journal article·2011-02

Assessment of pH and temperature effects on stress corrosion cracking of 1018 low carbon steel

M A Espinosa‐Medina, E Sosa, C Ángeles‐Chávez, A Contreras

Publisher page

Abstract

Stress corrosion cracking tests (SCC) were performed on 1018 low carbon steel into 0·5M NaCl solution at different pH values and temperatures of 25, 50 and 70°C using the slow strain rate testing technique. Evaluations were complemented with hydrogen permeation measurements and electrochemical impedance spectroscopy. Studies show hydrogen diffusion effects depending on temperature and pH. The maximum hydrogen diffusion was observed at 70°C (pH<1). The SCC susceptibility was measured as the percentage reduction in area and the time to failure and was maximal at pH<1 at the temperatures studied. The most likely mechanism for the cracking susceptibility of 1018 steel in the chloride solutions seems to be hydrogen assisted anodic dissolution assisted by hydrogen embrittlement. After failure, the fracture surfaces were observed by scanning electron microscopy and chemical analysis was obtained by X‐ray energy dispersive spectroscopy. The specimens tested in air exhibited a ductile type of failure, whereas, in the corrosive solution the specimens showed a brittle fracture.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Sedriks AJ · Corros. Test. Made Easy · 1990 · 1 · 1
2. Kane RD, Wilhelm SM: ‘Status of standardization activities on slow strain rate testing techniques’, ‘Slow strain rate testing for the evaluation of environmentally induced cracking: research and engineering applications’, ASTM STP 1210(ed., Kane RD ASTM publication, 1993, 40–47.10.1520/STP1210-EB ↗
3. 10.5006/1.331593110.5006/1.3315931 ↗
4. 10.5006/1.329032010.5006/1.3290320 ↗
5. Krist K · Pipeline Gas J · 1998 · 49
6. Delanty B · Oil Gas J · 1992 · 90 · 39
7. 10.1081/LFT-12001854710.1081/LFT-120018547 ↗
8. Gonzalez G · Revista Mexicana de Fisica · 2004 · 50 · 60
9. 10.1016/j.corsci.2003.08.00110.1016/j.corsci.2003.08.001 ↗
10. 10.1179/14784220322500893010.1179/147842203225008930 ↗
11. 10.1016/j.corsci.2004.05.01810.1016/j.corsci.2004.05.018 ↗
12. 10.1179/14784220422501682210.1179/147842204225016822 ↗
13. 10.1098/rspa.1962.020510.1098/rspa.1962.0205 ↗
14. Liu PW · Mater. Lett · 2003 · 57
15. Crank J: ‘The mathematics of diffusion’, 44; 1977, London, Oxford University Press.
16. 10.5006/1.331593110.5006/1.3315931 ↗
17. Liou HY · Corrosion · 2002 · 44
18. 10.5006/1.328399310.5006/1.3283993 ↗
19. Harkirat S: Ahluwalia: ‘Problems associated with slow strain rate quality assurance testing if nickel-base corrosion resistant alloys tubular in hydrogen sulfide environments’, ‘Slow strain rate testing for the evaluation of environmentally induced cracking: research and engineering applications’, ASTM STP 1210 (ed., Kane RDASTM publication, 1993, 225–239.10.1520/STP12766S ↗
20. Wilhelm SM, Currie DM: ‘Relationship of localized corrosion and SCC in oil and gas production environments’, ‘Slow strain rate testing for the evaluation of environmentally induced cracking: research and engineering applications’, ASTM STP 1210 (ed., Kane RD ASTM publication, 1993, 263–289.10.1520/STP12768S ↗
21. 10.5006/1.328393610.5006/1.3283936 ↗
22. Song RG · Acta Mater · 2004 · 52
23. 10.1016/0921-5093(90)90281-710.1016/0921-5093(90)90281-7 ↗
24. Asahi H · Metall. Trans. A · 1988 · 1910.1007/BF02645042 ↗
25. 10.1016/S0921-5093(00)00950-310.1016/S0921-5093(00)00950-3 ↗
26. 10.1016/j.jallcom.2004.10.00710.1016/j.jallcom.2004.10.007 ↗
27. Koper MTM · Adv. Chem. Phys · 1996 · 92 · 161