journal article·2020-12-11Open access

Changes in the Compressive Strength of Concrete in Thin Horizontally Formed Slabs

Jacek Szpetulski, Bohdan Stawiski

Materials· Volume 13· Issue 24

Abstract

During compaction of a concrete mix, when thin slabs are formed in a horizontal position, the components of this mix become segregated. Heavy components fall to the bottom, and light components (air and water) move to the top. This process may suggest that the upper layers of concrete elements formed in a horizontal position may have lower compressive strength than the remaining part of the element. This problem is recognized and documented in many publications, but there was a publication whose test results indicate a lack of variability in the compressive strength of concrete across the thickness of tested elements. The discrepancies appearing in the evaluation of concrete homogeneity was the reason for conducting destructive tests of the compressive strength of concrete across the thickness of horizontally concreted test elements that imitate thin slabs. The obtained results of the destructive compressive strength confirmed previous results regarding the heterogeneity of concrete. They clearly indicate that there is a differentiation of the compressive strength of concrete across the thickness of a thin element, which remained in a liquefied state for a certain time during its formation. The longer the duration of this state across the entire thickness of the formed element, the greater the differentiation of the compressive strength between the top and bottom layers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Civil Engineering, Mechanics and Petrochemistry, Warsaw University of Technology, 09-400 Płock, Poland

Faculty of Environmental Engineering and Geodesy, Wroclaw University of Environmental and Life Sciences, 50-363 Wrocław, Poland

References (29)

Show source-provided references
1. Michałek, J. (2019). Variation in compressive strength of concrete across thickness of placed layer. Materials, 12.10.3390/ma12132162 ↗
2. Should standard cube test specimens be replaced by test specimens taken from structures?
3. (2007). Assessment of In-Situ Compressive Strength in Structures and Pre-Cast Concrete Components. EN 13791, European Committee for Standardization.
4. Non-destructive strength characterization of concrete using surface waves10.1016/S0963-8695(99)00028-6 ↗
5. Kania, T., and Stawiski, B. (2012, January 7–9). Effect of manufacturing technology on quality of slabs made of regular concrete. Proceedings of the conference People, Buildings and Environment, Lednice, Czech Republic.
6. Radzik, Ł., and Stawiski, B. (2017, January 12–16). Need to identify parameters of concrete in the weakest zone of the industrial floor. Proceedings of the World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium—WMCAUS, Prague, Czech Republic.10.1088/1757-899X/245/2/022063 ↗
7. Construction of exponential ultrasonic converters and examples of their use in testing concrete
8. Stawiski, B. (1999, January 6–9). Testing no-homogeneity of concrete and mortar on the thickness of the floor slab and industrial floors. Proceedings of the Praca Naukowa Instytutu Budownictwa Politechniki Wrocławskiej, XI Konferencja OKTRA, Polonica Zdrój, Poland.
9. Testing of concrete quality on thickness floor
10. Stawiski, B. (2009). Ultrasonic Testing Concrete and Mortar with Using Point Heads, Oficyna Wydawnicza Politechniki Wrocławskiej.
11. Stawiski, B. (, 2012). Assessment of concrete compressive strength in monolithic slabs. Proceedings of the Warsztaty Pracy Rzeczoznawcy Budowlanego, XII Konferencja Nauk.-Tech, Kielce, Poland.
12. The heterogeneity of mechanical properties of concrete in formed constructions horizontally10.1016/j.acme.2012.03.006 ↗
13. Gradients of concrete compressive strength in industrial floors
14. Stawiski, B., and Kania, T. (2019). Examining the distribution of strength across the thickness of reinforced concrete elements subject to sulphate corrosion using the ultrasonic method. Materials, 12.10.3390/ma12162519 ↗
15. Stawiski, B., and Kania, T. (2020). Tests of concrete strength across the thickness of industrial floor using the ultrasonic method with exponential spot heads. Materials, 13.10.3390/ma13092118 ↗
16. Testing the compressive strength of concrete in the construction
17. (2019). Testing Concrete in Structures. Cored Specimens. Taking, Examining and Testing in Compression. EN 12504-1, European Committee for Standardization.
18. Brunarski, L. (1994). Research Methods Used in the Assessment of Building Structures-Estimation of Concrete Compressive Strength in Situ, Diagnostyka i wzmacnianie konstrukcji żelbetowych.
19. Czarnecki, L. (2004). Concrete According to PN-EN 206-1-Commentary, Polish Cement.
20. Drobiec, Ł., Jasiński, R., and Piekarczyk, A. (2010). Diagnostics of Reinforced Concrete Structures. Methodology, Field Tests, Laboratory Tests of Concrete and Steel, Wydawnictwo Naukowe PWN.
21. Uncertainty of measurement results of concrete compressive strength tests of core samples
22. Testing Hardened Concrete (2019). Compressive Strength of Test Specimens. EN 12390-3, European Committee for Standardization.
23. (2012). Testing Hardened Concrete. Shape, Dimensions and Other Requirements for Specimens and Moulds. EN 12390-1, European Committee for Standardization.
24. (2016). Concrete. Specification, Performance, Production and Conformity. EN 206, European Committee for Standardization.
25. (2019). Testing Fresh Concrete. Flow Table Test. EN 12350-5, European Committee for Standardization.
26. (2019). Testing Fresh concrete. Slump Test. EN 12350-2, European Committee for Standardization.
27. (2000). Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders. ASTM C 1231/C1231M-00, ASTM International.
28. Comparative study on compressive strength of concrete with new sand-cap and neoprene pad10.4334/IJCSM.2008.2.1.015 ↗
29. Safety formats for non-linear finite element analysis of reinforced concrete structures: Discussion, comparison and proposals10.1016/j.engstruct.2019.05.029 ↗