Efficient Fabrication of Quartz Glass Using Laser Coaxial Powder-Fed Additive Manufacturing Approach
Source abstract
Abstract
This article investigates a laser-directed energy deposition additive manufacturing (AM) method, based on coaxial powder feeding, for preparing quartz glass. Through synergistic optimization of line deposition and plane deposition experiments, key parameters of laser coaxial powder feeding AM were identified. The corresponding mechanical properties, thermal properties, and microstructure of the bulk parts were analyzed. The maximum mechanical strength of the obtained quartz glass element reached 72.36 ± 5.98 MPa, which is ca. 95% that of quartz glass prepared by traditional methods. The thermal properties of the obtained quartz glass element were also close to those prepared by traditional methods. The present research indicates that one can use laser AM technology that is based on coaxial powder feeding to form quartz glass with high density and good thermodynamic properties. Such quartz glass has substantial potential in, for example, optics and biomedicine.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu, P.R. China.
University of Chinese Academy of Sciences, Beijing, P.R. China.
References (35)
Show source-provided references
1. 10.1016/j.jmatprotec.2014.07.01110.1016/j.jmatprotec.2014.07.011 ↗
2. 10.1089/3dp.2018.015710.1089/3dp.2018.0157 ↗
3. 10.1089/3dp.2015.002110.1089/3dp.2015.0021 ↗
4. 10.5937/fmet1604393S10.5937/fmet1604393S ↗
5. Gmeiner R, , Deisinger U, , Schoenherr J, et al. Additive manufacturing of bioactive glasses and silicate bioceramics. J Ceram Sci Technol, 2015; 6(2):75–86; doi:10.4416/jcst2015-00001
6. 10.1007/s13534-020-00177-210.1007/s13534-020-00177-2 ↗
7. 10.3390/mi1102017410.3390/mi11020174 ↗
8. 10.1016/j.cirp.2018.04.09610.1016/j.cirp.2018.04.096 ↗
9. 10.1016/j.cja.2020.09.02010.1016/j.cja.2020.09.020 ↗
10. 10.1111/jace.1644010.1111/jace.16440 ↗
11. 10.1109/JPROC.2016.261649410.1109/JPROC.2016.2616494 ↗
12. 10.1109/JPROC.2016.262014810.1109/JPROC.2016.2620148 ↗
13. 10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
14. 10.1016/j.msea.2021.14103410.1016/j.msea.2021.141034 ↗
15. 10.1016/j.pmatsci.2020.10073610.1016/j.pmatsci.2020.100736 ↗
16. 10.1016/j.matpr.2021.02.39610.1016/j.matpr.2021.02.396 ↗
17. Bertolino M, , Battegazzore D, , Arrigo R, et al. Designing 3D printable polypropylene: Material and process optimisation through rheology. Addit Manuf, 2021; 40(3):101944; doi:10.1016/j.addma.2021.101944
18. 10.1016/j.matpr.2021.02.27610.1016/j.matpr.2021.02.276 ↗
19. 10.1016/j.phpro.2014.08.11810.1016/j.phpro.2014.08.118 ↗
20. 10.1115/1.402853110.1115/1.4028531 ↗
21. Luo J, , Gilbert LJ, , Bristow DA, et al. Additive manufacturing of glass for optical applications. SPIE, 2016; 9738:97380Y-1-9; doi: 10.1117/12.2218137
22. 10.1115/1.403518210.1115/1.4035182 ↗
23. 10.1016/j.addma.2017.03.00610.1016/j.addma.2017.03.006 ↗
24. 10.1039/C8RA06706F10.1039/C8RA06706F ↗
25. 10.1039/C8RA02428F10.1039/C8RA02428F ↗
26. 10.1021/acsami.8b0376610.1021/acsami.8b03766 ↗
27. 10.1021/acsami.6b1617410.1021/acsami.6b16174 ↗
28. 10.1038/nature2206110.1038/nature22061 ↗
29. 10.1364/OME.9.00230710.1364/OME.9.002307 ↗
30. 10.1016/j.procir.2018.08.10910.1016/j.procir.2018.08.109 ↗
31. 10.1117/12.257720510.1117/12.2577205 ↗
32. 10.1016/j.jmapro.2020.09.00810.1016/j.jmapro.2020.09.008 ↗
33. 10.1016/j.powtec.2018.09.03210.1016/j.powtec.2018.09.032 ↗
34. 10.1016/j.procir.2020.02.28610.1016/j.procir.2020.02.286 ↗
35. 10.1016/j.optlastec.2018.08.01510.1016/j.optlastec.2018.08.015 ↗