Effect of Pin Profile on Friction Stir Welded Aluminum Matrix Composites
Source abstract
Abstract
Abstract To clarify the role of pin profile geometry on some properties of friction stir welded of the considered aluminum matrix composites (Al-4 wt% Mg, reinforced with 1 wt% SiC and 1 wt% graphite particles) plates of 8 mm thickness were fabricated by compocasting method then annealed at 400°C for 2 h. Tools with different pin profiles (square, hexagonal, and octagonal) were manufactured to be used for friction stir welding (FSW) of aluminum matrix composites plates at four different levels of welding (transverse) and rotational speeds. The effects of these pin profiles on microstructure and some mechanical properties of the friction stir welded joints were studied. The results show that the plates welded by square head pin have better properties compared to the other pin profiles. This pin seems to cause better grain refinement and redistribution of SiC and graphite particles in the welded nugget zone (NZ) than the other two types. This has led to better improvements in the considered mechanical properties. Also, these properties were improved by increasing welding speed, while increasing the rotational speed has a diverse effect on them. Keywords: AluminumCompocastingCompositesFrictionPropertiesWelding
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Kallee S.W. · 2006
2. Thomas , W.M. ; Dolby , R.E. Friction stir welding developments.Proceedings of the Sixth International Trends in Welding Research, Materials Park, ASM International, USA, 2003, pp. 203–211.
3. 10.1016/S1359-6462(00)00480-210.1016/S1359-6462(00)00480-2 ↗
4. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
5. Krishnan K.N. · Materials Science and Engineering · 2002 · 327 · 24610.1016/S0921-5093(01)01474-5 ↗
6. 10.1016/j.matlet.2008.04.08010.1016/j.matlet.2008.04.080 ↗
7. 10.1007/s11661-005-0093-410.1007/s11661-005-0093-4 ↗
8. 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
9. 10.1016/j.matdes.2008.05.02910.1016/j.matdes.2008.05.029 ↗
10. 10.1179/174328406X7842410.1179/174328406X78424 ↗
11. 10.1016/j.scriptamat.2004.12.02710.1016/j.scriptamat.2004.12.027 ↗
12. 10.1080/10426914.2011.56022210.1080/10426914.2011.560222 ↗
13. 10.1016/j.matdes.2009.11.01510.1016/j.matdes.2009.11.015 ↗
14. 10.1016/j.jmatprotec.2008.02.06610.1016/j.jmatprotec.2008.02.066 ↗
15. 10.1016/j.jmatprotec.2006.07.01810.1016/j.jmatprotec.2006.07.018 ↗
16. Mahmoud R.I. · Science and Technology of Welding and Joining · 2009 · 5 · 214
17. 10.1016/S1006-7191(06)60018-510.1016/S1006-7191(06)60018-5 ↗
18. 10.1080/10426914.2011.56425310.1080/10426914.2011.564253 ↗
19. Newell J. · 2009