A Ballistic Transport Nanodevice Based on Graphene Nanoribbon FET by Enhanced Productivity for Both Low-Voltage and Radio-Frequency Scopes
Source abstract
Abstract
The top performance in both the low-voltage and radio frequency (RF) scopes has been nominated for an unique nanodevice made from a graphene nanoribbon with an extremely short gate length (7.5 nm) in this study. Two distinct material engineering options were used, yielding some interesting outcomes. Due to the use of an ultrascale GNRFET in this study, the band structure non-linearity in the Dirac point and the energy-position dependent effective mass model for dual material gate architectures were examined for the first time. The NEGF formalism is used to carry out both the low-voltage and RF research using a three-dimensional (3D) Poisson equation. Low-voltage high performance has been validated by monitoring the key parameters in the terms of on current (I on ), off current (I off ), I on to I off ratio, subthreshold swing, and drain induced barrier lowering (DIBL) for the proposed device as compared to other structures under the study. The RF performance is examined by evaluation of essential parameters in the cases of parasitic gate capacitance, intrinsic cut-off frequency, intrinsic delay time, and transconductance. Indeed, a device with a higher source side gate work function than it does on the drain side is proposed will shift the energy band from the device’s half to the drain electrode, altering carrier outflow. In addition, the performance of non-linearity and RF intermodulation distortion has been analyzed for all devices under investigation in order to attain the best attitude toward the suggested device in comparison to the other devices under investigation in this work.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Graphene research and applications · Advancements in Semiconductor Devices and Circuit Design · 2D Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. The impact of structural parameters on the electrical characteristics of GAA Silicon nanowire transistor10.1109/ISDRS.2009.5378017 ↗
2. Partially cylindrical fin field-effect transistor: a novel device for nanoscale applications10.1109/TDMR.2010.2046663 ↗
3. Improved device performance in nano scale transistor: an extended drain SOI MOSFET10.1149/2.0231607jss ↗
4. Improvement in electrical characteristics of Silicon on Insulator (SOI) transistor using graphene material10.1016/j.rinp.2019.102806 ↗
5. A tunnel diode body contact structure to suppress the floating-body effect in partially depleted SOI MOSFETs10.1109/LED.2011.2162813 ↗
6. Proper electrostatic modulation of electric field in a reliable nano-SOI with a developed channel10.1109/TED.2018.2808687 ↗
7. The electronic properties of graphene10.1103/RevModPhys.81.109 ↗
8. Two-dimensional gas of massless Dirac fermions in graphene10.1038/nature04233 ↗
9. Investigation of the width-dependent static characteristics of graphene nanoribbon field effect transistors using non-parabolic quantum-based model10.1016/j.sse.2015.05.003 ↗
10. Analysis of the metal work function dependence of charge transfer in contacted graphene nanoribbons10.5772/54995 ↗
11. Modeling of lightly doped drain and source graphene nanoribbon field effect transistors10.1016/j.spmi.2013.04.013 ↗
12. Theoretical analysis of a novel dual gate metal–graphene nanoribbon field effect transistor10.1016/j.mssp.2014.11.051 ↗
13. A novel graphene nanoribbon FET with an extra peak electric field (EFP-GNRFET) for enhancing the electrical performances10.1016/j.physleta.2017.02.032 ↗
14. ‘Dual metal gate tunneling field effect transistors based on MOSFETs: A 2-D analytical approach.’10.1016/j.spmi.2017.09.042 ↗
15. A quantum mechanical transport approach to simulation of quadruple gate silicon nanowire transistor10.1166/jnn.2011.3972 ↗
16. A scheme of quantum tunnel field effect transistor based on armchair graphene nano-ribbon10.1149/2162-8777/ac2329 ↗
17. A first-principles study of transport properties in armchair germanene nanoribbon field effect transistors subject to metallic dopants10.1149/2162-8777/ac26da ↗
18. Analysis and modeling of unipolar junction transistor with excellent performance: a novel DG MOSFET with N+-P-junction10.1007/s10825-018-1152-6 ↗
19. Top oxide thickness dependence of remote phonon and charged impurity scattering in top-gated graphene10.1063/1.4804432 ↗
20. MagneticTB: A package for tight-binding model of magnetic and non-magnetic materials10.1016/j.cpc.2021.108153 ↗
21. Tight-binding approach to pyrazine-mediated superexchange in copper–pyrazine antiferromagnets10.1021/acs.inorgchem.1c00532 ↗
22. Modeling edge effects in graphene nanoribbon field-effect transistors with real and mode space methods10.1063/1.3073875 ↗
23. Tight-binding and effective mass modeling of armchair graphene nanoribbon FETs10.1016/j.sse.2008.07.015 ↗
24. Datta · 2005
25. Mohammadi Banadaki · 2016
26. Design and self-consistent schrodinger-poisson model simulation of ultra-thin Si-channel nanowire FET10.1007/s12633-021-01388-7 ↗
27. Conductance of graphene nanoribbon junctions and the tight binding model10.1007/s11671-010-9791-y ↗
28. Impact of high-doped pockets on the performance of tunneling CNTFET10.1016/j.spmi.2020.106622 ↗
29. RF & linearity distortion sensitivity analysis of DMG-DG-Ge pocket TFET with hetero dielectric10.1016/j.mejo.2020.104973 ↗
30. Linearity and reliability analysis of an electrically doped hetero material nanowire TFET10.1007/s11664-020-08143-5 ↗
31. RF-CMOS performance trends10.1109/16.936707 ↗