Experimental characterization of smart cementitious composites reinforced with multi-walled carbon nanotubes for the health monitoring of infrastructures
Source abstract
Abstract
The development of smart cementitious composites reinforced with Multi-Walled Carbon Nanotubes (MWCNTs) for Structural Health Monitoring (SHM) applications still represents a significant challenge, mainly due to difficulties associated with achieving stable and homogeneous nanotube dispersion within cementitious matrices. In this study, MWCNT-reinforced cement paste composites containing different nanotube concentrations (0.00–1.50 wt%) were produced through ultrasonication treatment combined with the use of a commercially available naphthalene-based superplasticizer as dispersing agent. The additive, commonly used to improve the workability of cementitious materials, was also exploited here for the dispersion of MWCNTs, thereby assuming a dual functional role. The influence of MWCNT incorporation on the mechanical, electrical, piezoresistive and microstructural behavior of the composites was experimentally investigated. The results show that the MWCNT-based cementitious composites exhibit a pronounced piezoresistive response strongly dependent on nanotube concentration. Under cyclic loading conditions, the composite containing 0.40 wt% MWCNTs exhibited the highest sensing performance, reaching a gauge factor of 310 together with good linearity (22.97%), repeatability (14.57%) and hysteresis (29.11%), exceeding values commonly reported in recent literature for cementitious composites incorporating conventional dispersing agents. SEM analyses highlighted the formation of more homogeneous and interconnected conductive regions for MWCNT contents between 0.40 and 0.75 wt%, while TG-DTG and XRD analyses confirmed that MWCNT incorporation did not significantly alter the main thermal decomposition mechanisms or phase composition of the cementitious matrix. The experimental results were also compared with the predictions of a micromechanical model accounting for MWCNT agglomeration, segregation, curvature and electron transport mechanisms, showing good agreement with the observed experimental trends. The results obtained provide useful insights into the correlation between nanotube dispersion, conductive network evolution and piezoresistive response, contributing to the design and optimization of high-performance self-sensing cementitious sensors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. Self-healing cement concrete composites for resilient infrastructures: a review10.1016/j.compositesb.2020.107892 ↗
2. Developments and applications of carbon nanotube reinforced cement-based composites as functional building materials10.3389/fmats.2022.861646 ↗
3. Research progress on carbon-based materials for aerospace applications10.1016/j.compositesb.2025.113105 ↗
4. Advancements in fiber-reinforced polymer composite materials damage detection methods: towards achieving energy-efficient SHM systems10.1016/j.compositesb.2021.109136 ↗
5. Multifunctional asphalt concrete pavement toward smart transport infrastructure: design, performance and perspective10.1016/j.compositesb.2023.110937 ↗
6. Measurement of existing prestressing force in concrete structures through an embedded vibrating beam strain gauge10.1016/j.measurement.2016.01.031 ↗
7. Structural Health Monitoring by Accelerometric Data of a Continuously Monitored Structure with Induced Damages
8. Strain monitoring in composite-strengthened concrete structures using optical fibre sensors10.1016/S1359-8368(00)00044-5 ↗
9. Health monitoring and active control of composite structures using piezoceramic patches10.1016/S1359-8368(99)00034-7 ↗
10. Yarn-based smart cement composite for self-sensing and energy harvesting in civil infrastructure10.1016/j.compositesb.2025.113270 ↗
11. The effect of high temperature, freeze-thaw cycles, and chloride attack on the smart properties of CNTs modified cement-based composites10.1016/j.conbuildmat.2025.145098 ↗
