journal article·2021-12

Combining the bi-objective approach and conditional coring for a reliable estimation of on-site concrete strength variability

Zoubir-Mehdi Sbartaï, Maitham Alwash, Denys Breysse, Xavier Romão, Vincenza A. M. Luprano

Materials and Structures· Volume 54· Issue 6
Publisher page

Abstract

In real practice, to assess concrete strength in structures, engineers usually use non-destructive tests (NDT) (e.g. rebound hammer or ultrasonic pulse velocity) in addition to destructive tests (DT) that are carried out on cores extracted from the structure. The results of these tests (NDT and DT) are used to identify a relationship (a conversion model) between the non-destructive measured features and the concrete strength. This model can be then used to assess the strength at any location within the structure under consideration, as well as the mean strength and the strength standard deviation (strength variability). In fact, the assessment of concrete strength variability is as important as the mean strength since the mean strength alone cannot provide a clear picture about the concrete under investigation. However, due to the presence of many uncertainties, the reliability of the values estimated by NDTs need to be improved. In the present study, a wide range of concretes having mean strengths of 10–50 MPa and concrete strength variabilities of 10–30% (defined by the coefficient of variation) is analysed. The main target of this paper is to analyse how would the reliability of assessing the concrete strength variability changes if the bi-objective method is used as a model identification approach and the conditional coring concept is applied for selecting core locations. Results are analysed in terms of the minimum number of cores NC that corresponds to a specific uncertainty level, concrete characteristics, and quality of NDT measurements. The results show an important improvement in the reliability of assessing the strength variability when both the bi-objective method and conditional coring are applied together
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Probabilistic and Robust Engineering Design · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Breysse D, Balayssac JP, Biondi S, Corbett D, Goncalves A, Grantham M, Luprano V, Masi A, Monteiro A, Sbartai ZM (2019) Recommendation of RILEM TC249-ISC on non-destructive in situ strength assessment of concrete. Mater Struct 52(4):1–2110.1617/s11527-019-1369-2 ↗
2. Breysse D, Balayssac JP (eds) (2021) Non-destructive in situ strength assessment of concrete: practical application of the RILEM TC 249-ISC recommendations. RILEM State- of-the-Art Reports, vol 32. Springer10.1007/978-3-030-64900-5 ↗
3. Montgomery D, Runger G (2003) Applied statistics and probability for engineers. Wiley, USA
4. DeCoursey WJ (2003) Statistics and probability for engineering applications, 1st edn. Elsevier Science, Saskatoon
5. Walpole RE, Myers RH, Myers SL, Ye K (2012) Probability and statistics for engineers and scientists, 9th edn. Prentice Hall, Boston
6. EN 13791 (2007). Assessment of in-situ compressive strength in structures and precast concrete components. CEN, Brussels
7. Breysse D, Balayssac JP, Biondi S, Borosnyói A, Candigliota E, Chiauzzi L, Garnier V, Grantham M, Gunes O, Luprano V, Masi A, Pfister V, Sbartaï ZM, Szilágyi K (2017) Non destructive assessment of in situ concrete strength: comparison of approaches through an international benchmark. Mater Struct 50(133):1–17
8. Kheder G (1999) A two stage procedure for assessment of in situ concrete strength using combined non-destructive testing. Mater Struct 32(6):410–41710.1007/BF02482712 ↗
9. Pucinotti R (2015) Reinforced concrete structure: nondestructive in situ strength assessment of concrete. Constr Build Mater 75:331–34110.1016/j.conbuildmat.2014.11.023 ↗
10. Alwash M, Sbartai ZM, Breysse D (2016) Non-destructive assessment of both mean strength and variability of concrete: a new bi-objective approach. Constr Build Mater 113:880–88910.1016/j.conbuildmat.2016.03.120 ↗
11. Alwash M (2017) Assessment of concrete strength in existing structures using nondestructive tests and cores: analysis of current methodology and recommendations for more reliable assessment., Ph.D. thesis, University of Bordeaux
