journal article·2012-07

Statistical models to predict fresh and hardened properties of self-consolidating concrete

Wu-Jian Long, Guillaume Lemieux, Soo-Duck Hwang, Kamal Henri Khayat

Materials and Structures· Volume 45· Issue 7
Publisher page

Abstract

Several material properties and mix design parameters affect the performance of self-consolidat- ing concrete (SCC) and need to be taken into consideration to enhance the fresh and hardened properties of the concrete. A factorial design was conducted to model the effect of mixture parameters and material properties on workability, mechanical properties, and visco-elastic properties of SCC used for the construction of precast/prestressed structural elements. The modeled mixture parameters included the binder content, binder type, water-to-cementitious materials ratio, sand-to-total aggregate ratio (S/A), and dosage of thickening-type viscosity-modifying admix- ture. In total, 16 SCC mixtures were investigated to establish a factorial design with five main factors. Three replicate SCC mixtures were prepared to estimate the degree of the experimental error for the modeled responses. The mixtures were evaluated to determine several key responses that affect the performance of precast, prestressed concrete, includ- ing the filling ability, passing ability, filling capacity, stability, compressive strength, modulus of elasticity, flexural strength, autogenous shrinkage, drying shrinkage, and creep. The derived statistical models enable to quantify the level of significance of each of the five investigated parameters on fresh and hardened properties of SCC, which can simplify the test protocol needed to optimize SCC. Based on the results derived from the factorial design, recommendations for the proportioning of SCC in terms of workability, mechanical properties, and visco-elastic properties are given.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. ACI Committee 237 (2007) Self-consolidating concrete (ACI 237R-07), American Concrete Institute, Farmington Hills, MI, pp 30
2. Juvas K (2005) The European experience of working with self-compacting concrete in the precast concrete industry. In: Proceedings of the combining the second North American conference on the design and use of self-consolidating concrete and the fourth international RILEM symposium on self-compacting concrete, Chicago, USA, vol 2, pp 1105–1111
3. Juvas K (2007) Experiences of working with self-compacting concrete in the precast industry. Proceedings of the 5th international RILEM symposium on self-compacting concrete, Ghent, Belgium, Sep 3–5:933–938
4. Pellerin B, Lamotte J, Gnagne C, Canevet C (2005) Use of dedicated admixtures eases the implementation of SCC in the precast industry. In: Proceedings of the combining the second North American conference on the design and use of self-consolidating concrete and the fourth international RILEM symposium on self-compacting concrete, Session J-3, Chicago, USA
5. Naito C, Hoover M (2005) Applicability of self-consolidating concrete for use in precast bridge beam construction. In: Proceedings of the combining the second North American conference on the design and use of self-consolidating concrete and the fourth international RILEM symposium on self-compacting concrete, Session E-3, Chicago, USA
6. Camacho R, Afif R, Corona G, Roman H, Sanchez M (2007) Applications of SCC technology for precast/prestressed elements: the Mexican experiences. In: Proceedings of the 5th international RILEM symposium on self-compacting concrete, Ghent, Belgium, pp 1071–1078
7. Hwang SD, Khayat KH, Bonneau O, Mayen-Reyna D (2004) Workability requirements of self-consolidating concrete used in casting highly restricted structural sections. In: Proceedings of the 4th international conference on concrete under severe conditions (CONSEC 04), Seoul, Korea, pp 1321–1328
8. Ouchi M, Nakamura S, Osterson T, Hallberg S, Lwin M (2003) Applications of self-compacting concrete in Japan, Europe and the United States. ISHPC, pp 1–20
9. Domone PL (2006) Self-compacting concrete: an analysis of 11 years of case studies. Cem Concr Compos 28(2):197–20810.1016/j.cemconcomp.2005.10.003 ↗
10. Paultre P, Khayat KH, Cusson D, Tremblay S (2005) Structural performance of self-consolidating concrete used in confined concrete columns. ACI Struct J 102(4):560–568
11. Hwang SD, Khayat KH, Bonneau O (2006) Performance-based specifications of self-consolidating concrete used in structural applications. ACI Mater J 103(2):121–129
12. Khayat KH (1999) Workability, testing, and performance of self-consolidating concrete. ACI Mater J 96(3):346–353
13. Khayat KH, Ghezal A, Hadriche MS (2000) Utility of statistical models in proportioning self-consolidating concrete. Mater Struct J 33(5):338–34410.1007/BF02479705 ↗
14. Khayat KH, Long WJ (2010) Shrinkage of precast prestressed self-consolidating concrete. ACI Mater J 107(3):231–238
15. Langley R (1971) Practical statistics simply explained. Dover Publications Inc., Mineola