journal article·2025-01-15Open access

Study regarding the compatibility between cellulose acetate (CA) and ZnO nanoparticles in polymeric membrane structures using functionalized m-phenylenediamine

Petroleum-Gas University of Ploieşti, Faculty of Petroleum Refining and Petrochemistry, Ploieşti, M. Băjan, D. L. Cursaru, Petroleum-Gas University of Ploieşti, Faculty of Petroleum Refining and Petrochemistry, Ploieşti

Abstract

This study examines the effects of functionalized m-phenylenediamine (m-PDA-f) on the structure of cellulose acetate (CA) polymeric membranes enhanced with zinc oxide nanoparticles (ZnO). The membranes were prepared by dissolving cellulose acetate in an aprotic solvent, followed by a phase inversion process. The addition of m-PDA-f facilitates the formation of bridges between the cellulose acetate and ZnO nanoparticles. This is confirmed by FTIR analysis, which reveals a shift in the wavenumber of 3 to 5 cm⁻¹, highlighting an increase in the number of hydrogen bonds formed. Thermogravimetric analysis (TGA) confirms the enhanced stability of the membranes, with a significant increase in the thermal decomposition temperature: from 235 °C for pure cellulose acetate to 285 °C for the composite containing ZnO and the functionalized polymer. Differential scanning calorimetry (DSC) reveals lower enthalpy values for the membranes where mPDA-f is present alongside ZnO. Furthermore, the best hydrophilicity was observed in the CA – m-PDA-f – ZnO membranes, exhibiting a contact angle of 34 degrees for water droplets, compared to 51 degrees for the membrane without the functionalized polymer. This demonstrates an increase in compatibility between the polymer and the nanomaterial through the formation of additional stable bonds.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Synthesis and properties of polymers · Advanced Polymer Synthesis and Characterization · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. [1] Shi X., Mao D., Song K., Xiang H., Li S., Wang Z., Xinying S., Mao D., Water Research 260, 2024;121946; https://doi.org/10.1016/j.watres.2024.12194610.1016/j.watres.2024.121946 ↗
2. [2] Ighalo J. O., Yap P. S., Iwuozor K.O., Aniagor O. C., Liu T., Dulta K., Felicitas U. Iwuchukwu F. U., Rangabhashiyam S., Environmental Research, 2022;212:113123; https://doi.org/10.1016/j.envres.2022.11312310.1016/j.envres.2022.113123 ↗
3. [3] Baig U., Faizan M., Waheed A., Advances in Colloid and Interface Science; 2022;303:102635. https://doi.org/10.1016/j.cis.2022.10263510.1016/j.cis.2022.102635 ↗
4. [4] Liu J., Zhang R., Wang L., Liu Y., Tian X., Dai X., Pan J., Dai J., Separation and Purification Technology, 2023;319:124051; https://doi.org/10.1016/j.seppur.2023.12405110.1016/j.seppur.2023.124051 ↗
5. [5] Burugaa K., Songb H., Shangc J., Boland N., Kalathia J. T., Kimd KI., Journal of Hazardous Materials, 2019;379:120584; https://doi.org/10.1016/j.jhazmat.2019.04.06710.1016/j.jhazmat.2019.04.067 ↗
6. [6] He H., Shen X., Nie Z., Progress in Polymer Science, 2023;143:101710; https://doi.org/10.1016/j.progpolymsci.2023.10171010.1016/j.progpolymsci.2023.101710 ↗
7. [7] Mo J., Li X., Yang Z., Separation and Purification Technology, 2024;345;127366. https://doi.org/10.1016/j.seppur.2024.12736610.1016/j.seppur.2024.127366 ↗
8. [8] Darabi R.R., Peyravi M., Jahanshahi M., Chemical Engineering Research and Design, 2019;145;85-98; https://doi.org/10.1016/j.cherd.2019.02.01910.1016/j.cherd.2019.02.019 ↗
9. [9] Mousa H., El-Hay S.S.A., Sheikh R.E., Gouda A.A., El-Ghaffar S.A., El-Aal M.A., International Journal of Biological Macromolecules, 2024;258;128890; https://doi.org/10.1016/j.ijbiomac.2023.12889010.1016/j.ijbiomac.2023.128890 ↗
10. [10] Amer I., Mokrani T., Jewell L., Young D.A., Vosloo H.C.M., Polymer, 2015;66;230-239; https://doi.org/10.1016/j.heliyon.2022.e1240110.1016/j.heliyon.2022.e12401 ↗
11. [11] Hu C.H., Weber M., Huang Y.H., Lai J.Y., Chung T.S., Journal of Membrane Science, 2024;705;122890; https://doi.org/10.1016/j.memsci.2024.122890;10.1016/j.memsci.2024.122890 ↗
12. [12] Svoboda J., Kral M., Dendisova M., Matˇejka P., Georgievski O.P., Colloids and Surfaces B: Biointerfaces, Colloids and Surfaces B: Biointerfaces, 2021;205;111897; https://doi.org/10.1016/j.colsurfb.2021.11189710.1016/j.colsurfb.2021.111897 ↗
13. [13] Algahtani F.D., Laput V., Atique S., Hamdi A., Snoussi M., Zrieq R., El-Morsy M.A., Materials Chemistry and Physics, 2024;323;129605; https://doi.org/10.1016/j.matchemphys.2024.12960510.1016/j.matchemphys.2024.129605 ↗
14. [14] Mousa H., El-Hay S.S.A., El Sheikh R., Gouda A.A., El-Ghaffar S.A., El-Aal M.A., International Journal of Biological Macromolecules, 2024;258;128890; https://doi.org/10.1016/j.ijbiomac.2023.12889010.1016/j.ijbiomac.2023.128890 ↗
15. [15] Alhalili Z., Romdhani C., Chemingui H., Smiri M., Journal of Saudi Chemical Society, 2021, 25, 101282; https://doi.org/10.1016/j.jscs.2021.101282 11210.1016/j.jscs.2021.101282 ↗
16. [16] Alahmadi N., Hussein M.A., Journal of materials research and technology 2022;21;4409- 4418; https://doi.org/10.1016/j.jmrt.2022.11.05510.1016/j.jmrt.2022.11.055 ↗
17. [17] Ali M., Zafar M., Jamil T., Butt M. T. Z., Desalination, 270;2011;98-104; https://doi.org/10.1016/j.desal.2010.11.02710.1016/j.desal.2010.11.027 ↗
18. [18] Taib M. N. A. M., Hamidon T. S., Garba N. Z., Trache D., Uyama H., Hussin M. H., Polymer, 244;2022;124677; https://doi.org/10.1016/j.polymer.2022.12467710.1016/j.polymer.2022.124677 ↗
19. [19] Maurya K.R.A., Chikkattib S.B., Sajjanb M. A., Banapurmathc R. N., Khand T.M.Y., Saleeld C. A., Next Energy; https://doi.org/10.1016/j.nxener.2024.10017810.1016/j.nxener.2024.100178 ↗
20. [20] Elaissaoui I., Sayeb S., Ounif I., Ferhi M., Karima H., Ennigrou D. J., Heliyon, 10;2024;e32552; https://doi.org/10.1016/j.heliyon.2024.e3255210.1016/j.heliyon.2024.e32552 ↗