Optimization of Monolithic 3D TSV Transformers for High-Voltage Digital Isolators
Source abstract
Abstract
In this paper, 3D TSV transformers are designed and fabricated for monolithic high-voltage digital isolator applications. The transformers are embedded in the bottom layer of a silicon substrate by using through-silicon-via (TSV) technique without consuming chip surface area, and sandwiched between system circuitries using flip-chip bonding technique for reducing form factor. For a transformer with a size of 1.4 mm × 1.4 mm, a peak primary quality factor of 12.7 and a voltage gain of 0.82 at 34.1 MHz are experimentally demonstrated. Moreover, the performance dependent on the various design parameters is also investigated, including coil sizes, number of winding turns, and coil shapes. Experimental results illustrate the design flexibility of the proposed transformer technology, which allows tradeoffs among key electrical properties such as peak quality factor, mutual inductance, voltage gain, and operating frequency. Asymmetric transformers with different number of turns for the primary and secondary coils are also demonstrated. They can achieve a voltage gain around unity, but sacrifice the bidirectional signal transfer capability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Silicon Carbide Semiconductor Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. 10.1109/TIA.2002.80294410.1109/TIA.2002.802944 ↗
2. Chen B. , in Proc. Power Electron. Specialists Conf., Rhodes, Greece, pp. 3615 (2008).
3. Choi Y. Jeon C. Kim M. , inProc. International Symposium on power semiconductor devices & ICs, Barcelona, Spain, pp. 311 (2009).
4. 10.1109/TPEL.2005.86112110.1109/TPEL.2005.861121 ↗
5. Rouger N. Crebier J. Lesaint O. , in Proc. International Symposium on power semiconductor devices & ICs, San Diego, USA, pp. 356 (2011).10.1109/ISPSD.2011.5890864 ↗
6. Mazumder S. K. Sarkar T. , in Proc. International Symposium on power semiconductor devices & ICs, Barcelona, Spain, pp. 152 (2009).
7. Kojima Y. Nemoto M. Yukutake S. Iwasaki T. Amishiro M. Kanekawa N. Watanabe A. Takeuchi Y. Akiyama N. , in Proc. International Symposium on power semiconductor devices & ICs, Tououse, France, pp. 309 (2000).
8. Munzer M. Ademmer W. Strzalkowski B. Kaschani K. T. , in Proc. International Conference on Power Electronics and Drive Systems, Singapore, pp. 93 (2003).
9. 10.1109/JSSC.2011.217077510.1109/JSSC.2011.2170775 ↗
10. Timothe S. Nicolas R. Jean-Christophe C. Jean-Daniel A. , in Proc. International Symposium on Power Semiconductor Devices & IC’s, San Diego, USA, pp. 360 (2011).10.1109/ISPSD.2011.5890865 ↗
11. 10.1109/TMAG.2007.89259310.1109/TMAG.2007.892593 ↗
12. 10.1109/TPEL.2012.223375910.1109/TPEL.2012.2233759 ↗
13. Wang N. Kulkarni S. Jamieson B. Rohan J. Casey D. Roy S. O’Mathuna C. , in Proc. Applied Power Electronics Conference and Exposition, Orlando, USA, pp. 411 (2012).10.1109/APEC.2012.6165852 ↗
14. 10.1109/LMAG.2011.212955510.1109/LMAG.2011.2129555 ↗
15. Duplessis M. Tesson O. Neuilly F. Tenailleau J. R. Descamps P. , in Proc. European Microwave Conference, Rome, Italy, pp. 1006 (2009).10.23919/EUMC.2009.5295975 ↗
16. 10.1149/2.002305ssl10.1149/2.002305ssl ↗
17. Peng L. Wu R. Fang X. Toyoda Y. Akahane M. Yamaji M. Sumida H. Sin J. K. O. , in Proc. International Symposium on power semiconductor devices & ICs, Kanazawa, Japan, pp. 69 (2013).
18. Dow Chemical, “Processing Procedures for CYCLOTENE 4000 Series Photo-BCB Resins (Puddle Develop Process)”, Dow Chemical Application Note, pp. 1, (2009).
19. 10.1109/4.79262010.1109/4.792620 ↗