journal article·2023-12

Pull-out behaviour of steel fibres embedded in ultra-high-performance concrete after exposure to high temperatures

Dong Zhang, Jianwei Jiang, Yiwei Weng, Dehui Wang, Xiangguo Wu, Shengxin Fan

Publisher page

Abstract

The paper examined the bond-slip behaviour of steel fibres embedded in ultra-high-performance concrete (UHPC) after exposure to elevated temperatures. Different types of steel fibres were cast into the halved UHPC dog-bone-shaped samples, including straight fibres, three types of hooked-end fibres and corrugated fibres. The bond response was investigated through single fibre pull-out tests on the samples unheated and heated to 200, 400 and 600 °C. In addition, the effects of polypropylene (PP) fibre addition and heating rate on steel fibre’s bond behaviour were also investigated. The results revealed an increase in bond strength when the straight and hooked-end fibre samples were heated to 200 °C, while the bond strength of the corrugated fibre decreased at the same temperature. Bond strength reductions were observed at higher temperatures. In addition, the straight fibres led to the lowest pull-out resistance as both the hooked-end and the corrugated fibres significantly enhanced the bond strength. With the hooked-end or corrugated fibres, the failure mode gradually shifted from pull-out failure to fibre rupture. Besides, adding PP fibres increased the bond strength of straight fibres at 400 °C but reduced the bond strengths of hooked-end fibres at ambient and high temperatures. High heating rate also led to a greater bond strength for the straight fibres at 200 °C and 400 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. New development of ultra-high-performance concrete (UHPC)10.1016/j.compositesb.2021.109220 ↗
2. A review on ultra high performance concrete: Part I
3. A review on ultra high performance concrete: Part II10.1016/j.conbuildmat.2015.08.095 ↗
4. Investigation of the corrosion-induced damage mechanism of steel fibers in ultra-high-performance steel fiber-reinforced concrete using X-ray computed tomography10.1016/j.conbuildmat.2023.130429 ↗
5. Bond of FRP bars with different surface characteristics10.1016/j.conbuildmat.2020.119839 ↗
6. Analytical and statistical study of the bond of FRP bars with different surface characteristics10.1016/j.compstruct.2021.113953 ↗
7. Effects of the tensile properties of UHPC on the bond behavior10.1016/j.conbuildmat.2023.131990 ↗
8. Pullout damage analysis of steel fiber with various inclination angles and interface states in UHPC through acoustic emission and microscopic observation10.1016/j.jobe.2022.104271 ↗
9. A multi-scale study of enhancing mechanical property in ultra-high performance concrete by steel-fiber@ nano-silica10.1016/j.conbuildmat.2022.128069 ↗
10. Contribution of fiber–matrix interface enhancement on flexural properties of Ultra–high–performance concrete10.1016/j.cemconcomp.2022.104926 ↗
11. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
12. Hybrid effect of macro and micro steel fibers on the pullout and tensile behaviors of ultra-high-performance concrete10.1016/j.compositesb.2018.11.026 ↗
13. Pull-out behaviour of straight and hooked-end steel fibres under elevated temperatures10.1016/j.cemconres.2017.02.010 ↗
14. Pullout Behavior of High-Strength Steel Fibers Embedded in Ultra-High-Performance Concrete
15. Bond-slip response of novel half-hooked steel fibers in ultra-high-performance concrete10.1016/j.conbuildmat.2019.07.099 ↗
16. Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete10.1016/j.cemconcomp.2019.05.006 ↗
17. Steel fiber–matrix interfacial bond in ultra-high performance concrete: A review
18. Investigation on the effect of silane coupling agent treatment of steel fibers on the durability of UHPC10.1007/s43452-023-00667-x ↗
19. Pullout behavior of steel fibers with different shapes from ultra-high performance concrete (UHPC) prepared with granite powder under different curing conditions10.1016/j.conbuildmat.2019.03.274 ↗
20. How do fiber shape and matrix composition affect fiber pullout behavior and flexural properties of UHPC?10.1016/j.cemconcomp.2018.03.021 ↗
21. Chelate effect on fiber surface morphology and its benefits on pullout and tensile behaviors of ultra-high-performance concrete10.1016/j.cemconcomp.2020.103864 ↗
22. Achieving slip-hardening behavior of sanded straight steel fibers in ultra-high-performance concrete10.1016/j.cemconcomp.2020.103669 ↗
23. Effects of brass coating and nano-SiO2 coating on steel fiber–matrix interfacial properties of cement-based composite10.1016/j.compositesb.2020.107904 ↗
