journal article·2019-09-19Open access

Deposition of Selective Catalytic Reduction Coating on Wire-Mesh Structure by Atmospheric Plasma Spraying

Xiaoyu Ma, Yunlong Ma, Hui Li, Yingliang Tian

Materials· Volume 12· Issue 18

Abstract

A series of catalytic coatings consisting of MnOx-CeO2 and TiO2 support were prepared by atmospheric plasma spraying, which was aimed at the application of selective catalytic reduction (SCR) of NOx. The effect of the load of active component on the coating was firstly studied. The results showed that all the coating presented the highest catalytic activity at approximately 350 °C and the coating with the composition of 20MnOx/5CeO2/TiO2 (wt%) achieved the most powerful performance. The coating was then prepared on a wire-mesh structure substrate, which can be easily assembled as a gas filter. The results showed that the specific surface area was greatly increased resulting in the significant improvement of the catalytic activity of the coating. This strategy offered a promising possibility of removing NOx and particulate fliting simultaneously in industrial applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · High-Temperature Coating Behaviors · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China

Funding

National Natural Science Foundation of China

References (30)

Show source-provided references
1. Selective catalytic reduction of NOx emitted by nitric acid plants10.1016/0920-5861(89)85051-5 ↗
2. Chromia on titania: IV. Nature of active sites for selective catalytic reduction of NO by NH310.1006/jcat.1994.1093 ↗
3. Chemical and mechanistic aspects of the selective catalytic reduction of NO by ammonia over oxide catalysts: A review10.1016/S0926-3373(98)00040-X ↗
4. Kinetics of Selective Catalytic Reduction of Nitric Oxide by Ammonia over Vanadia/Titania10.1006/jcat.1996.0342 ↗
5. High-temperature and high-concentration SCR of NO with NH3: Application in a CCS process for removal of carbon dioxide10.1016/j.cej.2012.03.006 ↗
6. The effect of metal oxide additives on the activity of V2O5/TiO2 catalysts for the selective catalytic reduction of nitric oxide by ammonia10.1016/S0926-3373(98)00101-5 ↗
7. ChemInform Abstract: The Effects of Structure on the Catalytic Activity and Selectivity of V2O5/TiO2 for the Reduction of NO by NH3
8. Surface characterization studies of TiO2 supported manganese oxide catalysts for low temperature SCR of NO with NH310.1016/j.apcatb.2007.05.010 ↗
9. Low-Temperature Selective Catalytic Reduction (SCR) of NO with NH3 by Using Mn, Cr, and Cu Oxides Supported on Hombikat TiO210.1002/1521-3773(20010702)40:13<2479::AID-ANIE2479>3.0.CO;2-7 ↗
10. Performance and kinetics study for low-temperature SCR of NO with NH3 over MnOx–CeO2 catalyst10.1016/S0021-9517(03)00081-2 ↗
11. Identification of Surface Species on Titania-Supported Manganese, Chromium, and Copper Oxide Low-Temperature SCR Catalysts10.1021/jp0313122 ↗
12. The effect of different slurry compositions and solvents upon the properties of ZSM5-washcoated cordierite honeycombs for the SCR of NOx with methane10.1016/j.cattod.2005.07.066 ↗
13. Catalytic fibers and cloths10.1016/S0926-860X(01)00963-2 ↗
14. Preparation of catalyst carriers on the basis of alumina supported on metallic gauzes10.1016/S0926-860X(99)00563-3 ↗
15. Development of a stacked wire-mesh structure for diesel soot combustion10.1016/j.cej.2014.02.086 ↗
16. Filtration Efficiency and Pressure Drop of Miniature Diesel Particulate Filters10.1080/02786826.2012.763087 ↗
17. Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications10.1016/j.ceramint.2014.06.017 ↗
18. Photocatalytic decomposition of benzene with plasma sprayed TiO2-based coatings on foamed aluminum10.1016/j.jeurceramsoc.2005.04.024 ↗
19. Structure and performance of γ-alumina washcoat deposited by plasma spraying10.1016/S0257-8972(01)01301-9 ↗
20. Role of Spray Drying of Nanoagglomerates in Morphology Evolution in Nanostructured APS Coatings10.1111/j.1551-2916.2007.02090.x ↗
21. Low-temperature selective catalytic reduction of NO with NH3 over iron and manganese oxides supported on titania10.1016/S0926-3373(03)00100-0 ↗
22. High N2 selectivity in selective catalytic reduction of NO with NH3 over Mn/Ti–Zr catalysts10.1039/C8RA00336J ↗
23. Effect of thermal spray processes on anatase–rutile phase transformation in nano-structured TiO2 photo-catalyst coatings10.1179/174329409X446278 ↗
24. AIR PLASMA SPRAYED CATALYTIC COATINGS FOR DENOX APPLICATIONS10.1002/9781119040293.ch10 ↗
25. TiO2-supported metal oxide catalysts for low-temperature selective catalytic reduction of NO with NH3I. Evaluation and characterization of first row transition metals10.1016/j.jcat.2003.09.003 ↗
26. MnOx/CeO2–TiO2 mixed oxide catalysts for the selective catalytic reduction of NO with NH3 at low temperature10.1016/j.cej.2012.05.009 ↗
27. Manganese oxide-based catalysts for low-temperature selective catalytic reduction of NO x with NH3: A review10.1016/j.apcata.2016.04.023 ↗
28. Activity and selectivity of pure manganese oxides in the selective catalytic reduction of nitric oxide with ammonia10.1016/0926-3373(93)E0034-9 ↗
29. Modelling catalytic combustion of carbon monoxide and hydrocarbons over catalytically active wire meshes10.1016/S1385-8947(99)00029-7 ↗
30. Design strategies for scr catalysts with improved N2 selectivity: The significance of nano-confining effects by titanate nanotubes10.1039/C6EN00627B ↗