journal article·2014-01

How to monitor the modulus of elasticity of concrete, automatically since the earliest age?

Claude Boulay, Stéphanie Staquet, Brice Delsaute, Jérôme Carette, Michela Crespini, Oumaya Yazoghli-Marzouk, Érick Merliot, Sandrine Ramanich

Materials and Structures· Volume 47· Issue 1-2
Publisher page

Abstract

Monitoring the evolution of an early age set of parameters on concrete is necessary to predict the early age behaviour of structures. The difficulty lies in the fact that this monitoring must be automatic because the concrete hardening process takes place over a long period after the casting. This paper presents a new methodology and an apparatus, specifically designed at IFSTTAR, to monitor the hardening process of a concrete. Mainly, the Young’s modulus can be monitored in compression. Measurements start soon after having cast the concrete and the sample temperature is completely controlled so that the concrete maturity is well mastered. The performances of this apparatus, obtained on an ordinary concrete, are compared to more classical measurements using an extensometer mounted on the sample just after the setting time and to ultrasonic measurements. In these cases, the temperatures were not controlled and results have to be expressed in equivalent time. A comparison with another method developed and used at ULB by using the same concrete, in the frame of a joined cooperation between our two laboratories is achieved. This test set up is based on the so called Temperature Stress Testing Machine (TSTM). This device has been specifically designed with a control of the concrete maturity by the use of a dummy specimen only submitted to free deformations (thermal, shrinkage). The TSTM allows compressive and tensile testing starting just after the setting time. In addition, concrete properties, such as compressive and tensile strength, have been characterized at early age. These values have been used for the design of the loading histories applied in the automatic tests. The heat released by the cement hydration has also been measured in order to express the results on a maturity scale.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Hansen W (2011) Report on early-age cracking. Concr Int 33(3):48
2. Tailhan JL, Dal Pont S, Rossi P (2010) From local to global probabilistic modelling of concrete cracking. Ann Solid Struct Mech 1:103–10510.1007/s12356-010-0008-y ↗
3. Dal Pont S, Meftah F, Schrefler BA (2011) Modeling concrete under severe conditions as a multiphase material. Nucl Eng Des 241:562–57210.1016/j.nucengdes.2010.04.015 ↗
4. Boulay C (2007) Développement d’un dispositif de mesure du retrait endogène d’un béton au jeune âge, Huitième édition des Journées Scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le béton (RF)2B, Montréal, 5–6 Juillet 2007
5. BTJADE (2010) Equipment for the determination of autogenous shrinkage of concrete at early age. http://www.lcpc.fr/francais/produits/materiels-mlpc-r/fiche-mlpc-r/article/btjade
6. Boulay C (2012) Test rig for early age measurements of the autogenous shrinkage of a concrete. In: Toutlemonde F, Torrenti J-M (eds) Proceedings of the RILEM-JCJ International Workshop ConCrack 3, 2012, pp 111–122
7. Weiss J (2003) Experimental determination of the “time zero” t 0 (maturity 0, m 0). In: Bentur A (ed) Early age cracking in cementitious systems, report 25 RILEM, report of the RILEM Technical Committee TC 181-EAS: early age shrinkage induced stresses and cracking in cementitious systems, chapter 6.1, p 388
8. Lootens D, Jousset P, Martinie L, Roussel N, Flatt RJ (2009) Yield stress during setting of cement pastes from penetration tests. Cem Concr Res 39(5):401–40810.1016/j.cemconres.2009.01.012 ↗
9. Darquennes A, Staquet S, Espion B (2011) Determination of time-zero and its effect on autogenous deformation evolution. Eur J Environ Civ Eng 15(7):1017–102910.1080/19648189.2011.9695290 ↗
10. Azenha M, Magalhaes F, Faria R, Cunha A (2010) Measurement of concrete E-modulus evolution since casting: a novel method based on ambient vibrations. Cem Concr Res 40:1096–110510.1016/j.cemconres.2010.02.014 ↗
11. Reinhardt H-W, Grosse CU (2004) Continuous monitoring of setting and hardening of mortar and concrete. Constr Build Mater 18:145–15410.1016/j.conbuildmat.2003.10.002 ↗
12. Grosse CU, Reinhardt HW, Herb AT (2005) Ultrasound in through transmission. In: Advanced testing of cement based materials during setting and hardening, chap. 4.4, vol 31. Rilem Publications SARL, pp 162–19010.1617/2912143705.007 ↗
13. Voigt T, Grosse CU, Sun Z, Shah SP, Reinhardt H-W (2005) Comparison of ultrasonic wave transmission and reflection measurements with P- and S-waves on early age mortar and concrete. Mater Struct 38:729–73810.1617/14267 ↗
