Experimental study on impact behaviour of concrete-filled steel tubes at elevated temperatures up to 800 °C
Source abstract
Abstract
The dynamic behaviour of normal strength concrete-filled steel tubes (CFT) at elevated temperatures up to 800 °C under axial impact loading was experimentally studied by using a newly developed spilt Hopkinson pressure bar (SHPB) together with an electrical furnace. The effects of high temperature, impact velocity, steel ratio and slenderness ratio on the impact behaviour of CFT at elevated temperatures were experimentally studied. The stress and strain time history curves of the tested specimens were recorded to analyze the impact behaviour of CFT at elevated temperatures. The failure modes and the effects of the experimental parameters on the impact resistance of CFT are discussed. The test results showed that normal strength concrete-filled steel tube at elevated temperatures had a more excellent impact resistance in the paper than that described in Huo et al. (2009). A simplified calculation method was updated by introducing the reasonable dynamic increase factor model of hot concrete to reasonably assess the impact resistance of CFT at elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Watstein D (1953) Effect of straining rate on the compressive strength and elastic properties of concrete. ACI J Proc 49(4):729–744
2. Goldsmith W, Polivka M, Yang T (1966) Dynamic behaviour of concrete. Exp Mech 6(2):65–7910.1007/BF02326224 ↗
3. Soroushian P, Choi KB, Alhamad A (1986) Dynamic constitutive behavior of concrete. ACI J Proc 83(2):251–259
4. Chen ZY, Luo JQ, Pan XW (1986) Behaviour of concrete-filled steel tubular columns under axial rapid loading. Tsinghua University technical reports TR 4 of Research Laboratory of Earthquake and Blast Resistant Engineering: behaviour of reinforced concrete structural members subjected to impulsive loads 1986. Tsinghua University Press, Beijing (in Chinese)
5. Prichard SJ, Perry SH (2000) The impact behavior of sleeved concrete cylinders. Struct Eng 78(17):23–27
6. Xiao Y, Shan JH, Zheng Q, Chen BS, Shen YL (2009) Experimental studies on concrete filled steel tubes under high strain rate loading. J Mater Civil Eng (ASCE) 21(10):569–57710.1061/(ASCE)0899-1561(2009)21:10(569) ↗
7. Han LH, Zhao XL, Yang YF et al (2003) Experimental study and calculation of fire resistance of concrete-filled hollow steel columns. J Mater Civil Eng (ASCE) 129(3):346–356
8. Huo JS, Zheng Q, Chen BS, Xiao Y (2009) Tests on impact behaviour of micro-concrete-filled steel tubes at elevated temperatures up to 400 °C. Mater Struct 42(10):1325–133410.1617/s11527-008-9452-0 ↗
9. Jia B, Tao JL, Li ZL et al (2009) Dynamic mechanical performance of concrete at elevated temperatures. In: The 4th international conference on protection of structures against hazards, Beijing, pp 189–193
10. GB50204-2002 (2002) Code for acceptance of constructional quality of concrete structures GB50204-2002. Beijing (in Chinese)
11. Bischoff PH, Perry SH (1991) Compressive behaviour of concrete at high strain rates. Mater Struct 24(4):425–45010.1007/BF02472016 ↗
12. Davies EDH, Hunter SC (1963) The dynamic compression testing of solids by the method of the split Hopkinson pressure bar. Mech Phys solids 11(3):155–17910.1016/0022-5096(63)90050-4 ↗
13. Li QM, Meng H (2003) About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar test. Int J Solids Struct 40(2):343–36010.1016/S0020-7683(02)00526-7 ↗
14. ACI Committee 318 (2005) Building code requirements for structural concrete (ACI 318-05) and commentary (318R-05). American Concrete Institute, Farmington Hills (MI), 430
15. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc Lond B 62(11):676–70010.1088/0370-1301/62/11/302 ↗
16. Lindholm US (1964) Some experiments with the split Hopkinson pressure bar. J Mech Phys Solids 12(5):317–33510.1016/0022-5096(64)90028-6 ↗
17. ABAQUS (2006) ABAQUS 6.6, theory manual and users manual. HKS-Hibbitt, Karlsson & Sorensen Inc, Pawtucket
18. Lie TT, Irwin RJ (1990) Evaluation of fire resistance of reinforced concrete beam-columns with rectangular cross-section. NRC-CNRC Internal Report, No. 601, Ottawa (Canada)
19. Huo JS, Huang GW, Xiao Y (2009) Effects of sustained axial load and cooling phase on post-fire behaviour of concrete-filled steel tubular stub columns. J Constr Steel Res 65(8–9):1664–1676
20. European Committee for Standardization (CEN) (1993) Eurocode 3: design of steel structure. Part 1.2: general rules—structural fire design. ENV 1993-1-2 2005, London
21. Han LH, Zhao XL, Tao Z (2001) Tests and mechanics model of concrete-filled SHS stub columns, columns and beam-columns. Steel Compos Struct Int J 1(1):51–7410.12989/scs.2001.1.1.051 ↗
22. Elfahal MM, Krauthammer T, Ohno T et al (2005) Size effect for normal strength concrete cylinders subjected to axial impact. Int J Impact Eng 31(4):461–48110.1016/j.ijimpeng.2004.01.003 ↗
23. CEB (1988) Concrete structures under impact and impulsive loading. Bulletin d’Information No. 187, Comité Euro-International du Béton, Lausanne, France
24. Malvar LJ (1998) Review of static and dynamic properties of steel reinforcing bars. ACI Mater J 95(5):609–616
25. Li W, Guo ZH (1993) Experimental investigation on strength and deformation of concrete under high temperature. Chin J Build Struct 14(1):8–16 (in Chinese)
26. ECCS,European recommendations for the fire safety of steel structure, Elsevier, Amsterdam 1983
27. He YM, Huo JS, Xiao Y (2011) Experimental study on dynamic behavior of concrete at elevated temperatures. Adv Sci Lett 4(3):1128–113110.1166/asl.2011.1732 ↗
28. Yu Q (2011) Experimental study on SHPB impact behaviors of plain concrete at elevated temperatures. Master thesis 2011, Hunan University, Changsha, Hunan