On The Determination of Polarization Diagrams of Reinforcing Steel in Concrete
Source abstract
Abstract
Polarization (E-log i) diagrams of steel in concrete are often drawn from measurements obtained while using a current interruption or “instant-off” technique, in an attempt to eliminate error from ohmic resistance effects. A finite-difference computer model of a reinforced concrete system was used to predict the shape of polarization curves that would result when corrosion macrocells, involving active and passive reinforcing steel regions, are present. The results show that apparent polarization (Tafel) slopes, several times greater than the actual values, could be observed as a result of nonuniform current distribution effects. The calculations also showed that considerable distortion of the E-log i diagram could result from the current distribution effects and from redistribution of the oxygen concentration within the concrete during the polarization test. Implications of the results on the validity of commonly used cathodic polarization criteria were examined.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Structural Health Monitoring Techniques · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
*Dept. of Civil Engineering and Mechanics, University of South Florida, Tampa, FL 33620.
References (28)
Show source-provided references
1. Corrosion of Metals in Association with Concrete10.1520/STP818-EB ↗
2. Alonso · ACI Materials Journal · 1990 · 87 · 130
3. Schiessl · 1988
4. Potential Mapping and Corrosion of Steel in Concrete
5. Macrocell Corrosion of Reinforcement in Marine Structures
6. Electrochemical Impedance of Corrosion Macrocells on Reinforcing Steel in Concrete
7. Cathodic Protection of Concrete Highway Bridges
8. Depolarization Testing of Cathodically Protected Reinforcing Steel in Concrete
9. Funahashi · Corrosion · 1991 · 47 · 37610.5006/1.3585268 ↗
10. Berkeley · 1990
11. Influence of Electrolyte Resistance on Electrochemical Measurements and Procedures to Minimize or Compensate for Resistance Errors10.1520/STP25279S ↗
12. IR Drop in Electrochemical Corrosion Studies-Part I: Basic Concepts and Estimates of Possible Measurement Errors10.1520/STP25280S ↗
13. Theoretical Problems Related to Ohmic Resistance Compensation10.1520/STP25281S ↗
14. Techniques for AC Impedance Measurement in Corrosion Systems
15. Schell · Materials Performance · 1985 · 24 · 18
16. Munn · Corrosion · 1991 · 47 · 61210.5006/1.3585299 ↗
17. Munn · Corrosion · 1991 · 47 · 61810.5006/1.3585300 ↗
18. Concrete Inspection: Interpretation of Potential and Resistivity Measurements
19. Cherry · Corrosion · 1986 · 42 · 65410.5006/1.3583037 ↗
20. Computation of Corrosion Macrocell Distribution and Electrochemical Impedance of Reinforcing Steel in Concrete
21. Calculation of Extended Counter Electrode Polarization Effects on the Electrochemical Impedance Response of Steel in Concrete10.1520/STP18080S ↗
22. Kaesche · 1985
23. Feliu · Corrosion Science · 1989 · 29 · 10510.1016/0010-938X(89)90083-8 ↗
24. Macdonald · Corrosion · 1991 · 47 · 33010.5006/1.3585261 ↗
25. Impedance Measurements in Electrochemical Systems10.1007/978-1-4615-7458-3_2 ↗
26. Shewmon · 1963
27. I. Lasa, R. Powers, R. Kessler, “Impressed Current Cathodic Protection Using Titanium Mesh Cast Into Structural Concrete”, Report FL-DOT-SMO-89-369 (Gainesville, FL: Florida Dept. of Transportation, 1989).
28. Electrochemical Chloride Removal from Concrete: A SHRP Contract Status Report