14. Boumiz A, Vernet C, Cohen Tenoudji F (1996) Mechanical properties of cement pastes and mortars at early ages. Adv Cem Based Mater 3(3–4):94–106
15. Arnaud L, Grosse CU (2005) Wave propagation by transmission, the case of the setting phenomenon in heterogeneous materials. In: Advanced testing of cement based materials during setting and hardening, chap. 4.5, vol. 31. Rilem Publications SARL, pp 191–23810.1617/2912143705.008 ↗
16. Dumoulin C, Karaiskos G, Carette J, Staquet S, Deraemaeker A (2012) Monitoring of the ultrasonic P-wave velocity in early-age concrete with embedded piezoelectric transducers. Smart Mater Struct 21:04700110.1088/0964-1726/21/4/047001 ↗
17. Sant G, Dehadrai M, Bentz D, Lura P, Ferraris CF, Bullard JW, Weiss J (2009) Detecting the fluid to solid transition in cement pastes. Concr Int 31:53–58
18. Robeyst N, Gruyaert E, Grosse CU, De Belie N (2008) Monitoring the setting of concrete containing blast-furnace slag by measuring the ultrasonic p-wave velocity. Cem Concr Res 38:1169–117610.1016/j.cemconres.2008.04.006 ↗
19. Acker P, Chauvin JJ (1990) Essais calorimétriques sur béton: banque de données. LCPC, Paris. CETE du sud-ouest, rapport interne, Bordeaux, p 63
20. Boulay C, Torrenti J-M, Andé J-L, Saintilan R (2010) Quasi-adiabatic calorimetry for concretes: influential factors. BLPC, no. 278, pp. 19–36
21. Boulay C, André J-L, Torrenti J-M (2010) Draft operating protocol to determine the level of heat released during cement hydration on a concrete specimen placed in a quasi-adiabatic calorimeter designed for concretes (QAB). BLPC, no. 278, pp 37–42
22. Staquet S, Boulay C, Robeyst N, De Belie N (2008) Ultrasonic monitoring of setting and autogenous shrinkage development of high performance concrete, creep, shrinkage and durability mechanics of concrete and concrete structures. In: Tanabe et al. (eds) Proc. of the 8th International Conference on Creep, Shrinkage and Durability of Concrete and Concrete Structures (CONCREEP 8), 30 Sep–2 Oct, 2008, Ise-Shima, Japan, pp 321–327
23. Cannard G, Orcel G, Prost J (1990) Le suivi de la prise des ciments par ultrasons, Bulletin de liaison des laboratoires des Ponts et Chaussées, no. 168, Juillet août, pp 89–95
24. Krautkrämer J, Krautkrämer H (1990) Ultrasonic testing of materials, 4th edn. Springer-Verlag, Berlin/New York10.1007/978-3-662-10680-8 ↗
25. EN 12390-1: Shape, dimensions and other requirements for specimens and moulds, EN 12390-2: making and curing specimens for strength tests, EN 12390-3: compressive strength of test specimens, EN 12390-4: compressive strength. Specification for testing machines, EN 12390-6: tensile splitting strength of test specimens
26. Boulay C, Colson A (1979) Un extensomètre à béton éliminant l’influence des déformations transversales sur la mesure des déformations longitudinales. Mater Struct 14(79):35–38
27. Staquet S, Delsaute B, Darquennes A, Espion B (2012) Design of a revisited TSTM system for testing concrete since setting time under free and restraint conditions. In: Toutlemonde F, Torrenti J-M (eds) Proceedings of the RILEM-JCJ International Workshop ConCrack 3, pp 99–110
28. Darquennes A, Staquet S, Delplancke M-P, Espion B (2011) Effect of autogenous deformation on the cracking risk of slag cement concretes. Cem Concr Compos 33:368–379. doi: 10.1016/J.cemconcomp.2010.12.00310.1016/j.cemconcomp.2010.12.003 ↗
29. Rastrup E (1954) Heat of hydration in concrete. Mag Concr Res 6(17):79–9210.1680/macr.1954.6.17.79 ↗
30. Mc Intosh JD (1956) Effect of low temperature curing on the compressive strength of concrete. In: Proceedings of the RILEM symposium on winter concreting, Danish Institute for Building Research, Copenhagen, Session B II, pp 3–17
31. D’Aloïa L (2003) Early age kinetics activation energy, maturity and equivalent age, report of the RILEM TC181—early age shrinkage induced stresses and cracking in cementitious systems, report 25, chap 4.6, pp 127–148
32. De Schutter G, Taerwe L (1996) Degree of hydration-based description of mechanical properties of early age concrete. Mater Struct 29:335–34410.1007/BF02486341 ↗
33. Morgan PH, Mercer LP, Flodin NW (1975) General model for nutritional responses of higher organisms. Proc Natl Acad Sci USA 72:4327–433110.1073/pnas.72.11.4327 ↗
34. Boulay C, Merliot E, Staquet S, Marzouk O (2010) Monitoring of the concrete setting with an automatic method. In: Structural fault and repairs, Edinburgh, 15–18 June
35. Pinto RCA, Irrigaray MAP, Cerqueira RT (2010) The development of ultrasound pulse velocity in early ages for concrete, mortar and cement pastes. In: Structural fault and repairs, Edinburgh, 15–18 June