journal article·2021-08-14Open access

Phase Formation, Microstructure and Permeability of Fe-Deficient Ni-Cu-Zn Ferrites, (I): Effect of Sintering Temperature

Christoph Priese, Jörg Töpfer

Magnetochemistry· Volume 7· Issue 8

Abstract

We have studied the densification, phase formation, microstructure, and permeability of stoichiometric and Fe-deficient Ni-Cu-Zn ferrites of composition Ni0.30Cu0.20Zn0.50+zFe2-zO4-(z/2) with 0 ≤ z ≤ 0.06 sintered at temperatures from 900 °C to 1150 °C. The shrinkage is shifted from 1000 °C for z = 0 towards lower temperatures and reaches its maximum rate at 900 °C for z = 0.02. Stoichiometric ferrites show regular growth of single-phase ferrite grains if sintered at Ts ≤ 1100 °C. Sintering at 1150 °C leads to the formation of a small amount of Cu2O, triggering exaggerated grain growth. Fe-deficient compositions (z > 0) form Cu-poor stoichiometric ferrites coexisting with a minority CuO phase after sintering at 900–1000 °C. At Ts ≥ 1050 °C, CuO transforms into Cu2O, and exaggerated grain growth is observed. The formation of Cu oxide second phases is investigated using XRD, SEM, and EDX. The permeability of the ferrites increases with sintering temperature up to a maximum permeability of µ = 230 for z = 0 or µ = 580 for z = 0.02, respectively, at Ts = 1000 °C. At higher sintering temperatures, the permeability decreases, which is due to the formation of a microstructure with intra-crystalline porosity in large grains, and a non-magnetic Cu oxide grain boundary phase.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Magnetic Properties and Applications · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dept. SciTec., Ernst-Abbe-Hochschule Jena, 07745 Jena, Germany

Funding

Deutsche Forschungsgemeinschaft

References (28)

Show source-provided references
1. Goldman, A. (1999). Handbook of Modern Ferromagnetic Materials, Kluwer Academic Publishers. [1st ed.].10.1007/978-1-4615-4917-8 ↗
2. Nomura, T., and Nakano, A. (October, January 29). New evolution of ferrite for multilayer chip components. Proceedings of the Sixth International Conference on Ferrites, Tokyo, Japan.
3. Multilayer Chip Inductors
4. Progress in materials and processes of multilayer power inductors10.1007/s10854-020-04188-8 ↗
5. Ni-Cu-Zn Ferrites for low temperature firing: II. Effects of powder morphology and Bi2O3 addition on microstructure and permeability10.1007/s10832-006-6362-9 ↗
6. Bi2O3 addition effects on the sintering mechanisms, magnetic properties and DC superposition behavior of NiCuZn ferrites10.1111/ijac.12308 ↗
7. Correlation between microstructure and permeability stability of ferrite materials10.1016/j.ceramint.2017.10.196 ↗
8. Comparison of magnetic properties of low-temperature fired NiCuZn ferrites under low- and high-Bi2O3 doping modes10.1007/s11664-020-08047-4 ↗
9. The development and analysis of property-composition diagrams on gel-derived stoichiometric NiCuZn ferrite10.1016/S0304-8853(02)00482-1 ↗
10. Ni-Cu-Zn Ferrites for low temperature firing: I. Ferrite compositions and its effects on sintering behavior and permeability10.1007/s10832-005-3278-8 ↗
11. Effects on iron deficiency on magnetic properties of (Ni0.76Zn0.24)O(Fe2O3)0.575 ferrite10.1016/S0304-8853(00)00408-X ↗
12. Effects of composition and sintering temperature on properties of NiZn and NiCuZn ferrites10.1016/j.jmmm.2006.07.022 ↗
13. Influence of Fe-deficiency on electromagnetic properties of low-temperature fired NiCuZn ferrites10.1016/j.jmmm.2009.12.029 ↗
14. Low temperature sintering of sub-stoichiometric Ni-Cu-Zn ferrites: Shrinkage, microstructure and permeability10.1016/j.jmmm.2011.08.040 ↗
15. Copper-rich phase segregation effects on the magnetic properties and DC-bias-superpositions characteristics of NiCuZn ferrites10.1016/j.jmmm.2014.08.077 ↗
16. Microstructural phenomena controlling losses in NiCuZn ferrites as studied by transmission electron microscopy
17. Phase formation, grain growth and magnetic properties of NiCuZn ferrites10.1016/j.jmmm.2010.11.071 ↗
18. ZnO and CuO crystal precipitation in sintering Cu-doped Ni-Zn ferrites. I. Influence of dry relative density and cooling rate10.1016/j.jeurceramsoc.2011.05.007 ↗
19. ZnO and CuO crystal precipitation in sintering Cu-doped Ni-Zn ferrites. II. Influence of sintering temperature and sintering time10.1016/j.jeurceramsoc.2016.07.033 ↗
20. Fabrication and unravelling the impact of iron-deficiency amount on crystal structure, micromorphology, elastic and electromagnetic properties of Ni0.25Cu0.13Zn0.62Fe2-xO4-3x/2 ferrites under different sintering conditions10.1007/s10854-020-05200-x ↗
21. Structural and room-temperature ferromagnetic properties of Fe-doped CuO nanocrystals10.1063/1.3436573 ↗
22. X-ray structural studies on solubility of Fe substituted CuO10.1039/C6RA22255B ↗
23. Smit, J., and Wijn, J. (1962). Ferrite, Philips Technische Bibliothek.
24. The System Copper: Cupric Oxide: Oxygen10.1021/ja01438a009 ↗
25. Effects of microstructure on permeability and power loss characteristics of the NiZn ferrites10.1016/j.jmmm.2007.07.005 ↗
26. Influence of microstructure on permeability dispersion and power loss of NiZn ferrite10.1063/1.2908202 ↗
27. A coherent model for the complex permeability in polycrystalline ferrites10.1109/20.104592 ↗
28. Average grain size in polycrystalline ceramics10.1111/j.1151-2916.1969.tb11975.x ↗