journal article·1999-04-01

Effects of the Valence of Sulfur on Passivation of Alloys 600, 690, and 800 at 25°C and 95°C

Z. Fang, R.W. Staehle

Corrosion· Volume 55· Issue 4
Publisher page

Abstract

Effects of the valence of sulfur, as sulfur oxyanions and sulfide (S2– or HS–), on passivation of alloys 600, 690, and 800 (UNS N06600, N06690, and N08800) in various heat treatments were studied at 25°C and 95°C using potentiodynamic polarization. Effects of scanning rate, sulfur valence, pH, alloy composition, and heat treatment were investigated. In general, stability of passive films was found to decrease with the decrease of sulfur valence from +6 to –2. Alloy 690 in the thermally treated condition tended to be more stable than the various heat treatments of alloys 600 and 800, with some exceptions. Examination of surfaces after polarization over the potential range showed intergranular corrosion occurred mainly in solutions of sulfate (SO42−), sulfite (SO32−), tetrathionate (S4O62−), and thiosulfate (S2O32−); whereas S2– or HS– produced pitting. The increase of S2O32− concentration at pH 6 and 95°C accelerated anodic dissolution. Variation of pH from 3.5 to 8 in 10–2 M S2O32− solutions did not change the anodic current density significantly. Reduction of S2O32− and S4O62− to species of lower valence was observed. The transient instability of protective films was assessed using a stress corrosion cracking (SCC) parameter (PSCC) that incorporates the ratio of current densities obtained in fast and slow potentiodynamic scans. The relationship of PSCC to the possible occurrence of SCC was discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

*Corrosion Research Center, Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455

References (32)

Show source-provided references
1. Evaluation of SCC Test Methods for Inconel 600 in Low-Temperature Aqueous Solutions
2. Newman · Corrosion · 1983 · 39 · 38610.5006/1.3593877 ↗
3. Bandy · Corrosion · 1983 · 39 · 99510.1016/0010-938X(83)90026-4 ↗
4. Bandy · Corros. Sci. · 1983 · 23 · 99510.1016/0010-938X(83)90026-4 ↗
5. Bandy · Corrosion · 1984 · 40 · 28110.5006/1.3581954 ↗
6. Trabanelli · Metall. Ital. · 1983 · 12 · 791
7. Stress Corrosion Cracking of Controlled-Purity Inconel 600-Type Alloys in Sulfur-Containing Solutions
8. Was · Metall. T-A · 1987 · 18A · 1,31310.1007/BF02647201 ↗
9. Electrochemical and Stress Corrosion Cracking Behavior of Inconel 600 Alloy in Thiosulfate Solution
10. Stress Corrosion Cracking and Anodic Dissolution of Alloy 600 in Low-Concentration Thiosulfate
11. Tsai · Corros. Sci. · 1996 · 38 · 3310.1016/0010-938X(96)00097-2 ↗
12. Effect of Sulfur on the Protective Layers on Alloys 600 and 690 in Low-and High-Temperature Environments
13. Macdonald · Corros. Sci. · 1978 · 18 · 41110.1016/S0010-938X(78)80037-7 ↗
14. Oudar · Appl. Surf. Sci. · 1979 · 3 · 4810.1016/0378-5963(79)90060-6 ↗
15. Effect of Reduced Sulfur on High-Temperature Aqueous Corrosion for Alloy 600
16. Stress Corrosion Cracking of the Fe-Cr-Ni Alloy System
17. Parkins · Corrosion · 1982 · 38 · 24510.5006/1.3577346 ↗
18. Conceptual Understanding and Life Prediction for SCC of Pipelines
19. Parkins · Corrosion · 1996 · 52 · 36310.5006/1.3292124 ↗
20. Berge · Nucl. Technol. · 1981 · 55 · 8810.13182/NT81-A32833 ↗
21. Theory and Application of Straining Electrode
22. Predictions and Experimental Verification of the Slip-Dissolution Model for Stress Corrosion Cracking of Low-Strength Alloys
23. Mechanical Rupture of Protective Films on Iron-Based Alloys in Aqueous Environments
24. Influence of Oxide Films on Stress Corrosion Cracking of Carbon Steels
25. IGA Behavior and Mechanism in Nickel-Based Alloys
26. Development and Application of Corrosion Mode Diagrams
27. Staehle · 1989 · 561
28. Woodward · Corrosion · 1984 · 40 · 64010.5006/1.3593900 ↗
29. Tsai · Corros. Sci. · 1993 · 34 · 74110.1016/0010-938X(93)90097-Z ↗
30. Review of IGA, IGSCC, and Wastage of Alloys 600 and 690 in High-Temperature Acidified Solutions
31. Pourbaix · 1974 · 545
32. Local Chemistry and Formation of Deposits on the Secondary Side of Steam Generators — A Laboratory Study