010.01.012 ↗
41. Electrical conductivity of cement pastes10.1016/0008-8846(82)90106-5 ↗
42. Effects of microstructure and pore water on electrical conductivity of cement slurry during early hydration10.1016/j.compositesb.2019.107435 ↗