24. Effect of microbially induced calcite precipitation treatment on the bonding properties of steel fiber in ultra-high performance concrete10.1016/j.jobe.2022.104132 ↗
25. Effect of nano-SiO2 on fiber–matrix bond in ultra-high-performance concrete as partial substitution of silica flour10.1016/j.cemconcomp.2023.104957 ↗
26. Multiscale investigation on tensile properties of ultra-high performance concrete with silane coupling agent modified steel fibers10.1016/j.cemconcomp.2020.103638 ↗
27. Surface modification of steel fibers using chemical solutions and their pullout behaviors from ultra-high-performance concrete10.1016/j.jobe.2020.101709 ↗
28. Combined chelating and corrosion effects of steel fiber on the interfacial bond and tensile behaviors of ultra-high-performance concrete10.1016/j.cemconcomp.2022.104505 ↗
29. Corrosion of partially and fully debonded steel fibers from ultra-high-performance concrete and its influence on pullout resistance10.1016/j.cemconcomp.2021.104269 ↗
30. Performance of deformed steel fibers embedded in ultra-high performance concrete subjected to various pullout rates10.1016/j.cemconres.2016.07.013 ↗
31. A new perspective on nature of fire-induced spalling in concrete10.1016/j.conbuildmat.2018.06.204 ↗
32. Ultra-High performance concrete (UHPC) with polypropylene (Pp) and steel Fibres: Investigation on the high temperature behaviour10.1016/j.conbuildmat.2021.124608 ↗
33. On the mechanism of prevention of explosive spalling in ultra-high performance concrete with polymer fibers10.1016/j.cemconres.2018.08.012 ↗
34. Fire resistance of ultra-high performance concrete columns subjected to axial and eccentric loading10.1016/j.engstruct.2021.113158 ↗
35. Effect of temperature on the bond behaviour of GFRP bars in concrete10.1016/j.compositesb.2019.107602 ↗
36. Modelling of bond behavior of deformed bar embedded in concrete after heating to high temperatures: A mesoscale study10.1016/j.conbuildmat.2022.127456 ↗
37. Characterizing and analyzing the residual interfacial behavior of steel fibers embedded into cement-based matrices after exposure to high temperatures10.1016/j.compositesb.2020.107933 ↗
38. Steel fibers pull-out after exposure to high temperatures and its contribution to the residual mechanical behavior of high strength concrete10.1016/j.conbuildmat.2017.12.129 ↗
39. A temperature dependent constitutive model for hybrid fibre reinforced concrete10.1016/j.conbuildmat.2022.130109 ↗
40. Fire performance of ultra-high performance concrete: effect of fine aggregate size and fibers10.1007/s43452-022-00430-8 ↗
41. A review of mechanical properties of fibre reinforced concrete at elevated temperatures10.1016/j.cemconres.2020.106117 ↗
42. Spalling resistance and mechanical properties of strain-hardening ultra-high performance concrete at elevated temperature10.1016/j.conbuildmat.2020.120961 ↗
43. Flexural behavior of ultra-high performance hybrid fiber reinforced concrete at the ambient and elevated temperature10.1016/j.conbuildmat.2020.118487 ↗
44. Effect of spatial distribution of polymer fibers on preventing spalling of UHPC at high temperatures10.1016/j.cemconres.2020.106281 ↗
45. Effect of polymer fibers on pore pressure development and explosive spalling of ultra-high performance concrete at elevated temperature10.1007/s43452-022-00520-7 ↗
46. Fire-induced spalling of ultra-high performance concrete: A systematic critical review10.1016/j.conbuildmat.2023.130869 ↗
47. Properties and improvement of ultra-high performance concrete with coarse aggregates and polypropylene fibers after high-temperature damage10.1016/j.conbuildmat.2022.129925 ↗
48. Combined effect of flax fibers and steel fibers on spalling resistance of ultra-high performance concrete at high temperature10.1016/j.cemconcomp.2021.104067 ↗
49. Multi-scale investigation of microstructure, fiber pullout behavior, and mechanical properties of ultra-high performance concrete with nano-CaCO3 particles10.1016/j.cemconcomp.2017.11.014 ↗
50. Effect of natural fibers on thermal spalling resistance of ultra-high performance concrete10.1016/j.cemconcomp.2020.103512 ↗
51. Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature10.1016/j.matdes.2012.05.026 ↗
52. On the explosive spalling behavior of ultra-high performance concrete with and without coarse aggregate exposed to high temperature10.1016/j.conbuildmat.2019.07.299 ↗
53. Development of ultra-high performance concrete with high fire resistance10.1016/j.conbuildmat.2018.05.241 ↗
54. Bond-slip behaviour of steel fibres in concrete after exposure to elevated temperatures10.1016/j.conbuildmat.2017.02.148 ↗
55. An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers10.1016/j.conbuildmat.2019.02.058 ↗