journal article·2001-04-01

Applications of Electrochemical Methods for Investigations of Localized Corrosion of Nitrogen-Molybdenum Stainless Steels

J.H. Russell, B.S. Covino, S.J. Bullard

Corrosion· Volume 57· Issue 4
Publisher page

Abstract

Electrochemical methods were used to determine the localized corrosion resistance of 12 austenitic stainless steels (SS) with a composition range of 22%Cr-5%Ni-5%Mn-(1% to 5%)Mo-(0.0% to 0.7%)N-balance Fe in a deaerated 3.5 wt% sodium chloride (NaCl) solution from 10°C to 97°C. Potentiodynamic polarization was used to determine the critical pitting potential (CPP), protection potentials, and polarization resistance (Rp), and potentiostatic cyclic thermometry was used to determine the critical pitting temperature (CPT) and critical crevice temperature (CCT). The results of potentiodynamic polarization showed that all of the SS containing both N and Mo have CPP significantly higher than either Type 304 (UNS S30400) or Type 316L (UNS S31603) SS. Rp correlated with the pitting resistance equivalent (PRE) for PRE from 20 to 45; however, for PRE > 45 there was no correlation. Results obtained by potentiostatic cyclic thermometry showed that CPT and the CCT are both linear functions of PRE, and strongly dependent on both Mo and N concentration in the alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

*U.S. Department of Energy Albany Research Center, 1450 Queen Ave., SW, Albany, OR 97321.

References (23)

Show source-provided references
1. Janik-Czachor · Corrosion · 1975 · 31 · 39410.5006/0010-9312-31.11.394 ↗
2. Pawel · Corrosion · 1989 · 45 · 12510.5006/1.3577829 ↗
3. Bandy · Corrosion · 1985 · 41 · 22810.5006/1.3581995 ↗
4. Hartline · Metall. Trans. · 1974 · 5 · 2,27110.1007/BF02644006 ↗
5. Levey · Corrosion · 1995 · 51 · 91110.5006/1.3293567 ↗
6. Szklarska-Smialowska · 1986 · 157
7. Vanini · P. Marcus, Corros. Sci · 1994 · 36 · 1,82510.1016/0010-938X(94)90021-3 ↗
8. Truman · Brit. Corros. J. · 1977 · 12 · 23610.1179/000705977798318973 ↗
9. Passivity Mechanisms in Stainless Steels: Mo-N Synergism
10. Mechanism of Passivation in Stainless Steels Containing High Concentrations of Nitrogen
11. Steensland · Corros. Prev. Control · 1968 · 15 · 25
12. Determining the Potential Independent Critical Pitting Temperature (CPT) by a Potentiostatic Method Using the Avesta Cell
13. Brigham · Corrosion · 1974 · 30 · 16110.5006/0010-9312-30.5.161 ↗
14. Speidel · MP · 1992 · 31 · 59
15. Pralit · Corrosion · 1993 · 49 · 97710.5006/1.3316025 ↗
16. Slavens · High Temp.—High Press. · 1994 · 26 · 123
17. ASTM Standard D 1193, Specification for Reagent Water
18. Pitting Corrosion of Stainless Steels in Acidic Environment
19. Rogne · MP · 1987 · 26 · 29
20. High Nitrogen Corrosion Resistant Austentic Stainless Steels Made by Hot Isostatic Compaction of Gas Atomized Powder
21. Blom · MP · 1983 · 22 · 52
22. Steinsmo · Corrosion · 1997 · 53 · 2610.5006/1.3280430 ↗
23. Localized Corrosion Resistance of High-Alloy Stainless Steels and Welds