Calibration Technique for MBE Growth of Long Wavelength InAlAs/InGaAs Quantum Cascade Lasers
Source abstract
Abstract
In this paper, we present the methodology for precise calibration of the Molecular Beam Epitaxy (MBE) growth process and achieving run-to-run stability of growth parameters. We present the analysis of the influence of fluxes stability during the growth of long wavelength quantum cascade laser structures designed for the range λ ~ 12–16 µm on wavelength accuracy with respect to desired emission wavelength. The active region of the lasers has a complex structure of nanometer thickness InxGa1−xAs/InyAl1−yAs superlattice. As a consequence, the compositional and thickness control of the structure via bulk growth parameters is rather difficult. To deal with this problem, we employ a methodology based on double-superlattice test structures that precede the growth of the actual structures. The test structures are analyzed by High Resolution X-ray Diffraction, which allows calibration of the growth of the complex active region of quantum cascade laser structures. We also theoretically studied the effect of individual flux changes on the emission wavelength and gain parameters of the laser. The results of simulations allow for the determination of flux stability tolerance, preserving acceptable parameters of the laser and providing means of emission wavelength control. The proposed methodology was verified by the growth of laser structures for emission at around 13.5 μm.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Spectroscopy and Laser Applications · Atmospheric Ozone and Climate · Atmospheric and Environmental Gas Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Łukasiewicz Research Network-Institute of Microelectronics and Photonics, Al. Lotników 32/46, 02-668 Warszawa, Poland
Funding
National Science Centre
References (21)
Show source-provided references
1. Quantum cascade lasers in chemical physics10.1016/j.cplett.2009.12.073 ↗
2. Quantum-cascade lasers operating in continuous-wave mode above 90 °C at λ ~ 5.25 µm10.1063/1.2171476 ↗
3. High-power λ ~ 9.5 µm quantum-cascade lasers operating above room temperature in continuous-wave mode10.1063/1.2180873 ↗
4. Temperature-insensitive long-wavelength (λ ~ 14 μm) Quantum Cascade lasers with low threshold10.1364/OE.19.008297 ↗
5. 14 μm quantum cascade lasers based on diagonal transition and nonresonant extraction10.1364/PRJ.7.001244 ↗
6. Extremely high T0-values (~450 K) of long-wavelength ~ 15 μm, low-threshold-current-density quantum-cascade lasers based on the indirect pump scheme10.1063/1.3518487 ↗
7. Sub-ppb detection of benzene using cantilever-enhanced photoacoustic spectroscopy with a long-wavelength infrared quantum cascade laser10.1364/OL.405402 ↗
8. MBE growth and optimization of the InGaAs/InAlAs materials system for quantum cascade laser10.3389/fmats.2022.1050205 ↗
9. MOVPE growth of LWIR AlInAs/GaInAs/InP quantum cascade lasers: Impact of growth and material quality on laser performance10.1109/JSTQE.2017.2677899 ↗
10. Growth of InGaAs/InAlAs superlattices for strain balanced quantum cascade lasers by molecular beam epitaxy10.1016/j.jcrysgro.2023.127233 ↗
11. Measurement of GaAs surface oxide desorption temperatures10.1063/1.97824 ↗
12. Long wavelength (λ > 13 μm) quantum cascade laser based on diagonal transition and three-phonon-resonance design10.1063/5.0066474 ↗
13. ErwinJr (2023, July 28). Open Source Code for QCL Modeling. Available online: https://code.google.com/archive/p/erwinjr/.
14. High-power λ ~ 8 μm quantum cascade lasers with near optimum performance10.1063/1.121569 ↗
15. Intersubband linewidths in quantum cascade laser designs10.1063/1.2993212 ↗
16. On the determination of the structural parameters of GaxIn1−xAs/AlAsySb1−y superlattices by X.-ray diffraction10.1016/j.jcrysgro.2006.09.044 ↗
17. Adachi, S. (2009). Properties of Semiconductor Alloys: Group-IV, III–V and II–VI Semiconductors, John Wiley & Sons, Ltd.10.1002/9780470744383 ↗
18. Origin of oval defects in GaAs layers grown by molecular beam epitaxy10.1016/0022-0248(85)90337-9 ↗
19. Gutowski, P., Sankowska, I., Słupiński, T., Pierścińska, D., Pierściński, K., Kuźmicz, A., Gołaszewska-Malec, K., and Bugajski, M. (2019). Optimization of MBE Growth Conditions of In0.52Al0.48As Waveguide Layers for InGaAs/InAlAs/InP Quantum Cascade Lasers. Materials, 12.10.20944/preprints201905.0081.v1 ↗
20. MBE growth of strain-compensated InGaAs/InAlAs/InP quantum cascade lasers10.1016/j.jcrysgro.2017.02.031 ↗
21. Mid-IR quantum cascade lasers: Device technology and non-equilibrium Green’s function modeling of electro-optical characteristics10.1002/pssb.201350322 ↗