12. Temperature and humidity influence on the strain sensing performance of hybrid carbon nanotubes and graphite cement composites10.1016/j.conbuildmat.2021.122786 ↗
13. Influence of nanomaterials on mechanical performance and microstructure of cement paste10.1016/j.conbuildmat.2026.145146 ↗
14. Piezoresistivity and mechanical properties of self-sensing CNT cementitious nanocomposites: Optimizing the effects of CNT dispersion and surfactants10.1016/j.conbuildmat.2022.128127 ↗
15. Electro-mechanical investigations of steel fiber reinforced self-sensing cement composite and their implications for real-time structural health monitoring
16. Development of smart engineered cementitious composites with integrated self-sensing capability and enhanced tensile ductility10.1016/j.conbuildmat.2026.145931 ↗
17. Investigation of self-sensing and interfacial properties of CNT-grown basalt fiber reinforced composites under low-temperature CVD conditions10.1016/j.compositesb.2025.113060 ↗
18. Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete10.1016/j.conbuildmat.2018.07.071 ↗
19. Effect of CNT and CNF loading and count on the corrosion resistance, conductivity and mechanical properties of nanomodified OPC mortars10.1016/j.conbuildmat.2017.04.112 ↗
20. Investigations on scalable fabrication procedures for self-sensing carbon nanotube cement-matrix composites for SHM applications10.1016/j.cemconcomp.2015.11.001 ↗
21. Piezoresistive properties of well-dispersed carbon nanotubes (CNTs) modified cement paste
22. Research progress on CNTs/CNFs-modified cement-based composites – A review10.1016/j.conbuildmat.2019.01.024 ↗
23. Effect of carbon nanotubes on compressive, flexural and tensile strengths of Portland cement-based materials: a systematic literature review10.1016/j.conbuildmat.2020.120237 ↗
24. A carbon nanotube/cement composite with piezoresistive properties10.1088/0964-1726/18/5/055010 ↗
25. Dispersion of multi-walled carbon nanotubes into white cement mortars: the effect of concentration and surfactants10.3390/nano12061031 ↗
26. Revisiting the effects of carbon nanotube agglomerates in cement10.1016/j.carbon.2024.119710 ↗
27. Multifunctional and smart carbon nanotube reinforced cement-based materials
28. Carbon nanotube cement-based transducers for dynamic sensing of strain10.1016/j.cemconcomp.2012.12.013 ↗
29. 6 - Smart cement paste with carbon nanotubes
30. Carbon nanotube–cement composites: a retrospect10.1080/19373260.2011.615474 ↗
31. Performance of cement-based sensors with CNT for strain sensing10.1680/adcr.14.00120 ↗
32. Micromechanical modeling of the piezoelectric behavior of CNT cement-matrix composites10.1016/j.compositesb.2025.112810 ↗
33. Electromechanical modelling of a new class of nanocomposite cement-based sensors for structural health monitoring10.1177/1475921714560071 ↗
34. Strain and damage sensing properties on multifunctional cement composites with CNF admixture10.1016/j.cemconcomp.2013.11.009 ↗
35. Conductivity of carbon fiber reinforced cement-based composites10.1016/S0958-9465(02)00138-5 ↗
36. Double percolation in the electrical conduction in carbon fiber reinforced cement-based materials10.1016/j.carbon.2006.09.031 ↗
37. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
38. Dispersion of multiwalled carbon nanotubes (MWCNTs) by ionic liquid-based Gemini pyrrolidinium surfactants in aqueous solution10.1007/s00396-011-2500-2 ↗
39. Production of aqueous colloidal dispersions of carbon nanotubes10.1016/S0021-9797(02)00176-5 ↗
40. Modeling the mechanical properties of cementitious materials containing CNTs10.1016/j.cemconcomp.2019.103347 ↗
41. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review10.1016/j.compositesa.2010.07.003 ↗
42. Effect of carbon nanofiber dispersion on the tensile properties of epoxy nanocomposites10.1177/0021998311401076 ↗
43. Ultrasonic production of nano-size dispersions and emulsions
44. Quantitative study of the dispersion degree in carbon nanofiber/polymer and carbon nanotube/polymer nanocomposites10.1016/j.matlet.2008.03.010 ↗
45. On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes10.1016/j.conbuildmat.2018.02.146 ↗
