Activator-related effects of sodium hydroxide storage solution in standard testing of fly ash geopolymer mortars for alkali–silica reaction
Source abstract
Abstract
Sodium hydroxide (NaOH) is used as storage solution in standard testing of Portland cement mortars for alkali–silica reaction (ASR). Various researches also similarly use NaOH storage solution for ASR testing of geopolymer binders. However, NaOH is coincidentally an alkali activator of geopolymers. So, questions arise regarding the potential activator-related effects of NaOH when employed as storage solution for ASR testing of geopolymer mortars. The present study compared the ASR response behaviour of fly ash-based geopolymer (FA-GPC) binder with that of ordinary Portland cement (OPC). FA-GPC and OPC mortar prisms of 25 × 25 × 285 mm size were prepared using highly reactive aggregate, then the mortars were subjected to ASTM C1260 (2014) accelerated ASR mortar bar test, under varied concentrations of 0.5M to 3M NaOH storage solution. Analytical studies were conducted using X-ray diffraction and scanning electron microscopy. Findings showed that ASR expansion of FA-GPC mortars was very low or negligible as expected, while corresponding OPC mortars gave high expansion behaviour. Indeed, the 14-day expansion of OPC mortars in standard 1M NaOH storage solution, was 2.0 to 2.5 times greater than that of FA-GPC mortars. But upon increase in concentration of the storage solution beyond 1M NaOH, FA-GPC mortars showed steady corresponding growth in expansion, owing to alkali attack rather than ASR. Evidently, NaOH storage solution being itself an alkali activator, causes secondary geopolymerization with a constant risk potential that may or may not lead to disruptive alkali attack, depending on the solution’s concentration.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Neville AM (1996) Properties of concrete, 4th edition, 1996 (also 3rd edition 1981). Wiley, New York
2. Lindgård J, Andiç-Çakır Ö, Fernandes I, Rønning TF, Thomas MDA (2012) Alkali - silica reactions (ASR): Literature review on parameters influencing laboratory performance testing. Cem Concr Res 42:223–24310.1016/j.cemconres.2011.10.004 ↗
3. Fernández-Jiménez A, Puertas F (2002) The alkali-silica reaction in alkali-activated granulated slag mortars with reactive aggregate. Cem Concr Res 32:1019–102410.1016/S0008-8846(01)00745-1 ↗
4. Plum DW, Poulsen E, Idorn GM (1958) Preliminary survey of alkali reaction in concrete. Ingeniorum International Edition, Danemark 2:26–32
5. Puertas F, Palacios M, Gil-Maroto A, Vázquez T (2009) Alkali - aggregate behaviour of alkali - activated slag mortars: effect of aggregate type. Cem Concr Compos 31(5):277–28410.1016/j.cemconcomp.2009.02.008 ↗
6. Pouhet R, Cyr M (2015) Alkali–silica reaction in metakaolin - based geopolymer mortar. Mater Struct 48:571–58310.1617/s11527-014-0445-x ↗
7. Bakharev T (2003) Resistance of geopolymer materials to acid attack. Cem Concr Res 35:658–67010.1016/j.cemconres.2004.06.005 ↗
8. Kupwade-Patil K, Allouche EN, Watts CA, Badar MS (2013) Selected studies of the durability of fly ash - based geopolymer concretes. J ASTM Int Geopolymer Binder Syst 144–16410.1520/STP156620120095 ↗
9. Shi C, Shi Z, Hu X, Zhao R, Chong L (2015) A review on alkali - aggregate reactions in alkali - activated mortars/concretes made with alkali-reactive aggregates. Mater Struct 48:621–62810.1617/s11527-014-0505-2 ↗
10. Kupwade-Patil K, Allouche E (2011) Effect of Alkali Silica Reaction (ASR) in Geopolymer Concrete, World Coal Ash Conference Denver, CO. Paper, USA, p 155
11. Cheng TW, Chiu JP (2003) Fire-resistant geopolymer produced by granulated blast furnace slag. Miner Eng 16:205–21010.1016/S0892-6875(03)00008-6 ↗
12. Kong DLY, Sanjayan JG (2008) Damage behavior of geopolymer composites exposed to elevated temperatures. Cem Concr Compos 30:986–99110.1016/j.cemconcomp.2008.08.001 ↗
13. Junaid MT, Kayali O, Khennane A (2017) Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures. Mater Struct 50:1–1010.1617/s11527-016-0885-6 ↗
14. Gunasekera C, Setunge S, Law DW (2019) Creep and drying shrinkage of different fly-ash-based geopolymers. ACI Mater J 116(1):39–49
15. Bondar D, Lynsdale CJ, Milestone NB, Hassani N, Ramezanianpour AA (2011) Engineering properties of alkali-activated natural pozzolan concrete. ACI Mater J 108(1):64–72
16. Davidovits J (1994) Properties of geopolymer cements. In: First international conference on alkaline cements and concretes, Kiev, Ukraine, pp 131–149
