journal article·2003-01-08

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

M. Shamanian, M. Salehi, A. Saatchi, T. H. North

Publisher page

Abstract

Abstract Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. 10.1016/S0043-1648(96)07454-610.1016/S0043-1648(96)07454-6 ↗
2. 10.1016/0043-1648(91)90249-T10.1016/0043-1648(91)90249-T ↗
3. Salehi M. · Japan Technical Information Service (Japan) · 1992 · 535
4. 10.1016/0043-1648(92)90065-G10.1016/0043-1648(92)90065-G ↗
5. 10.1016/0043-1648(85)90113-910.1016/0043-1648(85)90113-9 ↗
6. Wilson A. · Surface and Coatings Technology · 1993 · 63 · 60010.1016/0257-8972(93)90306-9 ↗
7. Godse R. · Materials Science and Technology · 1988 · 105 · 331
8. Fischmeister H.F. · Materials Science and Technology · 1988 · 105 · 305
9. Maldonado C. · Journal of Materials Science · 1997 · 32 · 473910.1023/A:1018626929844 ↗
10. Coltters R.G. · Materials Science and Engineering · 1985 · 76 · 110.1016/0025-5416(85)90078-3 ↗
11. 1992.Metals Handbook, 10 Vol. 2, 620–621. Metals park, Ohio: ASM.
12. Brooks, K.J.A. 1983.Cemented Carbides for Engineers and Tool Users49–53. UK: International Carbide Data.
13. Kim Y.C. · Trans. Jpn. Weld. Res. Inst. · 1993 · 22 · 121
14. Rabinowicz E. · 1995
15. Johnson, K.L. 1985.Contact Mechanics397–423. Cambridge: Cambridge University Press.10.1017/CBO9781139171731 ↗
16. Dieter, G.E. 1986.Mechanical Metallurgy, 3 348–349. London: McGraw-Hill.
17. Sun D. · Journal of Materials Science and Technology · 2000 · 16 · 59
18. Zhou Y. · Metallurgical Transactions A · 1991 · 22 · 282210.1007/BF02851377 ↗
19. Weimer, A.W. 1997.Carbide, Nitride and Boride Materials, Synthesis and Processing, 1 649–650. London: Chapman and Hall.10.1007/978-94-009-0071-4 ↗
20. Suh, N.P. 1986.Tribophysics264–290. Prentice-Hall: Massachusetts Institute of Technology.
21. Stamos, V., Kostopoulos, V. and Peteves, S.D. Proc. Conf. Interfacial Science in Ceramic Joining. pp.267–278. Slovenia: Bled.
22. Evans A.G. · Materials Science and Engineering · 1990 · 126 · 5310.1016/0921-5093(90)90113-H ↗
23. Hartwig, H. and Kouptsidis, J.S. Proc. Int. Vacuum Cong. and 3rd Conf. on Solid Surfaces. pp.259–262. Vienna: Osterreichsche Sutdeingesellschaft fur Atomenergie.