Effect of filler material on the microwave joining of SS-430 steel
Source abstract
Abstract
In this research paper, the ferritic stainless steel (SS)-430 was butt-joined using nickel (Ni) and austenitic stainless steel (SS-316 L) as interface powder materials. The trials were conducted using a home microwave device that ran at 2.45 GHz and 1000 W. The fabricated weldments demonstrated metallurgical bonding of the SS-430 faying surfaces with the Ni and SS-316 L-based filler materials. The presence of various carbide phases in the joint region of both Ni and SS-316 L-based filler materials was discovered using XRD investigation. The formation of various carbides particle was significantly high in case of joint formed with Ni-based filler materials as compared to the SS-316 L-based filler materials. Microhardness of the joint zone was reported as 310 ± 25 HV and 290 ± 11 HV for weldment obtained with Ni and SS-316 L-based filler materials. The tensile strength of weldment fabricated with SS-316 L-based filler materials (416.70 MPa) is significantly high as compared to weldment fabricated with Ni-based filler materials (318.70 MPa). This was because of the presence of relatively harder carbide particles present in the joint of Ni-based filler materials, which significantly reduces the ductility and tensile strength of the fabricated weldment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Engineering Department, Punjabi University, Patiala, India
Mechanical Engineering, IK Gujral Punjab Technical University Jalandhar, Kapurthala, India
Funding
Science and Engineering Research Board
References (23)
Show source-provided references
1. 10.1108/jedt.08-2020-032210.1108/jedt.08-2020-0322 ↗
2. 10.1080/10426914.2017.129195710.1080/10426914.2017.1291957 ↗
3. 10.1080/10426914.2017.131779810.1080/10426914.2017.1317798 ↗
4. 10.1007/s11661-021-06509-w10.1007/s11661-021-06509-w ↗
5. 10.1080/10426914.2018.153258110.1080/10426914.2018.1532581 ↗
6. 10.1080/10426914.2017.131779310.1080/10426914.2017.1317793 ↗
7. 10.1080/10426914.2014.95202810.1080/10426914.2014.952028 ↗
8. 10.1016/0924-0136(94)01701-210.1016/0924-0136(94)01701-2 ↗
9. 10.1177/002199832094961710.1177/0021998320949617 ↗
10. 10.1016/j.matpr.2020.11.99710.1016/j.matpr.2020.11.997 ↗
11. 10.1177/204129751039345110.1177/2041297510393451 ↗
12. 10.1177/146442071558920610.1177/1464420715589206 ↗
13. 10.1016/j.jmapro.2011.03.00110.1016/j.jmapro.2011.03.001 ↗
14. 10.1007/s12046-013-0142-410.1007/s12046-013-0142-4 ↗
15. 10.1007/s13632-013-0109-110.1007/s13632-013-0109-1 ↗
16. 10.1080/10426914.2013.76396610.1080/10426914.2013.763966 ↗
17. 10.1016/j.matpr.2015.07.05210.1016/j.matpr.2015.07.052 ↗
18. 10.1016/j.jmapro.2015.02.00210.1016/j.jmapro.2015.02.002 ↗
19. 10.1051/matecconf/2016570300110.1051/matecconf/20165703001 ↗
20. 10.1007/s11665-021-06220-210.1007/s11665-021-06220-2 ↗
21. 10.1177/095440541455869410.1177/0954405414558694 ↗
22. 10.1016/j.surfcoat.2011.05.01810.1016/j.surfcoat.2011.05.018 ↗
23. 10.1016/j.mfglet.2020.08.00210.1016/j.mfglet.2020.08.002 ↗