17. Duxson P, JimenezA, Provis JL, Lukey GC, Palomo A, van Deventer JSJ F (2007) Geopolymer technology: the current state of the art. J Mater Sci 42(9):2917–293310.1007/s10853-006-0637-z ↗
18. Naghizadeh A, Ekolu SO (2020) Effects of compositional and physic-chemical mix design parameters on properties of fly ash geopolymer mortars. SILICON. https://doi.org/10.1007/s12633-020-00799-210.1007/s12633-020-00799-2 ↗
19. Ekolu SO, Thomas MDA, Hooton RD (2006) Studies on Ugandan volcanic ash and tuff. In: Proceedings of the First International Conference on Advances in Engineering and Technology, Entebbe, July, Uganda, pp 75–8310.1016/B978-008045312-5/50009-1 ↗
20. Tchadjie LN, Ekolu SO (2018) Enhancing the reactivity of aluminosilicate materials toward geopolymer synthesis. J Mater Sci 53:4709–473310.1007/s10853-017-1907-7 ↗
21. Tchadjie LN, Ekolu SO, Quainoo H, Tematio P (2021) Effect of incorporation of mechanically activated bauxite on the strength and microstructure of volcanic ash-based geopolymer mortars. J Build Eng 41(7):102384. https://doi.org/10.1016/j.jobe.2021.10238410.1016/j.jobe.2021.102384 ↗
22. Annapurna D, Kishore R (2020) Influence of alkali–silica reaction on geopolymer concrete. In: Pancharathi R, Sangoju B, Chaudhary S (eds) Advances in Sustainable construction materials, Lecture Notes in Civil Engineering, vol 68. Springer, Singapore10.1007/978-981-15-3361-7_5 ↗
23. Annapurna D, Kishore R, Anil K (2020) Effect of different aggregates on alkali silica reaction of geopolymer concrete. In: International Conference on Emerging Trends in Engineering (ICETE). Learning and Analytics in Intelligent Systems, vol 2. Springer, Cham10.1007/978-3-030-24314-2_2 ↗
24. Slaty F, Khoury H, Rahier H, Wastiels J (2015) Durability of alkali activated cement produced from kaolinitic clay. Appl Clay Sci 104:229–23710.1016/j.clay.2014.11.037 ↗
25. Fernandez-Jimenez A, García-Lodeiro I, Palomo A (2007) Durability of alkali - activated fly ash cementitious materials. J Mater Sci 42:3055–306510.1007/s10853-006-0584-8 ↗
26. ASTM C1260 (2014) Standard test method for potential alkali reactivity of aggregates (mortar - bar method), Annual book of ASTM Standards, ASTM International, West Conshohocken, PA, www.astm.org
27. Thompson A, Saha AK, Sarker PK (2019) Comparison of the alkali-silica reactions of ferronickel slag aggregate in fly ash geopolymer and cement mortars. Eur J Environ Civil Eng. https://doi.org/10.1080/19648189.2019.168606810.1080/19648189.2019.1686068 ↗
28. Naghizadeh A, Ekolu SO (2017) Investigation of mixture factors influencing alkali–silica reaction in fly Ash-based geopolymer mortars. In: 71st RILEM Annual Week ICACMS 2107, Chennai, India, pp 395–400
29. Oberholster RE, Davies G (1986) An accelerated method for testing the potential alkali reactivity of siliceous aggregates. Cem Concr Res 16(2):181–18910.1016/0008-8846(86)90134-1 ↗
30. van Aardt JHP, Visser S (1982) Reactions between rocks and the hydroxides of calcium, sodium and potassium, progress report no. 2: identification of reaction products and a study of the dimensional changes of cement-bonded mortar specimens immersed in alkali solutions at 40 °C and 80 °C. CSIR Research Report, Pretoria
31. ASTM C227 (1981) Standard test method for potential alkali reactivity of cement-aggregate combinations (mortar bar method). In: Annual book of ASTM Standards, Part 14, Concrete and Mineral Aggregates, ASTM International, West Conshohocken, PA, www.astm.org
32. ASTM C305 (2020) Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency. Annual book of ASTM Standards, ASTM International, West Conshohocken, PA, www.astm.org
33. Naghizadeh A, Ekolu SO (2019) Behaviour of fly ash geopolymer binders under exposure to alkaline media. Asian J Civ Eng 20(6):785–79810.1007/s42107-019-00144-y ↗
34. Koshy N, Singh DN (2016) Textural alterations in coal fly ash due to alkali activation. J Mater Civ Eng 28(11):1–710.1061/(ASCE)MT.1943-5533.0001644 ↗
35. Koshy N, Singh DN, Jha B, Kadali S, Patil J (2015) Characterization of Na and Ca zeolites synthesized by various hydrothermal treatments of fly ash. Adv Civ Eng Mater 4(1):131–14310.1520/ACEM20140048 ↗
36. Naghizadeh A, Ekolu SO, Musonda I (2020) High temperature heat - treatment (HTHT) for partial mitigation of alkali attack in hardened fly ash geopolymer binders. Case Stud Constr Mater 12:e00341. https://doi.org/10.1016/j.cscm.2020.e0034110.1016/j.cscm.2020.e00341 ↗
37. Shi Z, Geng G, Leemann A, Lothenbach B (2019) Synthesis, characterization, and water uptake property of alkali-silica reaction products. Cem Concr Res 121:58–7110.1016/j.cemconres.2019.04.009 ↗