journal article·2022-08-18Open access

Effect of Ultrasonic Degassing on Mg-Ca Binary Alloy by Ultrasonic Treatment

Zheng Jia, Bing Yu, Li Fu

Crystals· Volume 12· Issue 8

Abstract

The effect of ultrasonic treatment parameters, including ultrasonic treatment duration, frequency resonance, and treatment temperature, on the degassing of Mg-3.03Ca alloys was investigated. The results indicated that the optimum degassing efficiency could be obtained under the ultrasonic resonant condition. When applying ultrasonic treatment for 90 s with 150 W at 700 °C, the minimum hydrogen content and the highest degassing efficiency are obtained, respectively (42.8 cm3/100 g and 27.5%). The ultrasonic treatment can remove the gas from the melt and refine the microstructures. Finally, the mechanism of ultrasonic degassing and refinement was analyzed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical Engineering, Shenyang University, Shenyang 110044, China

Funding

The Key Project of the Education Department of Liaoning Province · China Postdoctoral Fund · Liaoning Province Doctor Start Fund Project

References (23)

Show source-provided references
1. Liu, J., Sun, J., Chen, Q., and Lu, L. (2022). Intergranular Cracking in Mg-Gd-Y Alloy during Tension Test. Crystals, 12.10.3390/cryst12081040 ↗
2. Achieving high strength-ductility synergy in dilute Mg-Al-Ca alloy by trace Ce addition10.1016/j.jallcom.2022.165407 ↗
3. Effect of rare earth element on amorphization and deformation behavior of crystalline/amorphous dual-phase Mg alloys10.1016/j.matdes.2022.110979 ↗
4. Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility10.1016/j.jma.2022.04.002 ↗
5. A high performance Mg–Al–Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity10.1016/j.msea.2022.143500 ↗
6. A novel process for grain refinement of Mg-RE alloys by low frequency electro-magnetic stirring assisted near-liquidus squeeze casting10.1016/j.jmatprotec.2022.117537 ↗
7. Effect of low cast-rolling speeds on the microstructure and mechanical properties of twin-roll casting high Mg AA5059 alloy sheets10.1016/j.jmrt.2022.05.078 ↗
8. Hydrogen inhibition of sodium alginate and sodium phosphate on waste magnesium alloy dust particles: A new suppression method for magnesium alloy waste dust10.1016/j.jlp.2022.104753 ↗
9. Enhancing hydrogen storage performance via optimizing Y and Ni element in magnesium alloy10.1016/j.jma.2021.11.026 ↗
10. Progress in Measuring Method to Hydrogen Content in Al and Mg Alloy
11. Preparation and wear properties of TiB2/Al-30Si composites via in-situ melt reactions under high-energy ultrasonic field10.1016/S1003-6326(14)63548-2 ↗
12. A hollow exponential ultrasonic horn for aluminum melt degassing under power ultrasound and rotating flow field10.1016/j.rinp.2021.103822 ↗
13. Effect of ultrasonic melt treatment conditions on melt quality of Al–Mg alloy10.1016/j.jmrt.2022.06.039 ↗
14. High speed imaging and numerical simulations of cavitation characteristic during the spreading of GaIn melt under ultrasonication10.1016/j.ijmecsci.2022.107221 ↗
15. Solidification behavior and microstructure evolution of Nb-Si-Mo alloy in ultrasonic field10.1016/j.ijrmhm.2022.105933 ↗
16. Understanding dual-frequency ultrasonic melt treatment on grain refinement and mechanical properties improvement of AZ80 magnesium alloy: Experiment and simulation10.1016/j.jmrt.2021.10.083 ↗
17. In-situ observations of melt degassing and hydrogen removal enhanced by ultrasonics in underwater wet welding10.1016/j.matdes.2020.108482 ↗
18. Optimizing high-volume ultrasonic melt degassing using synchronized kinematic translation10.1016/j.jmrt.2021.08.098 ↗
19. Abramov, O.V. (1994). Ultrasound in Liquid and Solid Metals [M], CRC Press.
20. Effects of ultrasonic field and vacuum on degassing of molten aluminum alloy10.1016/j.matlet.2006.07.012 ↗
21. Degassing of molten aluminum A356 alloy using ultrasonic vibration10.1016/j.matlet.2004.02.055 ↗
22. Degassing effect of ultrasonicvibration in molten melt andsemi-solid slurry of Al-Si alloys
23. Microstructure andproperty of rheocasting aluminum-alloy made with indirectultrasonic vibration process10.1016/j.matlet.2012.01.040 ↗