journal article·2023-06-01

Study on Development of Composite PAM/PI Gel Abrasive Tools and Finishing Performance on the Sapphire Substrates

Liang Zhao, Kaiping Feng, Binghai Lyu, Tianchen Zhao, Zhaozhong Zhou

Publisher page

Abstract

A sol-gel method was proposed to prepare the abrasive tool to solve the problem of abrasive agglomeration in the traditional hot-pressing abrasive tool. In this paper, the effect of AM acrylamide (AM) monomer concentration on the polyacrylamide (PAM) gel performance and the effect of abrasive mass fraction on viscosity were investigated. Experiments about the effect of polyimide (PI) resin mass fraction on the mechanical properties, surface morphologies and friction wear performance of the abrasive tool were conducted. The polishing experiments were conducted to compare the machining effect of the gel abrasive tool, hot-pressing abrasive tool and the polyurethane polishing pad. Results show that the PAM gel has the best uniformity when the concentration of AM monomer reaches 7 wt%, when the mass fraction of PI resin in the abrasive tool reaches 12 wt%, the mechanical properties is the best. When the mass fraction of PI resin is 8 wt%, the gel abrasive tool has the most stable friction coefficient. The average surface roughness reaches 2.706 nm, and the flatness reaches 0.631 μ m when the sapphire was processed by the gel abrasive tool. After Chemical mechanical polishing (CMP), a scratch-free surface was obtained and the average surface roughness reached 0.724 nm.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Zhejiang University

Quzhou University

Funding

Natural Science Foundation of Zhejiang Province · Quzhou science and technology project

References (24)

Show source-provided references
1. Xu · Int. J. Mach. Tools Manuf · 2018 · 130-131 · 1210.1016/j.ijmachtools.2018.03.002 ↗
2. Dong · J. Alloys Compd. · 2019 · 777 · 129410.1016/j.jallcom.2018.11.080 ↗
3. Wang · Precis. Eng. · 2020 · 62 · 4010.1016/j.precisioneng.2019.11.004 ↗
4. Niu · Diam. Relat. Mater. · 2021 · 11810.1016/j.diamond.2021.108499 ↗
5. Chen · Mater. Sci. Semicond. Process. · 2022 · 14310.1016/j.mssp.2022.106556 ↗
6. Surface finishing of aluminium 6061using fabricated flexible abrasive tool10.1016/j.mtcomm.2022.104614 ↗
7. Wan · Materials Science and Engineering of Powder Metallurgy. · 2016 · 21 · 939
8. Wu · Modern Manufacturing Engineering · 2019 · 12 · 910.16731/j.cnki.1671-3133.2019.12.002 ↗
9. Xu · Journal of Mechanical Engineering · 2013 · 49 · 15610.3901/JME.2013.19.156 ↗
10. Wang · Surf. Technol. · 2017 · 46 · 25810.16490/j.cnki.issn.1001-3660.2017.04.042 ↗
11. Lu · Diam. Relat. Mater. · 2017 · 76 · 12310.1016/j.diamond.2017.05.003 ↗
12. Xu · 2020
13. Feng · Advances in Mechanical Engineering · 2021 · 13 · 110.1177/16878140211044929 ↗
14. Feng · Surf. Technol. · 2022 · 51 · 34710.16490/j.cnki.issn.1001-3660.2022.02.035 ↗
15. Feng · ECS, J, Solid State Sci, Technol. · 2021 · 1010.1149/2162-8777/ac0a99 ↗
16. Powder synthetization, gel casting and sintering of BeO
17. Wu · Int. J. Adv. Manuf. Technol. · 2017 · 91 · 153910.1007/s00170-016-9836-1 ↗
18. Wang · Journal of Central South University (Science and Technology) · 2012 · 43 · 1280
19. Gu · 2004 · 57
20. Lu · Journal of the Chinese Ceramic Society · 2014 · 42 · 1146
21. Di · Refractories · 2017 · 51 · 414
22. Duan · Tribology · 2017 · 37 · 71710.16078/j.tribology.2017.06.002 ↗
23. Wang · Journal of Functional Materials and Devices · 2010 · 16 · 206
24. Wu · Precis. Eng. · 2021 · 70 · 11010.1016/j.precisioneng.2021.01.015 ↗