The Effect of Solution Treatment on the Microstructure and Properties of AlCuCrFe2NiTi0.25 High-Entropy Hardfacing Alloy
Source abstract
Abstract
With the advancement of modern social science and technology, alloys composed solely of a single principal component are gradually unable to meet people’s needs. The concept of a new type of high-entropy alloy has been proposed. At present, high-entropy alloys are mostly prepared by vacuum arc furnace melting and casting methods. To improve this situation, this article uses plasma welding technology to prepare an AlCuCrFe2NiTi0.25 high-entropy alloy on a Q235 steel plate through multi-layer and multi-pass welding using plasma surfacing technology and adopts an appropriate solution treatment on this basis to obtain a higher-performance alloy. The conclusion drawn from different heat treatment processes is as follows: solution treatment was performed on an AlCuCrFe2Ni0.25 high-entropy alloy at a temperature of 1200 °C for 2 h, 3 h, and 4 h, respectively. After XRD phase analysis, it was found that the phase types of high-entropy alloys did not change after solution treatment. As the solution time increased, the diffraction peak intensity of the Laves phase gradually decreased. After 3 h of solid solution treatment, room temperature tensile tests were conducted to obtain the tensile strength and elongation of the AlCuCrFe2Ni0.25 high-entropy alloy at room temperature, which were 509 MPa and 23.8%, respectively, exhibiting the optimal comprehensive mechanical properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shenyang Machine Tool Factory, Shenyang 110142, China
College of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870, China
References (21)
Show source-provided references
1. Microstructure and mechanical properties of multi-phase reinforced Hf-Mo-Nb-Ti-Zr refractory high-entropy alloys10.1016/j.ijrmhm.2021.105723 ↗
2. Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes10.1002/adem.200300567 ↗
3. In-situ Ti (C, N) reinforced AlCoCrFeNiSi-based high entropy alloy coating with functional gradient double-layer structure fabricated by laser cladding10.1016/j.jallcom.2021.161252 ↗
4. A review on mechanical alloying and spark plasma sintering of refractory high-entropy alloys: Challenges, microstructures, and mechanical behavior10.1016/j.jmrt.2024.03.205 ↗
5. Study on the wear resistance and mechanism of AlCrCuFe2NiTix high-entropy surfacing alloys10.1016/j.jallcom.2023.172510 ↗
6. corrosion wear and lubricating mechanisms of WC particles reinforced FeCoCrNiMn high entropy alloys coatings10.1016/j.ceramint.2024.05.362 ↗
7. Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2016.05.034 ↗
8. Surface strengthening of Ni32-xCo30Cr10Fe10Al18Tix eutectic high-entropy alloys by laser remelting and heat treatment10.1007/s00339-022-06073-z ↗
9. The Effects of carbon on the phase stability and mechanical properties of heat-treated FeNiMnCrAl high entropy alloys10.1016/j.msea.2019.01.083 ↗
10. A mortise-and-tenon structure inspired high strength-ductility 3D printed high-entropy alloys with mechanically interlocked network10.1016/j.msea.2024.146422 ↗
11. Microstructures and properties of FeCrAlMoSix high entropy alloy coatings prepared by laser cladding on a titanium alloy substrate10.1016/j.surfcoat.2024.130437 ↗
12. Effect of Ti addition on the microstructure and property of FeAlCuCrNiMo0.6 high-entropy alloy10.1007/s40195-020-01019-x ↗
13. CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment10.1016/j.matlet.2016.11.026 ↗
14. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
15. Effects of electro-negativity on the stability of topologically close-packed phase in high entropy alloys10.1016/j.intermet.2014.04.001 ↗
16. Effect of Ti addition on the microstructure and properties of AlCrCuFeNi alloy10.1088/2053-1591/aaeef0 ↗
17. Effects of heat treatment on the precipitation behaviors and mechanical properties of Nb-doped CrMnFeCoNi0.8 high-entropy alloy10.1016/j.msea.2023.145611 ↗
18. In-situ TiC reinforced CoCrCuFeNiSi0.2 high-entropy alloy coatings designed for enhanced wear performance by laser cladding10.1016/j.matchemphys.2019.122522 ↗
19. Phase inversion in a two-phase, BCC+B2, refractory high entropy alloy10.1016/j.actamat.2019.12.004 ↗
20. High-strength AlCoCrFeNi2.1 eutectic high entropy alloy skeleton with hollow brick wall structures by selective laser melting10.1016/j.msea.2023.145757 ↗
21. Mechanical-thermal coupling structural failure and in-situ deformation mechanism of cellular high entropy alloy lattice structures10.1016/j.jmrt.2023.12.215 ↗