journal article·2004-12-31

A Statistical Model for Determining the Through-Transmission Ultrasonic Amplitude Response for Imperfectly Contacting Interfaces during Thermoplastic Fusion Bonding

Kirk D. Tackitt, John W. Gillespie

Publisher page

Abstract

Abstract The focus of this work is to develop a system model for through-transmission ultrasonics (TTU) as a process monitoring technique for nonintrusive, online control of thermoplastic fusion bonding processes. A closed form model is developed to predict the TTU amplitude of a fusion bond using an ultrasonic wave propagation theory with a model for the evolution of intimate contact at the material interfaces. This new approach treats the attenuation of sensor response due to imperfect contact at the bond interface as a statistical averaging of the transmission coefficients for each of the possible sound paths between source and receiver. The results of experimental and model-based parametric studies show that the intimately contacting path dominates the overall signal behavior. An approximation of the full model for an arbitrary number of interfaces based on these results is derived.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Tackitt, K.D., Don, R.C., Holmes, S.T. and Gillespie, J.W. Jr. 1993. Through-Transmission Ultrasonic Sensing for Process Control of the Fusion Bonding of Thermoplastic Composites. Proc. SPE ANTECH. 1993, New Orleans, LA.
2. Tackitt, K.D., Butler, C.A., Gillespie, J.W. Jr. and McCullough, R.L. Assessment of Through Transmission Ultrasonics for the Detection of Intimate Contact During Fusion Bonding. Proc. SPE ANTECH. Boston, MA. pp.1274–1278.
3. Tackitt, K.D. and Gillespie, J.W. Jr. Through-Transmission Ultrasonics for Process Monitoring of Thermoplastic Fusion Bonding. Proc. of ASC. pp.812–821. Technomic Pub. Co., Inc.
4. 10.1177/08927057880010040210.1177/089270578800100402 ↗
5. 10.1002/pen.76029231410.1002/pen.760292314 ↗
6. Maffezzoli A.M. · SAMPE J. · 1989 · 25 · 35
7. Maguire D.M. · SAMPE J. · 1989 · 25 · 11
8. 10.1016/0263-8223(90)90039-H10.1016/0263-8223(90)90039-H ↗
9. Don R.C. · SAMPE J. · 1990 · 59
10. 10.1002/pen.76032090810.1002/pen.760320908 ↗
11. 10.1177/00219983920260070510.1177/002199839202600705 ↗
12. Wise, R.L. and Watson, M.N. A New Approach for Joining Plastics and Composites to Metals. Proc. SPE ANTECH. Detroit, Michigan. pp.2113–2116.
13. Holmes, S.T., McKnight, S.H., Gillespie, J.W. Jr., Wu, Szu-I.Y. and Schwarz, J. 1993. Large-Scale Bonding of PAS/PS Thermoplastic Components Using Resistance Heating. Proc. SPE ANTECH. 1993, New Orleans, LA.
14. Butler, C.A. Relationship of Process and Properties to the Development of Bonding of Thermoplastic Composites. Master's thesis. Newark: Department of Chemical Engineering, University of Delaware.
15. Gooberman G.L. · 1968
16. Mehl J.B. · 1991
17. Tackitt K.D. · SPE ANTECH. · 1996
18. Dara P.H. · 1985
19. 10.1177/00219983870210110310.1177/002199838702101103 ↗
20. 10.1177/00219983920260160210.1177/002199839202601602 ↗
21. Tackitt, K.D. and Gillespie, J.W. Jr. Through-Transmission Ultrasonics for Process Monitoring of Thermoplastic Fusion Bonding. Proc. of ASC. pp.812–821. Technomic Pub. Co., Inc.
22. Silverman E.M. · SAMPE J. · 1989 · 25 · 34
23. Yoon, T.H. and McGrath, J.E. Adhesion Study of PEEK/Graphite Composites. Proc. 36th Int. SAMPE Symp. pp.428–437.
24. Wu, Szu-I Y. Dual Resin Bonding of Thermoplastic Composites. Proc. of the 36th Int. SAMPE Symp. pp.2174–2183.
25. Bastien, L. Non-Isothermal Model for Fusion Bonding of Thermoplastic Composites Using an Amorphous Film Technique. Master's Thesis, Materials Science Program. Newark: University of Delaware.
26. Chao, M. Non-Isothermal Strength Model Including Healing and Bondline Thickness Effects for Fusion Bonding of Thermoplastic Composites. Master's thesis, Materials Science Program. Newark: University of Delaware.