Microstructures and nano mechanical properties of the metal tungsten film
Source abstract
Abstract
Abstract The W film was prepared on 1045 steel by magnetron sputtering, with the thickness of 2 μm, its surface and cross-section morphologies were investigated with SEM, and the phase structure was analyzed with XRD. X-ray stress determinator was utilized to measure its residual stress, and the nano-hardness and elastic modulus of the film were surveyed by nano-indentation tester. The results show that the surface of W film is very compact and smooth; the particles arranged regularly, the granularity of the thin film is about 1 μm. The microcracks, cavities and desquamation were not found in the film and interface, and the bonding between the W film and substrate is well. The XRD results showed that the W film had a body-centered cubic structure, the lattice constant: a = 0.316 nm, the growth preferred orientations are (1 1 0) and (2 2 0). The compressive stress (−169 MPa) was found on the surface. The average nano-hardness and elastic modulus of W film are 15.22 GPa, 176.64 GPa, respectively, and the mechanical properties of W film are well.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Properties of zirconia thin films prepared by reactive magnetron sputtering10.1016/j.matlet.2006.04.108 ↗
2. Reactive gas effects in pulsed magnetron sputtering: time-resolved investigation10.1016/j.surfcoat.2006.08.003 ↗
3. High-rate deposition of copper thin films using newly designed high-power magnetron sputtering source10.1016/j.surfcoat.2004.07.005 ↗
4. Enhancement of adhesion strength and tribological performance of pure carbon coatings on biomaterials with ion implantation pre-treatments10.1016/j.triboint.2005.09.019 ↗
5. Tribological behavior of a TiSiCN coating tested in air and coolant10.1016/j.surfcoat.2006.08.066 ↗
6. Interfacial characteristic of graded hydroxyapatite and titanium thin film by magnetron sputtering
7. Nanoindentation characterization of ZnO thin films10.1016/j.msea.2006.05.106 ↗
8. Microstructure, mechanical properties, and wetting behavior of Si–C–N thin films grown by reactive magnetron sputtering10.1016/S0257-8972(01)01236-1 ↗
9. Hydrogenation of Pd capped Mg thin films at room temperature10.1016/j.susc.2004.06.115 ↗
10. Structure and high-temperature tribological behavior of Ti–Si–C nanocomposite thin films10.1016/j.surfcoat.2004.12.011 ↗
11. Residual stress characterization of diamond-like carbon coatings by an X-ray diffraction method10.1016/S0257-8972(99)00298-4 ↗
12. Residual stress control in MoCr thin films deposited by ionized magnetron sputtering10.1016/j.surfcoat.2005.11.104 ↗
13. Ion bombardment: a means to improve the properties of TiN/AlN multilayered coatings10.1016/S0257-8972(03)00358-X ↗
14. Microstructure and nano-indentation hardness of Ti/TiN multilayered films10.1016/S0257-8972(00)01096-3 ↗