12. Alwash M, Breysse D, Sbartai ZM (2017) Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores. Constr Build Mater 140:354–36310.1016/j.conbuildmat.2017.02.129 ↗
13. Romão X, Delgado R, Guedes J, Costa A (2010) A comparative application of different EC8-3 procedures for the seismic safety assessment of existing structures. Bull Earthq Eng 8(1):91–11810.1007/s10518-009-9123-8 ↗
14. Romão X, Gonçalves R, Costa A, Delgado R (2012) Evaluation of the EC8-3 confidence factors for the characterization of concrete strength in existing structures. Mater Struct 45(11):1737–175810.1617/s11527-012-9868-4 ↗
15. Pereira N, Romão X (2016) Material strength safety factors for the seismic safety assessment of existing RC buildings. Constr Build Mater 119:319–32810.1016/j.conbuildmat.2016.05.055 ↗
16. Cristofaro MT, Pucinotti R, Tanganelli M, De Stefano M (2015) The dispersion of concrete compressive strength of existing buildings. In: Computational methods, seismic protection, hybrid testing and resilience in earthquake engineering, pp 275–28510.1007/978-3-319-06394-2_16 ↗
17. Pereira N, Romão X (2016) Assessment of the concrete strength in existing buildings using finite population approach. Constr Build Mater 110:106–11610.1016/j.conbuildmat.2016.02.021 ↗
18. Szilágyi K, Borosnyói A, Zsigovics I (2014) Extensive statistical analysis of the variability of concrete rebound hardness based on a large database of 60 years experience. Constr Build Mater 53:333–34710.1016/j.conbuildmat.2013.11.113 ↗
19. Der Kiureghian A, Ditlevsen O (2009) Aleatory or epistemic? Does it matter? Struct Saf 31(2):105–11210.1016/j.strusafe.2008.06.020 ↗
20. Breysse D, Balayssac JP (2018) Strength assessment in reinforced concrete structures: From research to improved practices. Constr Build Mater 182:1–910.1016/j.conbuildmat.2018.06.093 ↗
21. JCGM 100 (2008) Evaluation of measurement data—guide to the expression of uncertainty in measurement. JCGM, Geneva.
22. Bungey J (1980) The validity of ultrasonic pulse velocity testing of in-place concrete for strength. NDT Int 13(6):296–30010.1016/0308-9126(80)90021-8 ↗
23. Komlos K et al (1996) Ultrasonic pulse velocity test of concrete properties as specified in various standards. Cement Concr Compos 18:357–36410.1016/0958-9465(96)00026-1 ↗
24. Popovics S, Rose JL, Popovics JS (1990) The behavior of ultrasonic pulses in concrete. Cem Concr Res 20(2):259–27010.1016/0008-8846(90)90079-D ↗
25. Qasrawi HY (2000) Concrete strength by combined nondestructive methods simply and reliably predicted. Cem Concr Res 30:739–74610.1016/S0008-8846(00)00226-X ↗
26. Hobbs B, Kebir MT (2007) Non-destructive testing techniques for the forensic engineering investigation of reinforced concrete buildings. Forensic Sci Int 167(2):167–17210.1016/j.forsciint.2006.06.065 ↗
27. Pfister V, Tundo A, Luprano VAM (2014) Evaluation of concrete strength by means of ultrasonic waves: a method for the selection of coring position. Constr Build Mater 61:278–28410.1016/j.conbuildmat.2014.03.017 ↗
28. Alwash M, Breysse D, Sbartai ZM (2017) Using Monte-Carlo simulations to evaluate the efficiency of different strategies for nondestructive assessment of concrete strength. Mater Struct 50(90):1–14
29. Breysse D (2012) Nondestructive evaluation of concrete strength: an historical review and a new perspective by combining NDT methods. Constr Build Mater 33:139–16310.1016/j.conbuildmat.2011.12.103 ↗
30. Breysse D, Martínez-Fernández JL (2014) Assessing concrete strength with rebound hammer: review of key issues and ideas for more reliable conclusions. Mater Struct 47(9):1589–160410.1617/s11527-013-0139-9 ↗
31. Alwash M, Breysse D, Sbartaï ZM (2015) Non-destructive strength evaluation of concrete: analysis of some key factors using synthetic simulations. Constr Build Mater 99:235–24510.1016/j.conbuildmat.2015.09.023 ↗
32. ACI 228.1R (2003) In-place methods to estimate concrete strength. American Concrete Institute, Detroit
33. Breysse D, Romão X, Alwash M, Sbartaï ZM, Luprano VA (2020) Risk evaluation on concrete strength assessment with NDT technique and conditional coring approach. J Build Eng 32(101541):1–13