journal article·2013-11

Comparison of D.C. and A.C. electro-analytical methods for measuring diode ideality factors and series resistances of silicon solar cells

D.J. Crain, S.E. Rock, J.E. Garland, D. Roy

Current Applied Physics· Volume 13· Issue 9
Publisher page

Abstract

Abstract The diode ideality factor ( m ) and the series resistance ( R s ) of a Si solar cell represent two critical performance-indicator parameters of the device. Since both m and R s are functions of voltage ( V ) and temperature ( T ), simultaneous electrical measurements of these parameters under variable conditions of V and T can often be difficult with traditional direct current (D.C.) techniques. Using the electro-analytical method of linear sweep voltammetry (LSV) and a commonly available Si solar cell, we explore these specific confines of such D.C. measurements. The results are compared with those obtained from a parallel set of alternating current (A.C.) measurements using impedance spectroscopy (IS). LSV provides the main D.C. parameters (open circuit voltage, short circuit current, fill factor, and efficiency) of the cell, but is limited in terms of independently measuring m and R s beyond strong forward biased conditions. The IS approach is free of the latter experimental constraints, and at the same time can provide several other important electrical parameters of the solar cell. Specifically, IS detects the presence of a low-high (p–p + ) junction at the back surface of the cell, and serves as an efficient probe of certain electrical characteristics of this junction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Semiconductor materials and interfaces · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Advances in crystalline silicon solar cell technology for industrial mass production10.1038/asiamat.2010.82 ↗
2. The impact of silicon feedstock on the PV module cost10.1016/j.solmat.2009.10.011 ↗
3. Crystalline silicon solar cells: State-of-the-art and future developments
4. Pilot line processing of silicon wafer solar cells using industry-scale equipment10.1016/j.egypro.2012.02.006 ↗
5. Novel front and back side screen designs for improved cost/performance ratio10.1016/j.egypro.2011.06.192 ↗
6. Direct laser printing for high efficiency silicon solar cells fabrication10.1016/j.apsusc.2010.11.015 ↗
7. Chemical treatment of crystalline silicon solar cells as a method of recovering pure silicon from photovoltaic modules10.1016/j.renene.2009.11.031 ↗
8. Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser10.1016/j.optlastec.2010.01.013 ↗
9. New processes for the production of solar-grade polycrystalline silicon: a review10.1016/j.solmat.2007.10.003 ↗
10. Multicrystalline silicon wafers prepared from upgraded metallurgical feedstock10.1016/j.solmat.2008.04.020 ↗
11. Optical properties and chemical bonding characteristics of amorphous SiNX: H thin films grown by the plasma enhanced chemical vapor deposition method10.1016/j.jnoncrysol.2011.10.016 ↗
12. Impedance spectroscopy characterisation of highly efficient silicon solar cells under different light illumination intensities10.1039/b812468j ↗
13. Effect of temperature dependence of band gap and device constant on I–V characteristics of junction diode10.1016/S0038-1101(01)00139-3 ↗
14. Impedance spectroscopy coupled with voltammetry for quantitative evaluation of temperature and voltage dependent parameters of a silicon solar cell10.1016/j.solener.2011.08.029 ↗
15. Electro-analytical characterization of photovoltaic cells by combining voltammetry and impedance spectroscopy: Voltage dependent parameters of a silicon solar cell under controlled illumination and temperature10.1039/C0EE00307G ↗
16. Effect of solar array capacitance on the performance of switching shunt voltage regulator10.1109/TPEL.2005.869779 ↗
17. Review and test of methods for determination of the solar cell series resistance10.1016/0960-1481(94)E0021-V ↗
