journal article·2023-09-05Open access

Electromagnetic Property Modulation of Flaky Ferromagnetic 304 Stainless-Steel Powders for Microwave Absorption at Elevated Temperatures

Bolin Yang, Yifan Xu, Zhihong Chen, Hang Yang, Yuchen Hu, Haoqin Wu, Mingfeng Xing, Jianguo Guan, Wei Li

Magnetochemistry· Volume 9· Issue 9

Abstract

Soft magnetic metallic absorbents suffer from severe oxidation, reduction in permeability and deterioration in microwave absorption when exposed to high temperatures. In this study, we prepared flaky 304 stainless-steel powders as new microwave absorbents via deformation-induced ferromagnetism. The 304 stainless-steel powders showed significant increases in saturation magnetization (Ms) from 1.03 to 82.46 emu/g when their shape was changed from spheroids to flakes; the Ms further increased to 92.29 emu/g after heat treatment at 500 °C in air. The permeability of 304 alloy powders also showed an obvious increase after ball milling and remained roughly stable after heat treatment at 500 °C in air. Moreover, the permittivity exhibited a sharp decrease after heat treatment, enabling the improvement of impedance matching and microwave absorption. After heat treatment at 500 °C in air for 100 h, the simulated reflection loss of 304 stainless-steel powders with wax still showed attractive levels, giving a minimum value of −22 dB and remaining below −6 dB over 8.5–16.5 GHz at a thickness of 2 mm. Our work can help to include paramagnetic alloy systems as new microwave absorbents for working in harsh environments.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Aluminum Alloys Composites Properties · Advanced Antenna and Metasurface Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China

School of Materials and Microelectronics, Wuhan University of Technology, Wuhan 430070, China

School of Science, Wuhan University of Technology, Wuhan 430070, China

Leicester International Institute, Dalian University of Technology, Dalian 116024, China

State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, China

Funding

National Natural Science Foundation of China · Aeronautical Science Foundation of China

References (66)

