The property of fiber reinforced ice under uniaxial compression
Source abstract
Abstract
In order to solve the problems of low strength and brittle failure of plain ice when used as building material, ice was reinforced with primary pulp fibers. The fiber reinforced ice (FRI) was researched with uniaxial compressive tests under 20 working cases to investigate the effects of temperature (− 20 °C, − 15 °C, − 10 °C, − 5 °C) and fiber content (0%, 1%, 2%, 4%, 6%). The results show that the strength of FRI is about 4 times of the plain ice and the ductility is much better than plain ice. The mechanical properties of FRI exhibited temperature sensitivity and fiber content sensitivity. Based on the test results, the statistical models of peak strength, peak strain and modulus of elasticity were established, and the uniaxial constitutive models of plain ice and FRI were established. Material design values are suggested by reliability analysis. The conclusions can contribute to the application of FRI materials in buildings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Climate change and permafrost · Smart Materials for Construction · Arctic and Antarctic ice dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Zhang Y (2016) Perspective of China’s participation in polar development and governance. J Qingdao Univ Sci Technol (Soc Sci Ed) 32:75–78
2. Vasiliev NK, Pronk ADC, Shatalina IN (2015) A review on the development of reinforced ice for use as a building material in cold regions. Cold Reg Sci Technol 115:56–6310.1016/j.coldregions.2015.03.006 ↗
3. Vasiliev NK (1993) On development of fiber-ice-composites. Cold Reg Sci Technol 21:195–19910.1016/0165-232X(93)90007-U ↗
4. Makkonen L (1994) Ice and construction. Technical Research Centre of Finland, Espoo10.1201/9781482294866 ↗
5. Wu Y, Liu X, Chen B, Li Q, Luo P, Pronk A (2019) Design, construction and monitoring of an ice composite shell structure. Autom Constr 106:10286210.1016/j.autcon.2019.102862 ↗
6. Pronk A, Mistur M, Li Q et al (2019) The 2017–18 design and construction of ice composite structures in Harbin. Structures 18:117–12710.1016/j.istruc.2019.01.020 ↗
7. Kokawa T (2012) Field experiment of ice dome spanning 20–30 meters. Int J Offshore Polar Eng 12:264–270
8. Janssen F, Houben R (2013) Reinforced ice structures: a research on the building method fort and application of ice composite. Eindhoven University of Technology, Eindhoven
9. Pronk A, Arntz M, Hermens (2016) Lex Proceedings of IASS Annual Symposia, IASS 2016 Tokyo Symposium: spatial structures in the 21st century-shell structures, vol 8, pp 1–8
10. Tabassum Syda (2017) Study of mechanical properties of cellulose reinforced ice. Aalto University, Espoo
11. Li J, Wei Z, Wu C (2015) Preparation and properties of novel building materials at low temperature. Mater Des 67:464–46810.1016/j.matdes.2014.10.040 ↗
12. Petrenko V, Whitworth R (2010) Physics of ice. Oxford University Press, London
13. Arakawa M, Maeno N (1997) Mechanical strength of polycrystalline ice under uniaxial compression. Cold Reg Sci Technol 26:215–22910.1016/S0165-232X(97)00018-9 ↗
14. Batto R, Schulson E (1993) On the ductile-to-brittle transition in ice under compression. Acta Metal Mater 41:2219–222510.1016/0956-7151(93)90391-5 ↗
15. Kermani M, Farzaneh M, Gagnon R (2007) Compressive strength of atmospheric ice. Cold Reg Sci Technol 49:195–20510.1016/j.coldregions.2007.05.003 ↗
16. Schwarz J (1981) Standardized testing methods for measuring mechanical properties of ice. Cold Reg Sci Technol 4:245–25310.1016/0165-232X(81)90007-0 ↗
17. Sinha N (1981) Rate sensitivity of compressive strength of columnar grained ice. Exp Mech 21:209–21810.1007/BF02326843 ↗
18. Gold L (1958) Some observation on the dependence of strain on stress for ice. Can J Phys 36:1265–127510.1139/p58-131 ↗
19. Schulson E (2001) Brittle failure of ice. Eng Fract Mech 68:1839–188710.1016/S0013-7944(01)00037-6 ↗
20. Cruz P, Belis J (2016) Compressive strength of ice and cellulose-ice composite. Structures and architecture. Taylor & Francis Group, London, pp 348–355
21. Gold L (1997) Engineering properties of plain-water ice. Glaciology 19:197–21210.3189/S0022143000215608 ↗
22. Smith W, Hashemi J (2005) Foundations of materials science and engineering. McGraw-Hill series in materials science. McGraw-Hill, Boston
23. Petrovic J (2003) Review mechanical properties of ice and snow. J Mater Sci 38:1–610.1023/A:1021134128038 ↗
24. (2016) Unified standard for reliability design of engineering structures: GB 50153-2008. China Architecture and Building Press, Beijing
25. Gong J (2010) Reliability design principle of engineering structures. China Machine Press, Beijing
26. Zhang M (2009) Structural reliability analysis—methods and procedures. Science Press, Beijing
27. (2016) Technical standard for ice and snow landscape buildings: GB 51202-2016. China Architecture & Building Press, Beijing
28. Meng W (2015) Experimental research on mechanical properties of ice. J North China Univ Water Resour Electr Power (Nat Sci Ed) 36:40–43
29. Guo Z (2003) Principle and analysis of reinforced concrete. Tsinghua University Press, Beijing