Influence of Processing Experimental Parameters of PEDOT: PSS on the Photovoltaic Performance on CdTe Solar Cells
Source abstract
Abstract
Hybrid CdTe solar cells including the organic polymer poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) in the typical structure were fabricated. PEDOT:PSS was added as a p+ region in the structure of solar cells after CdTe deposition and before the processing of the Cu–Mo back contact and was compared with a CdTe reference solar cells without polymer. The PEDOT:PSS was deposited at different rotational speeds of 3000 to 6000 rpm for 30 s, by spin coating technique. The obtained thicknesses were around 20–40 nm. Adequate coverage of the CdTe surface and grain morphology was obtained, when the polymer was deposited at 5000 rpm of rotational speed this according to Scanning Electron Microscope measurements. The final structure of the solar cells was SnO 2 :F/ZnO+CdS-TT/CdTe+CdCl 2 -TT/PEDOT:PSS/Cu-Mo. In our results was clear that the solar cells with PEDOT:PSS processed at different rotational speeds had higher fill factor and thus higher photovoltaic efficiencies. A high photovoltaic efficiency of around 13% was obtained when PEDOT:PSS was deposited at 5000 rpm and the Cu–Mo back contact was processed with a substrate temperature of 200 °C. A particular increment in the photovoltaic efficiency of solar cells close to 8% was achieved, when the Cu–Mo back contact was processed at room temperature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universidad Autónoma de la Ciudad de México
Instituto Politécnico Nacional, Escuela Superior de Física y Matemáticas, San Pedro Zacatenco, C.P. 07738 México City,
References (20)
Show source-provided references
1. Life cycle materials and water management for CdTe photovoltaics10.1016/j.solmat.2013.08.022 ↗
2. Solar cell efficiency tables (version 56)10.1002/pip.3371 ↗
3. The black contac influence on characteristics of CdTe/CdS solar cells10.1016/S0040-6090(99)00760-9 ↗
4. Effects of the Au/CdTe back contact on IV and CV characteristics of Au/CdTe/CdS/TCO solar cells10.1063/1.363946 ↗
5. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
6. New polythiophene derivatives and enhanced photovoltaic effect by a boron compound blended with them in OPVs cells10.1016/j.synthmet.2011.09.009 ↗
7. PTB7: PC71 BM-based solar cells fabricated with the eutectic alloy field’s metal as an alternative cathode and the influence of an electron extraction layer10.1109/JPHOTOV.2016.2617087 ↗
8. ‘Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
9. Electrochemical and XPS studies toward the role of monomeric and polymeric sulfonate counterions in the synthesis, composition, and properties of poly (3,4-ethylenedioxythiophene)10.1021/ma021715k ↗
10. Electrochemical and spectroscopic characterization of polyalkylenedioxythiophenes10.1016/0022-0728(94)87085-3 ↗
11. Fully printed organic solar cells–a review of techniques, challenges and their solutions10.1016/j.opelre.2019.09.002 ↗
12. Conductivity, work function, and environmental stability of PEDOT: PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
13. Conductive polymer PEDOT: PSS back contact for CdTe solar cell10.1016/j.tsf.2010.12.230 ↗
14. PEDOT: PSS as back contact for CdTe solar cells and the effect of PEDOT: PSS conductivity on device performance10.1007/s10854-015-3850-1 ↗
15. Back contacts materials used in thin film CdTe solar cells-A review10.1002/ese3.843 ↗
16. Effect of thermal treatment and deposition conditions of ZnO by radio frequency sputtering on the photovoltaic response of CdTe solar cells10.1016/j.tsf.2022.139427 ↗
17. Study of CdTe recrystallization by hydrated-CdCl2 thermal treatment10.31349/RevMexFis.63.5.469 ↗
18. Influence of thermal treatment on the conductivity and morphology of PEDOT/PSS films10.1016/S0379-6779(03)00280-7 ↗
19. Influence of the growth conditions and postdeposition treatments upon the grain boundary barrier height of CdTe thin films deposited by close space vapor transport10.1063/1.1400090 ↗
20. Effect of substrate temperature on the characterization of molybdenum contacts deposited by DC magnetron sputtering