Modeling and Performance Improvement of Organic Tandem Solar Cells Using SCAPS-1D Simulator
Source abstract
Abstract
This study presents a simulation-based optimization of a two-terminal (2 T) all-polymer tandem solar cell using SCAPS-1D. The structure incorporates PM7:PIDT as the top sub-cell and PM6:PY-IT as the bottom sub-cell. Two key optimization strategies were investigated to enhance device performance. The first involved adjusting the top absorber’s thickness and defect concentration, with optimal values of 200 nm and 1011 cm−3, respectively. This configuration yielded a Jsc of 15.1 mA cm−2, Voc of 2.11 V, FF of 76.7%, and a PCE of 24.5%. The second strategy focused on interfacial engineering by replacing the electron transport layers: TiO2 was used in the bottom cell and PDINN in the top cell, resulting in Jsc = 11.77 mA cm−2, Voc = 2.34 V, FF = 83.0%, and PCE = 22.8%. Both approaches outperformed the unoptimized reference device (PCE = 17.2%) and surpassed reported experimental benchmarks (∼17.6%). The thickness-defect optimization alone led to a PCE gain of nearly 9%, underlining the importance of finely tuning material parameters and structure. These findings demonstrate the strong potential of all-polymer tandem solar cells for future flexible and lightweight photovoltaic applications, while offering valuable design guidelines for experimental implementation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. The numerical simulation of a non-fullerene thin-film organic solar cell with Cu2FeSnS4 (CFTS) kesterite as a hole transport layer using SCAPS-1D10.3390/coatings15030266 ↗
2. Design and optimization of highly efficient perovskite/homojunction SnS tandem solar cells using SCAPS-1D10.1016/j.solener.2022.01.046 ↗
3. Enhancing organic solar cells through dual electron transport layers: a machine learning approach for prediction of organic and metal oxide electron transport layer compatibility10.1002/pssa.202500317 ↗
4. Proposal and design of flexible all-polymer/CIGS tandem solar cell10.3390/polym15081823 ↗
5. High-efficiency design and optimization of 2 T monolithic polymer/polymer tandem solar cells using SCAPS-1D simulations10.1088/1402-4896/adbe03 ↗
6. TCAD device simulation of all-polymer solar cells for indoor applications: potential for tandem vs single junction cells10.3390/polym15092217 ↗
7. Hybrid optimization approach using multiobjective genetic algorithm NSGA-II, SCAPS-1D simulation, and response surface methodology for organic solar cell analysis10.1002/pssa.202400654 ↗
8. Device performance of emerging photovoltaic materials (version 5)10.1002/aenm.202404386 ↗
9. Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses10.1093/nsr/nwad085 ↗
10. 17.87% efficiency all-polymer tandem solar cell enabled by complementary absorbing polymer acceptors10.1002/adfm.202210733 ↗
11. Recent developments in organic tandem solar cells toward high efficiency10.1002/aesr.202000050 ↗
12. High performance tandem organic solar cells via a strongly infrared-absorbing narrow bandgap acceptor10.1038/s41467-020-20431-6 ↗
13. Limiting efficiencies for photovoltaic energy conversion in multigap systems10.1016/0927-0248(96)00015-3 ↗
14. Quadruple junction polymer solar cells with four complementary absorber layers10.1002/adma.201803836 ↗
15. Advantages, challenges and molecular design of different material types used in organic solar cells10.1038/s41578-023-00618-1 ↗
16. Precisely controlling the position of bromine on the end group enables well-regular polymer acceptors for all-polymer solar cells with efficiencies over 15%10.1002/adma.202005942 ↗
17. Optimization of all Pb-free perovskite CsGeI3/FASnI3 tandem solar device with 30.42% efficiency: numerical simulation using SCAPS10.1016/j.ijleo.2024.171638 ↗
18. HTL-free non-toxic perovskite tandem solar device MAGeI3/FASnI3 with 25.69% efficiency: design and simulation using SCAPS10.1007/s12596-023-01647-3 ↗
19. DFT and SCAPS-1D simulation of single-layer and bilayer perovskite solar cells: Ca3 BiI3 and Sr3 BiI310.1088/1361-6641/ada17e ↗
20. DFT and SCAPS-1D modeling of Ba3BiI3 perovskite solar cells: exploring the influence of HTL and ETL materials10.1007/s10904-025-03686-8 ↗
21. Numerical optimization and efficiency analysis of Sn-based perovskite-on-silicon tandem solar cells with various TCO materials using SCAPS-1D simulation10.1063/5.0217477 ↗
