Cyclic Behavior of Low Rise Concrete Shear Walls Containing Recycled Coarse and Fine Aggregates
Source abstract
Abstract
In this study, the cyclic behaviors of low rise concrete shear walls using recycled coarse or fine aggregates were investigated. Eight low rise Recycled Aggregates Concrete (RAC) shear wall specimens were designed and tested under a cyclic loading. The following parameters were varied: replacement percentages of recycled coarse or fine aggregates, reinforcement ratio, axial force ratio and X-shaped rebars brace. The failure characteristics, hysteretic behavior, strength and deformation capacity, strain characteristics and stiffness were studied. Test results showed that the using of the Recycled Coarse Aggregates (RCA) and its replacement ratio had almost no influence on the mechanical behavior of the shear wall; however, the using of Recycled Fine Aggregates (RFA) had a certain influence on the ductility of the shear wall. When the reinforcement ratio increased, the strength and ductility also increased. By increasing the axial force ratio, the strength increased but the ductility decreased significantly. The encased brace had a significant effect on enhancing the RAC shear walls. The experimental maximum strengths were evaluated with existing design codes, it was indicated that the strength evaluation of the low rise RAC shear walls can follow the existing design codes of the conventional concrete shear walls.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Geotechnical Engineering and Soil Stabilization · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China
Faculty of Civil Engineering and Geosciences, Delft University of Technology, 2628 CN Delft, The Netherlands
Funding
National Natural Science Foundation of China
References (35)
Show source-provided references
1. Mechanical properties of concrete produced with recycled coarse aggregates—Influence of the use of superplasticizers10.1016/j.conbuildmat.2013.03.011 ↗
2. An overview of study on recycled aggregate concrete in China (1996–2011)10.1016/j.conbuildmat.2011.12.074 ↗
3. Superplasticizer’s efficiency on the mechanical properties of recycled aggregates concrete: Influence of recycled aggregates composition and incorporation ratio10.1016/j.conbuildmat.2017.07.103 ↗
4. Performance of recycled aggregate concrete monitored by durability indexes10.1016/S0008-8846(01)00653-6 ↗
5. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
6. Experimental analysis of properties of high performance recycled aggregate concrete10.1016/j.conbuildmat.2013.11.054 ↗
7. Mechanical properties of recycled aggregate concrete under uniaxial loading10.1016/j.cemconres.2004.09.020 ↗
8. Properties of recycled aggregate concrete with different water control methods10.1016/j.conbuildmat.2017.05.134 ↗
9. Enhancing the durability properties of concrete prepared with coarse recycled aggregate10.1016/j.conbuildmat.2012.02.032 ↗
10. Durability-related performance of concrete containing fine recycled aggregates from crushed bricks and sanitary ware10.1016/j.matdes.2015.11.023 ↗
11. The influence of recycled concrete aggregates on the behavior of beam–column joints under cyclic loading10.1016/j.engstruct.2013.12.024 ↗
12. Shake-table model tests on recycled aggregate concrete frame structure
13. An experimental study on flexural strength of reinforced concrete beams with 100% recycled concrete aggregates10.1016/j.engstruct.2015.01.043 ↗
14. Shear strength of recycled concrete beams10.1016/j.conbuildmat.2005.12.018 ↗
15. Shear strength of longitudinally reinforced recycled aggregate concrete beams10.1016/j.engstruct.2017.05.028 ↗
16. Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm10.1016/j.conbuildmat.2015.06.055 ↗
17. Mechanical properties and durability of mortar containing fine fraction of demolition wastes produced by selective demolition in South Italy10.1016/j.compositesb.2016.10.045 ↗
18. Life cycle assessment of recycled concretes: A case study in southern Italy10.1016/j.scitotenv.2017.09.107 ↗
19. Behavior of reinforced concrete structural walls: Strength, deformation characteristics and failure mechanism
20. Cyclic load behavior of low slenderness reinforced concrete walls: Design basis and test results
21. Web crushing of reinforced concrete structural walls
22. Seismic behavior of squat reinforced concrete shear walls10.1193/1.1490353 ↗
23. Effects of axial load on seismic performance of reinforced concrete walls with short shear span10.1016/j.engstruct.2017.08.030 ↗
24. Strength and drift capacity of squat recycled concrete shear walls under cyclic loading10.1016/j.engstruct.2015.06.025 ↗
25. Pseudo-static Experiment Study on Recycled Concrete High Shear Walls10.4028/www.scientific.net/KEM.517.577 ↗
26. China Ministry of Construction (CMC) (2010). Code for Recycled Coarse Aggregate for Concrete (GB/T 25177-2010), (In Chinese).
27. China Ministry of Construction (CMC) (2010). Code for Recycled Fine Aggregate and Mortar for Concrete (GB/T 25176-2010), (In Chinese).
28. China Ministry of Construction (CMC) (2002). Standard for Test Method of Mechanical Properties on Ordinary Concrete (GB/T 50081-2002), (In Chinese).
29. China Ministry of Construction (CMC) (2010). Code for Design of Concrete Structures (GB 50010-2010), (In Chinese).
30. China Ministry of Construction (CMC) (2012). Test Methods of Steel for Reinforcement of Concrete (GB/T 28900-2012), (In Chinese).
31. China Ministry of Construction (CMC) (2011). Technical Specification for Concrete Structures of Tall Building (JGJ 3-2011), (In Chinese).
32. China Ministry of Construction (CMC) (1997). Specification of Testing Methods for Earthquake Resistant Building (JGJ. 101-96), (In Chinese).
33. Evaluation of ductility of structures and structural assemblages from laboratory testing
34. American Concrete Institute (2014). Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14), American Concrete Institute.
35. European Committee for Standardization (CEN) (2004). European Committee for Standardization (CEN) (2004) “Design of Structures for Earthquake Resistance, Part 1: General Rules, Seismic Actions and Rules for Buildings” Eurocode 8, BSI British Standards.