18. Method for analyzing series resistance and diode quality factors from field data Part II: applications to crystalline silicon10.1016/S0927-0248(99)00067-7 ↗
19. Analysis of series resistance and P–T characteristics of the solar cell10.1016/j.vacuum.2004.08.019 ↗
20. Temperature dependence of I–V characteristics and performance parameters of silicon solar cell10.1016/j.solmat.2008.07.010 ↗
21. Crystalline silicon cell performance at low light intensities10.1016/j.solmat.2009.03.018 ↗
22. Temperature dependence of solar cell performance – an analysis10.1016/j.solmat.2012.02.019 ↗
23. A method for the direct measurement of the solar cell junction ideality factor10.1016/0379-6787(87)90066-4 ↗
24. Review and tests of methods for the determination of the solar cell junction ideality factors10.1016/j.solener.2006.11.002 ↗
25. Overcoming the problems in determination of solar cell series resistance and diode factor10.1088/0022-3727/23/9/019 ↗
26. Quantitative characterization of silicon solar cells in the electro-analytical approach: combined measurements of temperature and voltage dependent electrical parameters10.1039/C1AY05455D ↗
27. Green · 1982
28. Goetzberger · 1998
29. Sze · 1981
30. Analysis of the temperature dependence of the open-circuit voltage10.1016/j.egypro.2012.07.041 ↗
31. Solar cell fill factors: general graph and empirical expressions10.1016/0038-1101(81)90062-9 ↗
32. Dark I–U–T measurements of single crystalline silicon solar cells10.1016/j.enconman.2004.08.004 ↗
33. Serway · 1998
34. Gettering effects by aluminum upon the dark and illuminated I–V characteristics of N+–P–P+ silicon solar cells10.1016/S0927-0248(99)00158-0 ↗
35. Temperature dependence of shunt resistance in photovoltaic devices10.1063/1.97076 ↗
36. Measurement of solar cell parameters with dark forward I–V characteristics10.14311/850 ↗
37. Low temperature back-surface-field contacts deposited by hot-wire CVD for heterojunction solar cells10.1016/j.tsf.2007.12.020 ↗
38. Effects of back surface textures on contact formation and solar cell performance10.1149/1.3272641 ↗
39. Effects of controllable process factors on Al rear surface bumps in Si solar cells10.1016/j.cap.2011.04.021 ↗
40. Investigation of thin aluminium films on the rear of monocrystalline silicon solar cells for back surface field formation
41. Measurement of bulk and rear recombination components and application to solar cells with an Al back layer10.1016/j.sse.2004.06.017 ↗
42. Effects of high temperature annealing of aluminum at the back of n+–p–p+ silicon solar cells upon their spectral and electrical characteristics10.1016/S0038-1101(99)00175-6 ↗
43. A simple theory of back surface field (BSF) solar cells10.1063/1.325262 ↗
44. Factors limiting the formation of uniform and thick aluminum-back-surface field and its potential10.1149/1.2129106 ↗
45. Electron tunneling in metal-semiconductor barriers10.1103/PhysRev.150.466 ↗
46. Bandgap narrowing in silicon solar cells considering the p-type doping material10.1016/S0038-1101(96)00127-X ↗
47. Temperature coefficient of resistance for p- and n-type silicon10.1016/0038-1101(78)90296-4 ↗
48. Coupled defect-level recombination: theory and application to anomalous diode characteristics10.1063/1.360007 ↗
49. Defect induced non-ideal dark – characteristics of solar cells10.1016/j.spmi.2008.10.025 ↗
50. Explanation of commonly observed shunt currents in c-Si solar cells by means of recombination statistics beyond the Shockley–Read–Hall approximation10.1063/1.3607310 ↗
51. Time determination in p/n junction diodes and solar cells from open-circuit-voltage decay including junction capacitance effects10.1016/0038-1101(87)90176-6 ↗
52. Measurement of solar cell parameters using impedance spectroscopy10.1016/0927-0248(95)00153-0 ↗
53. Silicon (BSFR) solar cell AC parameters at different temperatures10.1016/j.solmat.2004.05.017 ↗
54. Modeling of minority-carrier surface recombination velocity at low-high junction of an n+–p–p+ silicon diode10.1109/16.69915 ↗