22. Numerical analysis of high-efficiency chalcogenide perovskite solar cells (InBiSe3/GaBiSe3): study of single and bilayer configurations10.1002/pssa.202400780 ↗
23. Efficiency boosting of 4-T bifacial dual-textured perovskite/perl silicon tandem solar cells: process and device TCAD simulation study10.1007/s12633-024-03076-8 ↗
24. Silvaco simulation of single and bilayer Cs2 PtI6 and CsPbI3 perovskite solar cells10.1088/1402-4896/adedcf ↗
25. Optimization and efficiency enhancement of modified polymer solar cells10.20944/preprints202308.0912.v1 ↗
26. Investigation of lead-free MASnI3-MASnIBr2 tandem solar cell: numerical simulation10.1016/j.optmat.2021.111893 ↗
27. Design and optimization of non-toxic and highly efficient tin-based organic perovskite solar cells by device simulation10.1016/j.heliyon.2023.e19389 ↗
28. Thickness dependent numerical investigations of lead free perovskite/CIGS bilayer solar cell using SCAPS-1D10.1016/j.cinorg.2024.100034 ↗
29. All-inorganic perovskite photovoltaics for power conversion efficiency of 31%10.1038/s41598-023-42447-w ↗
30. Performance and optimization study of selected 4-terminal tandem solar cells10.1038/s41598-024-62085-0 ↗
31. Faculty of sciences, abou bekr belkaid university, 13000 tlemcen, Algeria et al. simulation study of CZTS/CZTSe tandem solar cell by using SCAPS-1D software10.21272/jnep.14(6).06033 ↗
32. TCAD-based design and optimization of flexible organic/Si tandem solar cells10.3390/cryst14070584 ↗
33. Bifacial perovskite solar cells with >21% efficiency: computational insights into novel HTLs materials and architectures10.1016/j.solener.2024.113083 ↗
34. Enhancing inverted perovskite solar cells: The role of o-OMe-PEAI interlayer in performance with MXene as alternative front contacts10.1016/j.inoche.2025.114096 ↗
35. Device modeling and optimization of lead-free perovskite/kesterite tandem solar cell through SCAPS-1D simulation10.2139/ssrn.4981039 ↗
36. Theoretical study of the impact of the D/A system polymer and anodic interfacial layer on inverted organic solar cells (BHJ) performance10.1016/j.optmat.2021.111588 ↗
37. An efficient all-perovskite two terminal monolithic tandem solar cell with improved photovoltaic parameters: a theoretical prospect10.1016/j.ijleo.2023.170821 ↗
38. Investigations aimed at producing 33% efficient perovskite–silicon tandem solar cells through device simulations10.1039/D1RA06250F ↗
39. An extensive study on multiple ETL and HTL layers to design and simulation of high-performance lead-free CsSnCl3-based perovskite solar cells10.1038/s41598-023-28506-2 ↗
40. Modeling of highly efficient and low cost CH3NH3Pb(I1-xClx)3 based perovskite solar cell by numerical simulation10.1016/j.optmat.2019.109631 ↗
41. Designing hole conductor free tin–lead halide based all-perovskite heterojunction solar cell by numerical simulation10.1016/j.jpcs.2021.110168 ↗
42. Numerical investigation of solar cells based on hybrid organic cation perovskite with inorganic HTL via SCAPS-1D10.1016/j.cjph.2021.12.024 ↗
43. Numerical simulation and optimization of physical properties for high efficiency CuSbS2 thin film solar cells10.1016/j.ijleo.2022.170233 ↗
44. Improved performance of CdTe thin-film solar cell through key parameters10.57647/J.JTAP.2024.1803.35 ↗
45. Enhancing the efficiency of CZTS Solar cells with dual HTL configuration and a novel buffer layer using SCAPS-1D10.1002/slct.202405753 ↗
46. Organic solar cells with efficiency of 17.6% and fill factor of 78.3% based on perylene-diimide derivative as cathode interface layer10.1016/j.cej.2022.136455 ↗
47. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
48. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
49. Toward perovskite solar cell commercialization: a perspective and research roadmap based on interfacial engineering10.1002/adma.201800455 ↗
50. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
51. Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells10.1038/s41467-023-36917-y ↗
52. Device performance of emerging photovoltaic materials (version 1)10.1002/aenm.202002774 ↗
53. Device performance of emerging photovoltaic materials (version 2)10.1002/aenm.202102526 ↗
54. Binary organic solar cells with 19.2% efficiency enabled by solid additive10.1002/adma.202301583 ↗