46. Carbon nanotube reinforced cementitious composites: an overview10.1016/j.compositesa.2016.10.020 ↗
47. Distribution of carbon nanofibers and nanotubes in cementitious composites10.3141/2142-13 ↗
48. Mechanical Properties and Durability of Ultra High Strength Concrete Incorporating Multi-Walled Carbon Nanotubes10.3390/ma9060419 ↗
49. Mechano-Physical Properties and Microstructure of Carbon Nanotube Reinforced Cement Paste after Thermal Load10.3390/nano7090267 ↗
50. Performance of Carbon Nanofiber-Cement Composites with a High-Range Water Reducer10.3141/2142-16 ↗
51. Influence of super plasticizer and Ca(OH)2 on the stability of functionalized multi-walled carbon nanotubes dispersions for cement composites applications10.1016/j.conbuildmat.2013.05.100 ↗
52. Effective medium electrical response model of carbon nanotubes cement-based composites10.1016/j.conbuildmat.2022.128293 ↗
53. Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites10.1016/j.compstruct.2017.11.011 ↗
54. Reinforcing Effect of Carbon Nanotubes/Surfactant Dispersions in Portland Cement Pastes
55. Fabrication of Piezoresistive CNT/CNF Cementitious Composites with Superplasticizer as Dispersant10.1061/(ASCE)MT.1943-5533.0000435 ↗
56. Dispersion of Carbon Nanotubes with Different Types of Superplasticizer as a Dispersing Agent for Self-Sensing Cementitious Materials10.3390/app11188452 ↗
57. Naphthalene-Sulfonate-Based Super-Plasticizer and Ultra-Sonication Effects on the Dispersion of CNT in Cement Composites Subjected to Cyclic Loading10.21884/IJMTER.2018.5136.OMKKB ↗
58. Self-sensing ultra-high performance concrete for in-situ monitoring10.1016/j.sna.2021.113049 ↗
59. Preparation of cement modified by multi-walled carbon nanotubes and investigation of its piezoelectric property10.1016/j.aej.2023.09.028 ↗
60. The role of electronic and ionic conduction in the electrical conductivity of carbon fiber reinforced cement10.1016/j.carbon.2006.03.013 ↗
61. Strain monitoring of concrete components using embedded carbon nanofibers/epoxy sensors10.1016/j.conbuildmat.2018.07.147 ↗
62. Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement-matrix composites for SHM applications10.1016/j.compstruct.2016.12.014 ↗
63. "The Effect of Nanotube Waviness and Agglomeration on the Elastic Property of Carbon Nanotube-Reinforced Composites10.1115/1.1751182 ↗
64. An analytical model of effective electrical conductivity of carbon nanotube composites10.1063/1.2857468 ↗
65. Modeling and characterization of the electrical conductivity of carbon nanotube-based polymer composites10.1016/j.polymer.2011.06.046 ↗
66. Micromechanics modeling of the electrical conductivity of carbon nanotube cement-matrix composites10.1016/j.compositesb.2016.10.025 ↗
67. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT) e polymer nanocomposites10.1016/j.compositesa.2012.12.008 ↗
68. Micromechanics modeling of the uniaxial strain-sensing property of carbon nanotube cement- matrix composites for SHM applications10.1016/j.compstruct.2016.12.014 ↗
69. Mora, P. Verma, S. Kumar,Electrical conductivity of CNT/polymer composites: 3D printing, measurements and modeling,
70. Composites Part B: Engineering, Volume 183, 2020, 107600, ISSN 1359-8368, https://doi.org/10.1016/j.compositesb.2019.107600.10.1016/j.compositesb.2019.107600 ↗
71. Influence of carbon nanotube on properties of concrete: A review10.1016/j.conbuildmat.2023.130388 ↗
72. Modeling of conductivity in carbon fiber-reinforced cement-based composite10.1007/s10853-010-4396-5 ↗
73. Improved strain sensing properties of cement-based sensors through enhanced carbon nanotube dispersion10.1016/j.cemconcomp.2020.103842 ↗
74. Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement10.1016/j.cemconres.2003.09.003 ↗
75. Electrical conductivity of self-monitoring CFRC10.1016/j.cemconcomp.2004.09.001 ↗
76. Static and dynamic strain monitoring of reinforced concrete components through embedded carbon nanotube cement-based sensors10.1155/2017/3648403 ↗
77. An Experimental Study on Static and Dynamic Strain Sensitivity of Embeddable Smart Concrete Sensors Doped with Carbon Nanotubes for SHM of Large Structures10.3390/s18030831 ↗