Show source-provided references
1. Research Status and Outlook of High Temperature Radar Absorbing Materials
2. Reduced graphene oxides: Light-weight and high-efficiency electromagnetic interference shielding at elevated temperatures10.1002/adma.201400108 ↗
3. Research progress of ceramic matrix composites for high temperature stealth technology based on multi-scale collaborative design10.1016/j.jmrt.2022.03.164 ↗
4. A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles10.1063/1.3688435 ↗
5. Recent progress in SiC nanowires as electromagnetic microwaves absorbing materials10.1016/j.jallcom.2019.152388 ↗
6. Principles, design, structure and properties of ceramics for microwave absorption or transmission at high-temperatures10.1080/09506608.2021.1941716 ↗
7. Recent progresses of high-temperature microwave-absorbing materials10.1142/S1793292018300050 ↗
8. Carbonyl iron powders as absorption material for microwave interference shielding: A review10.1016/j.jallcom.2020.157251 ↗
9. High-temperature microwave absorption and evolutionary behavior of multiwalled carbon nanotube nanocomposite10.1016/j.scriptamat.2009.03.048 ↗
10. Research progress of graphene-based microwave absorbing materials in the last decade10.1557/jmr.2017.80 ↗
11. Enhancement of low-frequency magnetic permeability and absorption by texturing flaky carbonyl iron particles10.1016/j.jallcom.2020.153827 ↗
12. Techniques to enhance magnetic permeability in microwave absorbing materials10.1016/j.apmt.2020.100596 ↗
13. Thermal stability of nanocrystalline Fe-Cr alloys with Zr additions10.1016/j.msea.2012.07.045 ↗
14. First-principles prediction of high Curie temperature for ferromagnetic bcc-Co and bcc-FeCo alloys and its relevance to tunneling magnetoresistance10.1063/1.2710181 ↗
15. Microstructures, absorption and adhesion evolution of FeCoCr/silicone resin coatings at elevated temperature10.3389/fmats.2023.1168418 ↗
16. Fu, Z.W., Chen, Z.H., Wang, R., Xiao, H.Y., Wang, J., Yang, H., Shi, Y.T., Li, W., and Guan, J.G. (2022). Deformation-Thermal Co-Induced Ferromagnetism of Austenite Nanocrystalline FeCoCr Powders for Strong Microwave Absorption. Nanomaterials, 12.10.3390/nano12132263 ↗
17. High-temperature magnetic behavior of FeCo-based nanocrystalline alloys10.1103/PhysRevB.66.012401 ↗
18. Microwave absorption and antioxidation properties of flaky carbonyl iron passivated with carbon dioxide10.1016/j.jmmm.2013.03.038 ↗
19. Enhanced antioxidation and microwave absorbing properties of SiO2-coated flaky carbonyl iron particles10.1016/j.jmmm.2017.09.022 ↗
20. A comparative study on the microwave absorption properties of core-single-shell, core-double-shell and yolk-shell CIP/ceramic composite microparticles10.1016/j.jmmm.2021.168959 ↗
21. The enhancement of the oxidation resistance of carbonyl iron by polyaniline coating and consequent changes in electromagnetic properties10.1016/j.polymdegradstab.2008.07.008 ↗
22. Chemically bonded iron carbonyl for magnetic composites based on phthalonitrile polymers10.1002/pi.2963 ↗
23. Enhanced microwave absorption of Fe nanoflakes after coating with SiO2 nanoshell10.1088/0957-4484/21/9/095708 ↗
24. Plasma-induced FeSiAl@ Al2O3@ SiO2 core–shell structure for exceptional microwave absorption and anti-oxidation at high temperature10.1016/j.cej.2019.123371 ↗
25. Complex Permittivity and Microwave-Absorbing Properties of Fe/Al2O3 Coatings by Air Plasma Spraying Technique10.1111/ijac.12028 ↗
26. Enhanced microwave absorbing properties and heat resistance of carbonyl iron by electroless plating Co10.1016/j.jmmm.2015.05.090 ↗
27. Electroless plating preparation and microwave electromagnetic properties of Ni-coated carbonyl iron particle/epoxy coatings10.1016/j.physb.2010.05.050 ↗
28. SAXS characterization of polymer-embedded hollow nanoparticles and of their shell porosity10.1107/S0021889813025132 ↗
29. Characterizing Size and Porosity of Hollow Nanoparticles: SAXS, SANS, TEM, DLS, and Adsorption Isotherms Compared10.1021/la302236u ↗
30. High temperature oxidation behavior of FeCo-based nanocrystalline alloys10.1002/maco.200603990 ↗
31. Fabrication and oxidation resistance of nanocrystalline Fe10Cr alloy10.1007/s10853-010-4665-3 ↗
32. The oxidation of nanocrystalline Ni3Al fabricated by mechanical alloying and spark plasma sintering10.1016/j.intermet.2007.07.003 ↗
33. Nova, K., Novak, P., Prusa, F., Kopecek, J., and Cech, J. (2019). Synthesis of Intermetallics in Fe-Al-Si System by Mechanical Alloying. Metals, 9.10.3390/met9010020 ↗
34. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
35. Electromagnetic and microwave absorption properties of magnetic stainless steel powder in 2–18 GHz10.1063/1.3693764 ↗
36. Tensile and Impact Properties of Shielded Metal Arc Welded AISI 409M Ferritic Stainless Steel Joints
37. Comparative study of high temperature oxidation behaviour in AISI 304 and AISI 439 stainless steels10.1590/S1516-14392003000200012 ↗
38. Characterization of Fe potentials with respect to the stability of the bcc and fcc phase10.1088/0965-0393/16/3/035005 ↗
39. Transformation-induced plasticity (TRIP) in advanced steels: A review10.1016/j.msea.2020.140023 ↗
40. Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction10.1016/j.scriptamat.2004.03.011 ↗
41. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part II. Microstructural study10.1007/BF02644428 ↗
42. Microstructural evolution of 304 stainless steel during mechanical milling10.1016/0921-5093(96)10412-3 ↗
43. Solidification progress and heat transfer analysis of gas-atomized alloy droplets during spray forming10.1016/0956-7151(94)90421-9 ↗
44. Suo, Q.T., Xu, B.C., Wang, J.J., and Huang, B.Y. (2018, January 20–21). Effect of High Energy Ball Milling on Electromagnetic Properties of FeNi Absorbing Materials. Proceedings of the 2nd International Conference on Advances in Materials, Machinery, Electronics (AMME), Xi’an, China.10.1063/1.5033578 ↗
45. Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering10.1016/j.matchar.2014.11.030 ↗
46. Influence of different deformation on microstructure and properties of 304 austenitic stainless steel10.4028/www.scientific.net/AMR.500.690 ↗
47. Processing of advanced materials using high-energy mechanical milling10.1016/S0079-6425(03)00034-3 ↗
48. Effects of milling time and temperature on phase evolution of AISI(316) stainless steel powder and subsequent sintering10.1016/j.jallcom.2018.06.325 ↗
49. Hydrogen embrittlement of weld metal of austenitic stainless steels10.1016/S0010-938X(02)00011-2 ↗
50. Deformation-induced martensite in austenitic stainless steels: A review10.1007/s43452-020-00130-1 ↗
51. Effect of Ni content on the tensile properties and strain-induced martensite transformation for 304 stainless steel10.1016/j.msea.2010.12.022 ↗
52. Controlled generation of ferromagnetic martensite from paramagnetic austenite in AISI 316L austenitic stainless steel10.1557/JMR.2009.0067 ↗
53. A few details of the austenite to martensite phase transformation in 304 stainless steel powders under mechanical processing10.1016/j.actamat.2010.12.007 ↗
54. Evolution of structure in austenitic steel powders during ball milling and subsequent sintering10.1016/j.jallcom.2006.08.207 ↗
55. A new mechanism for improving electromagnetic properties based on tunable crystallographic structures of FeCoNiSixAl0.4 high entropy alloy powders10.1039/C8RA01762J ↗
56. FeCoNiSixAl0.4 high entropy alloy powders with dual-phase microstructure: Improving microwave absorbing properties via controlling phase transition10.1016/j.jallcom.2019.03.152 ↗
57. Magnetic properties of martensite-austenite mixtures in mechanically milled 304 stainless steel10.1016/0304-8853(95)90034-9 ↗
58. Enhanced heat-resistance property of aluminum-coated carbonyl iron particles as microwave absorption materials10.1016/j.jmmm.2020.167681 ↗
59. Antioxidation and electromagnetic properties of Co-coated hollow carbonyl iron particles by electroless plating method10.1007/s10854-016-6160-3 ↗
60. A coherent polycrystal model for the inverse Hall-Petch relation in nanocrystalline materials10.1016/S0965-9773(99)00033-1 ↗
61. A homogenization technique to calculate eddy current losses in soft magnetic composites using a complex magnetic permeability
62. Tunable magnetic and microwave absorption properties of Sm1.5Y0.5Fe17−xSix and their composites10.1016/j.actamat.2017.12.042 ↗
63. The effect of yttrium on the microwave absorbing properties of Fe78Si13B9 alloy powders10.1016/j.cej.2020.124444 ↗
64. AISI 304 steel: Anomalous evolution of martensitic phase following heat treatments at 400 degrees C10.1016/j.msea.2006.02.116 ↗
65. High-temperature dielectric and microwave absorption properties of Si3N4-SiC/SiO2 composite ceramics10.1007/s10853-014-8709-y ↗
66. Flower-like carbonyl iron powder modified by nanoflakes: Preparation and microwave absorption properties10.1063/1.4919064 ↗