Machinability and Surface Quality Issues in Finish Turning of Hardened Steel with Coated Carbide and CBN Tools
Source abstract
Abstract
The objective of this article was to investigate the performance of coated carbide and low content cubic boron nitride (CBN-L) tools in finish turning of hardened steel. The tool life, cutting tool temperature, cutting forces, and surface integrity of machined workpiece achieved with both the tools under similar cutting conditions were compared. The effect of variation in cutting conditions on the performance of coated carbide and CBN inserts was also analyzed. With the selected flank wear criterion of VBmax = 200 µm, significant advantage in terms of optimum surface integrity was observed. The performance of coated carbide tools deteriorated at highest cutting speed tested, and significant chipping/breakage of the cutting edge was observed. The tool wear affected the cutting zone temperature, as well as residual stress generated on the machined surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Lahiff C. · Robot and Computer Integrated Manufacturing · 2007 · 23 · 63810.1016/j.rcim.2007.02.008 ↗
2. Dogra M. · International Journal of Precision Engineering and Manufacturing-Springer · 2010 · 11 · 34110.1007/s12541-010-0040-1 ↗
3. More A.S. · Journal of Materials Processing Technology · 2006 · 180 · 25310.1016/j.jmatprotec.2006.06.013 ↗
4. EI-Wardany T.I. · Journal of Manufacturing Science and Engineering · 2000 · 122 · 62010.1115/1.1286367 ↗
5. Zhou J.M. · International Journal of Machine Tools and Manufacture · 2003 · 43 · 30110.1016/S0890-6955(02)00214-6 ↗
6. Sales W.F. · International Journal of Advanced Manufacturing Technology · 2009 · 41 · 66010.1007/s00170-008-1523-4 ↗
7. Tae J.K. · International Journal of Advanced Manufacturing Technology · 1999 · 15 · 47010.1007/s001700050091 ↗
8. Online catalogue of cutting tools, 2010.www.coromant.sandvik.com(accessed March 2011)
9. Lin H.M. · Wear · 2008 · 264 · 67910.1016/j.wear.2007.06.006 ↗
10. Kurniawan D. · Materials and Manufacturing Processes · 2010 · 25 · 37010.1080/10426910903179930 ↗
11. Gaitonde V.N. · Materials and Manufacturing Processes · 2009 · 24 · 137310.1080/10426910902997415 ↗
12. Trent E.M. · 2000
13. International Organization for Standardization.Tool-life Testing with Single Point Turning Tools, ISO 3685–1993 (E); ISO: Geneva, Switzerland.
14. Huang Y. · International Journal of Advanced Manufacturing Technology · 2007 · 35 · 44310.1007/s00170-006-0737-6 ↗
15. Rech J. · International Journal of Machine Tools & Manufacture · 2003 · 43 · 54310.1016/S0890-6955(02)00141-4 ↗
16. Hua J. · Journal of Materials Processing Technology · 2006 · 171 · 18010.1016/j.jmatprotec.2005.06.087 ↗
17. Dogra M. · Materials and Manufacturing Processes · 2012 · 27 · 52310.1080/10426914.2011.593238 ↗
18. Yallese M.A. · Journal of Materials Processing Technology · 2009 · 209 · 109210.1016/j.jmatprotec.2008.03.014 ↗
19. Zhou J.M. · International Journal of Advanced Manufacturing Technology · 2003 · 22 · 69710.1007/s00170-003-1569-2 ↗
20. Abdullah K. · Materials and Design · 2005 · 26 · 35110.1016/j.matdes.2004.06.022 ↗
21. Yiğit K. · Transactions of NAMRI/SME · 2007 · 35 · 1
22. Li Q. · Journal of Materials Processing Technology · 2007 · 191 · 27410.1016/j.jmatprotec.2007.03.022 ↗
23. Shi J. · Materials and Manufacturing Processes · 2010 · 25 · 49510.1080/10426910903180045 ↗
24. Youngsik C. · International Journal of Fatigue · 2010 · 32 · 39010.1016/j.ijfatigue.2009.07.014 ↗
25. Guo Y.B. · Machining Science and Technology · 2009 · 13 · 43710.1080/10910340903454922 ↗