journal article·2023-07-17Open access

Effect of Cooling Rate on Crystallization Behavior during Solidification of Hyper Duplex Stainless Steel S33207: An In Situ Confocal Microscopy Study

Yong Wang, Wangzhong Mu

Crystals· Volume 13· Issue 7

Abstract

Hyper duplex stainless steel (HDSS) is a new alloy group of duplex stainless steels with the excellent corrosion resistance and mechanical properties among the existing modern stainless steels. Due to the incorporation of the high content of alloying elements, e.g., Cr, Ni, Mo, etc., the crystallization behavior of δ-ferrite from liquid is of vital importance to be controlled. In this work, the effect of the cooling rate (i.e., 4 °C/min and 150 °C/min) on the nucleation and growth behavior of δ-ferrite in S33207 during the solidification was investigated using a high-temperature confocal scanning laser microscope (HT-CLSM) in combination with electron microscopies and thermodynamic calculations. The obtained results showed that the solidification mode of S33207 steel was a ferrite–austenite type (FA mode). L→δ-ferrite transformation occurred at a certain degree of undercooling, and merging occurred during the growth of the δ-ferrite phase dendrites. Similar microstructure characteristics were observed after solidification under two different cooling rates. The variation in the area fraction of δ-ferrite with different temperatures and time intervals during the solidification of S33207 steels was calculated at different cooling rates. The post-microstructure as well as its composition evolution were also briefly investigated. This work shed light on the real-time insights for the crystallization behavior of hyper duplex stainless steels during their solidification process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education & Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking, Wuhan University of Science and Technology, Wuhan 430081, China

Department of Materials Science and Engineering, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden

Funding

Swedish Foundation for International Cooperation in Research and Higher Education · VINNOVA · SSF Strategic Mobility · Swedish Steel Producers’ Association (Jernkontoret) · Axel Ax:-son Johnsons forskningsfond, Prytziska fonden nr 2 · Gerhard von Hofstens Stiftelse för Metallurgisk forskning · National Natural Science Foundation of China · Japan Society for the Promotion of Science (JSPS)

References (32)

Show source-provided references
1. The effect of thermal cycling in superplastic diffusion bonding of heterogeneous duplex stainless steel10.1016/j.matdes.2016.01.147 ↗
2. High-temperature phase equilibria of duplex stainless steels assessed with a novel in-situ neutron scattering approach10.1007/s11661-016-3953-1 ↗
3. Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications10.1016/j.actamat.2014.12.012 ↗
4. Strengthening of AISI 2205 duplex stainless steel by strain ageing10.1016/j.matdes.2013.09.065 ↗
5. A statistical study on the effect of annealing temperature on pitting corrosion resistance of 2205 duplex stainless steel10.1016/j.corsci.2015.01.054 ↗
6. Studying the passivity and breakdown of duplex stainless steels at micrometer and nanometer scales–the influence of microstructure10.3389/fmats.2020.00133 ↗
7. Factors affecting and optimization methods used in machining duplex stainless steel-a critical review10.25103/jestr.142.16 ↗
8. Development of duplex stainless steels Compositions
9. A Comparative Study of Critical Pitting Temperature (CPT) of Super Duplex Stainless Steel S32707 in NaCl Solution10.20964/2018.05.173 ↗
10. Super duplex stainless steels10.1179/mst.1992.8.8.685 ↗
11. The effect of cooling rate on the solidification and microstructure evolution in duplex stainless steel: A DSC study10.1007/s10973-012-2370-y ↗
12. Influence of cooling rate on microstructure evolution and pitting corrosion resistance in the simulated heat-affected zone of 2304 duplex stainless steels10.1016/j.corsci.2012.01.018 ↗
13. Effect of cooling rate on the corrosion behavior of as-cast SAF 2205 duplex stainless steel after solution annealing treatment10.1590/1516-1439.352114 ↗
14. Mechanism of δ→ δ+ γ phase transformation and hardening behavior of duplex stainless steel via sub-rapid solidification process10.1016/j.matchar.2020.110679 ↗
15. Effect of carbon content on the potency of the intragranular ferrite formation10.1002/srin.201500043 ↗
16. Kinetics of peritectic reaction and transformation in Fe-C alloys10.1007/s11663-000-0074-3 ↗
17. In Situ Observation of Solidification and Crystallization of Low-Alloy Steels: A Review10.3390/met13030517 ↗
18. Microstructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates10.1007/s10853-015-9565-0 ↗
19. Influences of cooling rates on delta ferrite of nuclear power 316H austenitic stainless steel10.1016/j.matchar.2021.111029 ↗
20. Effect of cooling rate on solidification and segregation characteristics of 904L super austenitic stainless steel10.1007/s12540-021-01091-7 ↗
21. Effects of heating and cooling rates on δ↔ γ phase transformations in duplex stainless steel by in situ observation10.1080/03019233.2017.1370232 ↗
22. Wang, T. (2019). The Effects of Cooling Rate and Alloying Elements on the Solidification Behaviour of Continuously Cast Super-Austenitic and Duplex Stainless Steels. [Master’s Thesis, University of Wollongong].
23. In-situ observation of δ↔ γ phase transformations in duplex stainless steel containing different nitrogen contents10.2355/isijinternational.ISIJINT-2017-125 ↗
24. Effect of cooling rate after heat treatment on pitting corrosion of super duplex stainless steel UNS S 3275010.1108/ACMM-05-2018-1939 ↗
25. Wang, Y., Sukenaga, S., Shibata, H., Wang, Q., and Mu, W. (2023). Combination of in-situ confocal microscopy and calorimetry to investigate solidification of super and hyper duplex stainless steels. Steel Res. Int., in press.10.1002/srin.202370111 ↗
26. Combination of in situ microscopy and calorimetry to study austenite decomposition in inclusion engineered steels10.1002/srin.201500008 ↗
27. Effect of cooling rate on microsegregation during solidification of superalloy INCONEL 718 under slow-cooled conditions10.1007/s11663-018-1169-z ↗
28. In situ observation of growth behavior and morphology of delta-ferrite as function of solidification rate in an AISI304 stainless steel10.1016/S1006-7191(06)62085-1 ↗
29. Wang, T., Wexler, D., Guo, L., Wang, Y., and Li, H. (2022). In situ observation and phase-field simulation framework of duplex stainless-steel slab during solidification. Materials, 15.10.3390/ma15165517 ↗
30. Christian, J.W. (2002). The Theory of Transformations in Metals and Alloys, Newnes.10.1016/B978-008044019-4/50022-2 ↗
31. On the validity of Avrami formalism in primary crystallization10.1063/1.2337407 ↗
32. New insights of the nucleation and subsequent phase transformation in duplex stainless steel10.1016/j.matchar.2023.113115 ↗