Combined Effect of Carbon Dioxide, Hydrogen Sulfide, and Acetic Acid on Bottom-of-the-Line Corrosion
Source abstract
Abstract
Abstract This research work presents a study of the combined influence of the partial pressure of hydrogen sulfide (H2S) and the concentration of free acetic acid (CH3COOH) on the general and localized carbon dioxide (CO2) corrosion at the bottom of the line. Experiments were carried out for up to 21 days in three 4-in (101.6-mm) internal diameter flow loops at 70°C with 2 bars of CO2. The flow regime was stratified for all of the experiments. It was found that trace amounts of H2S (from 0.004 bar to 0.13 bar) greatly retards the CO2 corrosion with general corrosion rates usually 10 to 100 times lower than their pure CO2 equivalent. However, the most protective conditions were observed at the lowest partial pressure of H2S, while corrosion increased when more H2S was added. The presence of a mackinawite film on the coupon surface seems to be the origin of this protectiveness. When 1,000 ppm of free acetic acid was added to the system, the general corrosion rate doubled compared with a baseline CO2 environment and by between one and two orders of magnitude compared to baseline H2S/CO2 mixtures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals · Offshore Engineering and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. “Modeling of CO2 Corrosion of Mild Steel at High Pressures of CO2 and in the Presence of Acetic Acid,”
2. “Prediction of CO2 Corrosion of Carbon Steel,”
3. “The Role of Acetate in CO2 Corrosion: The Double Whammy,”
4. “The Role of Acetate in CO2 Corrosion of Carbon Steel: Has the Chemistry Been Forgotten?,”
5. “The Effect of Cl− and Acetic Acid on Localized CO2 Corrosion in Wet Gas Flow,”
6. “Electrochemical Investigation and Modeling of Carbon Dioxide Corrosion on Carbon Steel in the Presence of Acetic Acid,”
7. Nes̆ić · Corrosion · 1996 · 52 · 28010.5006/1.3293640 ↗
8. Nordsveen · Corrosion · 2003 · 59 · 44310.5006/1.3277576 ↗
9. “Role of Free Acetic Acid on the CO2 Corrosion of Steel,”
10. “The Importance of FeCO3 Supersaturation on the CO2 Corrosion of Carbon Steel,”
11. Nes̆ić · Corrosion · 2003 · 59 · 61610.5006/1.3277592 ↗
12. “Iron Carbonate Film Scale Formation and CO2 Corrosion in the Presence of Acetic Acid,”
13. “Kinetics of Iron Carbonate and Iron Sulfide Scale Formation in CO2/H2S Corrosion”
14. Greenberg · Appl. Geochem · 1992 · 7 · 18510.1016/0883-2927(92)90036-3 ↗
15. Silva · J. Solution Chem · 2002 · 31 · 9710.1023/A:1015275618138 ↗
16. “Weight-Loss Corrosion with H2S: Using Past Operations for Designing Future Facilities,”
17. “Corrosion of Carbon Steel by H2S in CO2-Containing Environments,”
18. Sun · Ind. Eng. Chem. Res · 2008 · 47 · 173810.1021/ie070750i ↗
19. Rickard · Chem. Rev · 2007 · 107 · 51410.1021/cr0503658 ↗
20. Vera · J. Electrochem. Soc · 1986 · 133
21. Suleimenov · Geochim. Cosmochim. Acta · 1994 · 58 · 243310.1016/0016-7037(94)90022-1 ↗
22. Suleimenov · Geochim. Cosmochim. Acta · 1997 · 61 · 518710.1016/S0016-7037(97)00291-3 ↗
23. Benning · Chem. Geol · 2000 · 167 · 2510.1016/S0009-2541(99)00198-9 ↗
24. “The Effect of Small Amounts of H2S on CO2 Corrosion of Carbon Steel,”
25. “The Influence of Small Amounts of H2S on CO2 Corrosion of Iron and Carbon Steel,”
26. “Corrosion in Multiphase Flow Containing Small Amounts of H2S,”
27. “CO2 Corrosion in Presence of Trace Amounts of H2S,”
28. Sun · Corrosion · 2009 · 65 · 29110.5006/1.3319134 ↗
29. “Improvements on de Waard Milliams Corrosion Prediction and Applications to Corrosion Management,”
30. “Prediction of Corrosion in Slightly Sour Environments,”
31. “CO2 Top-of-the-Line Corrosion in Presence of H2S”
32. “Top-of-the-Line Corrosion in Presence of Acetic Acid and Carbon Dioxide,”
33. “Effect of Acetic Acid, pH, and MEG on the CO2 Top-of-the-Line Corrosion,”
34. “Effect of Oxygen on CO2 Corrosion of Mild Steel”
35. “Solmineq 88: A Computer Program for Geochemical Modeling of Water Rock Interactions”
36. “Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens”
37. B. Craig , Practical Oilfield Metallurgy and Corrosion, 2nd ed. Metcorr (Tulsa, OK: PennWell Books, 1993), p. 14.
38. “Influence of a Layer of Un-dissolved Cementite on the Rate of the CO2 Corrosion of Carbon Steel,”
39. Crolet · Corrosion · 1998 · 54 · 19410.5006/1.3284844 ↗