journal article·1957-06-01

Some Case Histories of Stress Corrosion Cracking Of Austenitic Stainless Steels Associated With Chlorides

H. R. Copson, C. F. Cheng

Corrosion· Volume 13· Issue 6
Publisher page

Abstract

Some 22 case histories of stress corrosion cracking in Types 302, 304, 316, 321, and 347 stainless steels are presented. These occurred in water, steam, brines, and miscellaneous solutions. In each case, either the chloride content was high initially, or conditions were such that chlorides could concentrate. Usually the temperature was quite hot. Often the environment was acid and in most cases it seemed likely that air was present. Microexamination always revealed transcrystalline cracks which usually had a characteristic branching growth. In each case it was concluded that internal tensile stresses in combination with concentrated chlorides caused the cracking. Some means of avoiding cracking are pointed out. Following the case histories the results of some laboratory tests are presented which show that resistance to cracking increases with nickel content, and that large additions of nickel bring about a major improvement. Inconel, which is at the high nickel end of this series of alloys is considered immune to this type of stress corrosion cracking. 3.5.8
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Stress Corrosion Cracking of the Austenitic Chromium-Nickel Steels and Its Industrial Implications
2. First Report on Stress Corrosion Cracking of Stainless Steel in Chloride Solutions
3. Studies on Stress Corrosion Cracking of Austenitic Stainless Steels, Types 347 and 316
4. Some Observations on Stress-Corrosion Cracking in Austenitic-Stainless Alloys10.1520/STP42585S ↗
5. The Susceptibility of Austenitic-Stainless Steels to Stress-Corrosion Cracking10.1520/STP42586S ↗
6. An Attempt to Select a Suitable Specimen for the Study of Corrosion Cracking in 18-8 Steel
7. Stress Corrosion Cracking of Stainless Steels
8. Transgranular Stress Corrosion in Chromium- Nickel Stainless Steel
9. The Stress Corrosion Cracking of Austenitic Stainless Steels. Part I. —Mechanism of Process in Hot Magnesium-Chloride Solutions
10. Dummett · 1948 · 477
11. Stress Corrosion of Stainless Steel
12. Spannungskorrosionsercheineingen bei Eisenlegierungen
13. Some Examples of Stress Corrosion Cracking of Austenitic Stainless Steel10.1520/STP42587S ↗
14. Davis · 1945 · 429
15. Stress-Corrosion in a Stainless Steel Compressor
16. Effect of Design, Fabrication, and Installation on the Performance of Stainless Steel Equipment10.5006/0010-9312-11.1.27 ↗
17. The Phenomena of Stress Corrosion Cracking in Austenitic Stainless Steels
18. Stress Corrosion of Austenitic Stainless Steels in High Temperature Water10.1111/j.1559-3584.1956.tb03996.x ↗
19. Stress Corrosion Cracking Test10.5006/0010-9312-12.7.19 ↗
20. Stress-Corrosion Cracking of Type 304 Austenitic Stainless Steel
21. Laboratory Techniques for the Investigation of Stress Corrosion Cracking
22. Lincoln · 1954 · 172
23. Copson · 1948 · 571
24. The Influence of Corrosion in the Cracking of Pressure Vessels
25. Zur Spannungskorrosion Austenitischer Stahle
26. Die Spannungskorrosion Austenitischer Stahle
27. Physical Metallurgy of Austenitic Stainless Steels
28. Discussion